× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items
For the ultimate in engine performance, these pistons, installed in a 1275cc block, will blow your doors off! You can't beat cubic inches for performance, and the A-Series block can be bored far bigger than the factory ever imagined. The stock bore is 70.6mm, the 1380 bore is 73.5mm. This is .120" oversize and still leaves room in the block to go to 74mm (1400cc), but only if you offset bore prior to going to 73.5mm. The 73.5mm piston set from Hepolite is great for street and mild racing.
73.5 10:1 9cc 1380 Piston Set With Rings & Pins

73.5 10:1 9cc 1380 Piston Set With Rings & Pins

73.5 10:1 9cc 1380 Piston Set With Rings & Pins
Alternate Products
Classic Austin Mini Cooper 73.5mm , 1380 powermax piston 9cc dish - SINGLE
$254.95 Classic Austin Mini Cooper 73.5mm , 1380 powermax piston 9cc dish - SINGLE
For the ultimate in engine performance, these pistons, installed in a 1275cc block, will blow your doors off! You can't beat cubic inches for performance, and the A-Series block can be bored far bigger than the factory ever imagined. The stock bore is 70.6mm, the 1380 bore is 73.5mm. This is .120" oversize and still leaves room in the block to go to 74mm (1400cc), but only if you offset bore prior to going to 73.5mm. The 73.5mm piston set from Hepolite is great for street and mild racing.
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Related Technical Articles:
Classic Mini Cooper Pistons for High Performance or Stock page34
Created: January 03, 2019
We offer many pistons options for the Classic Mini as built from 1959 t 2000. Standard bore. Various designs and size pistons options for 998cc, 1275cc & 1380cc engines. High or low compression options includes rings and pins.
CHECKING PISTON COMPRESSION RING GAPS
Created: September 21, 2010
The following chart shows the SAE recommended Automotive compression ring end gaps. These recommendations are followed for the majority of the ring line unless a certain application requires deviation from the chart.