Shop by Car
Classic Austin Mini Thin Flywheel Ring Gear

Classic Austin Mini Thin Flywheel Ring Gear

Classic Austin Mini Thin Flywheel Ring Gear
Part No: 22G2613
Internet Price $59.95
The stock ring gear as used on most flywheels is 1/2" wide and weighs about 2.5lbs. Since reducing rotating weight is critical to performance and with the ring gear being on the outer edge of the flywheel, any reduction in this is amplified trememdously. Our "Thin" ring gear is only 3/8" wide and weighs only 1.5lbs. Nice performance advantage!

The thin ring gear is for old type inertia type starters and used on our steel flywheel C-AEG619 and C-AEG421. Originally fitted to automatic cars and old cast flywheels when lightened by various tuning shops in the 79s and 80s which is not recommended for competition. 107 teeth.0.343"wide

Related Technical Articles:
Created: November 03, 2000
Engine mountings are a whizz to fit as the Mini ones fit straight onto any of the other units. Just remove the Metro/AA/1300GT ones and swop the mounts over from the Mini unit. If they’re split, fit new ones, they’re cheap. If using the AA/1300GT unit - it's advisable to cut off the 'wings' on the front plate that carried the engine mounts on the radiator end.
C-AEG619 Ultra-light flywheel fitting instructions
Created: June 21, 2007
Follow these instructions to properly fit your C-AEG619 Ultra-light flywheel, and avoid the problems of clutch slippage and disengagement.
Customer Reviews
Recently Viewed Items