× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items
Pair of 4-pot alloy calipers for 7.5" diameter brake discs with 10" wheels. Kit includes pad retaining pins, but not brake pads. As used on Peter Baldwins mini
Miglia challenge winning car for 3 years.

Note: uses Metro pads which have to be modified by cutting/filing off a small corner part of the metal on two pads. This does not impair the quality of this fitment.

The advantage of alloy calipers is that they dissipate heat quicker, reducing fluid boiling. The design also helps to expel pad dust and heat from the contact area. The 4 pot design provides a much more uniform pressure and far superior braking by virtue of 2 pistons each pushing against the pad,increasing pad contact and brake efficiency.

For vented discs you will have to machine down the 8.4 disc or purchase GBD497 but this will cut most of the vented part away and may not greatly improve the breaking efficiency much more, using vented discs will require drive flanges NAM6450F and a spacer kit C-AJJ4021 for increasing width of calipers. Please state if being used for vented discs.

Another Quality feature of these calipers is that they are fitted with 2 larger bleed screws for ease of bleeding when servicing, we have noted other competitors calipers which only have the one small bleed screw become corroded, seized and break off causing much inconvenience.

Please ensure all the old brake fluid is removed from the system before fitting the new calipers as this prevents any bits in the old contaminated brake fluid from becoming lodged under the bleed nipples which could cause obvious problems.
Classic Mini Brake Calipers Pair Alloy For S With 7.5 Discs Metro Pads

Classic Mini Brake Calipers Pair Alloy For S With 7.5 Discs Metro Pads

Classic Mini Brake Calipers Pair Alloy For S With 7.5 Discs Metro Pads

Classic Mini Brake Calipers Pair Alloy For S With 7.5 Discs Metro Pads

Classic Mini Brake Calipers Pair Alloy For S With 7.5 Discs Metro Pads

Classic Mini Brake Calipers Pair Alloy For S With 7.5 Discs Metro Pads

Classic Mini Brake Calipers Pair Alloy For S With 7.5 Discs Metro Pads
Part No: C-AJJ4023
$695.95
Qty:
Fits the following:
Classic Mini
Pair of 4-pot alloy calipers for 7.5" diameter brake discs with 10" wheels. Kit includes pad retaining pins, but not brake pads. As used on Peter Baldwins mini
Miglia challenge winning car for 3 years.

Note: uses Metro pads which have to be modified by cutting/filing off a small corner part of the metal on two pads. This does not impair the quality of this fitment.

The advantage of alloy calipers is that they dissipate heat quicker, reducing fluid boiling. The design also helps to expel pad dust and heat from the contact area. The 4 pot design provides a much more uniform pressure and far superior braking by virtue of 2 pistons each pushing against the pad,increasing pad contact and brake efficiency.

For vented discs you will have to machine down the 8.4 disc or purchase GBD497 but this will cut most of the vented part away and may not greatly improve the breaking efficiency much more, using vented discs will require drive flanges NAM6450F and a spacer kit C-AJJ4021 for increasing width of calipers. Please state if being used for vented discs.

Another Quality feature of these calipers is that they are fitted with 2 larger bleed screws for ease of bleeding when servicing, we have noted other competitors calipers which only have the one small bleed screw become corroded, seized and break off causing much inconvenience.

Please ensure all the old brake fluid is removed from the system before fitting the new calipers as this prevents any bits in the old contaminated brake fluid from becoming lodged under the bleed nipples which could cause obvious problems.
 
 
Question:
Hello, I'm searching for a vented front brake for 10". Dimension 10x6". Please, could you make a list with all needed components. Do you ship to Germany? Best regards Oliver
 
 
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Related Technical Articles:
Classic Mini Cooper Driveshaft, CV Joints, alloy calipers Page 7
Created: January 03, 2019
Classic Mini Cooper suspension parts including CV Joints, Driveshafts, Subframe packages and alloy calipers. Great selection of everything you need
Classic Mini Cooper Brake Rotors & Drive Flanges page 9
Created: December 28, 2018
See our great selection of every Brake Disc (rotor) as used on the Classic Mini Cooper from 1959 thru 2000. Stock and high performance options for Rotors, Drive Flanges, CV Joints and Brake Pads.
BRAKES - Fitting discs and required ancillaries
Created: December 10, 2000
What you actually need for the disc/drum conversion is pretty straightforward. Disconnect the steering arms, top and bottom swivel-pins, CV joint, and flexible brake pipes at the subframe - that’s it. There are, however, a number of ancillaries to consider.
BRAKES - Fundamental considerations
Created: December 06, 2000
Most folks immediately turn to considering higher engine power outputs. Because of this pre-occupation brakes tend to slide down the improvements priority list. However, they are far more important...