5% Off

800-946-2642
Shop by Car
Classic Austin Mini Suspension Cone (spring) Standard

Classic Austin Mini Suspension Cone (spring) Standard

Classic Austin Mini Suspension Cone (spring) Standard
Qty:
$89.95
Part No: FAM3968
Internet Price $89.95
Alternate Products
Classic Austin Mini Coil Spring Kit Street Blue Set Of 4
$379.95 Classic Austin Mini Coil Spring Kit Street Blue Set Of 4
Classic Austin Mini Cooper S Cone Spring Road/rally Competition
$123.95 Classic Austin Mini Cooper S Cone Spring Road/rally Competition
One of the greatest innovations in the design of the Mini was its rubber cone suspension. The compact design & lasting quality of the rubber cone helped make the Mini what it is today. Designed in the late '50s it was ahead of its time - the only problem is that many of us are still driving around on cones that could have been built in the early '60's. The design is good, but not everlasting! The rubber not only get very hard but it also sags and loses its ability to hold the car upright. It is not uncommon to have a cone sag so badly that it lowers the car 2 or 3 inches and it handles terribly! These should be replaced every 5-7 years depending on use and climate. Measured at the wheel, the spring rates at the static load position are 118 lb/in at the front and 98 lb/in at the rear. With three passengers and 50 lb of luggage, the loads per wheel at the same position are respectively 468 lb and 355 lb. These loads rise to 1,050 lb and 670 lb at full bump and fall to 240 lb and 100 lb when the rebound check is in operation. Early cones were SAE (UNF 1/2x20), all current cones now have metric threads (14mmX2)
Loading...
Loading...
Loading...
Related Technical Articles:
Austin Mini Spring Coil Suspension Connection
Created: March 03, 2016
With questions about replacing or updating the suspension springs or cones, it seems appropriate to have a quick look at all the options available for most Austin Minis and Classic Minis, from Mini Coil Spring Conversion Kits to Coil-Over Suspension Kits and Mini Rubber Cone Suspension Options.
Suspension - Corner Weights and Bump-Steer Basics
Created: February 27, 2001
A surprising number of racers still avoid dealing with them, as with geometry in general they're seen as another 'black art'. Not at all alleviated by the sight of the well-to-do single seater teams producing computer controlled, highly accurate scales to make last minute corner weight adjustments or slipping wafer-thin shims in between steering arms and hubs.
Customer Reviews:
 
( 1)
4 out of 5 stars
Share your thoughts with other customers
Most Helpful Customer Reviews
2 of 7 other people found the following review helpful
 
Suspension cones
By:
Pros: Bought 8 pairs so far.

Cons: Can be tiresome to remove especially if trumpet is corroded to cone!

Other Thoughts: Coat threads of cone with anti-seize agent and steel lip of smaller end where it meets the trumpet. Comes apart easier next time. Replace rubber (blind) grommet above cone on bulkhead & seal with bath caulk (my prefference) to keep moisture out.
Was this review helpful to you?  Yes   No
Loading...
Loading...
Loading...
Recently Viewed Items