Mini Mania
Est. 1974
Shop by Car
 Live Help
800-946-2642
Search
All
Your Price $197.50
Qty:
Mini Roadside Spare Tire Change Kit - R50/52/53/55/57 Cooper & S

Mini Roadside Spare Tire Change Kit - R50/52/53/55/57 Cooper & S

Mini Roadside Spare Tire Change Kit - R50/52/53/55/57 Cooper & S

Mini Roadside Spare Tire Change Kit - R50/52/53/55/57 Cooper & S

Mini Roadside Spare Tire Change Kit - R50/52/53/55/57 Cooper & S
MINI Roadside Tire Change Kit - for all MINI models: 2002-2006 R50 MINI Cooper and R53 Cooper S Hatchback 2005-2008 R52 MINI Cooper and Cooper S Convertibles 2007+ R56 MINI Cooper and Cooper S Hatchback 2008+ R55 MINI Cooper and Cooper S CLUBMAN 2009+ R57 MINI Cooper and Cooper S Convertibles

If your MINI came with runflat tires, you probably did not get these tools. If you replaced your tires with standard non-runflat tires, you need a way to change tires on the roadside. This kit includes all the MINI tools for changing your tires:

[ ] MINI Lifting jack
[ ] MINI Bag for Lifting jack
[ ] MINI Wheel nut wrench
[ ] MINI Wheel chock
[ ] MINI Hub cap puller
[ ] MINI Tow hook

The best part is that all these parts will fit inside the Bag for the lifting jack! This bag has 'stretchy hooks' on the back side so you can secure it in your boot.

Of course, if you don't have a spare tire, you can order our NMW7610 factory spare emergency tire.

Or

Carry the Mobility Kit to repair basic flat tires.

For the complete MINI Took Kit without the storage bag, see NMA7689.

For the 2011 Countryman, see G2NMA7650.

Technical Information:
Better Handling for Road, Track or Autocross
An Excerpt from

Better Handling for Road, Track or Autocross
by Gary Anderson and Don Racine

In the second section of this book, we were particularly complimentary regarding the MINI’s stock suspension, noting that it will reward a good driver and can be well down the priority list of things to work on for improved performance. Now, with a few days of track time under your belt, or maybe a day or two out on the autocross course, and lots of corners that you have been practicing to go around just right, you may be ready to consider tweaking the suspension a bit for better handling performance.

Pirelli Trufeo - Mini Mania Inc.

Once again we’re back to trade-offs. For the average driver, with average passengers, the ability of the car to absorb bumps without rattling the dentures of gran’pa in the back seat is at least as important as how fast the car will get around corners.

As a result, when designing the shocks, springs, and suspension on any car, engineeers are going to err at least slightly on the side of a soft ride. The trade-off is that the car will lean more when going around corners.
In moderate corners, as the car leans, that weight transfer is going to take weight off one of the powered wheels, and push the other wheel more firmly against the pavement, causing it to scrub a little bit. Push that car too hard through a corner and that lean could even turn into a roll. Either way, you’re not going to go around the corner as fast as you would if the car didn’t lean so much.

In the interests of improving your potential to get around corners, you may want to think about changing the trade-off, so that the car may not ride as softly going over bumps, but it will lean less going around corners. To do this, you’ll want to consider replacing the springs, upgrading the shocks, adding a rear sway bar, and changing the rear control arms.

Each of these suspension modifications can be installed separately, if your budget is limited, and they can be installed in the order in which they’re discussed. If you can swing the expense, you can save money and gain maximum improvements in handling, by installing all the components at the same time.

Performance Spring Kit and Shock Upgrades
Two suspension components have the most direct effect on ride quality and handling performance, the springs and the shocks. The length and resilience of the springs determines how easily and how far the body will move when the wheels hit a bump or when weight is transferred in acceleration, braking, or cornering. The shock absorbers reduce the amount of rebound on the springs, helping the body to return to equilibrium after it bounces.

KONI COILOVER SUSP KIT (HEIGHT ADJUSTABLE) - MINI COOPER & S Let’s start with the springs. Because most car owners put more emphasis on ride comfort than on cornering and acceleration performance, most cars are equipped with fairly soft springs that are designed with a good amount of spring travel. The basis Mini Cooper would be considered in this category.

The Mini Cooper S, with its sport suspension (optional on the Mini Cooper) does use heavier (less-resilient) springs with a bit less travel, but the engineers are still assuming you just want good street handling, and aren’t going to want to go a little fast in the twisty bits or take the car on a track or autocross course.

For these purposes, a stiffer spring and lower ride height will be in order. With a stiffer spring, the car won’t cushion you as much on the bumps, but more important, it won’t sway as much on corners, or shift back and forth as much on acceleration and braking. With a shorter spring, the center of gravity will be a little lower, also reducing the amount of side-to-side or front-to-rear body roll.

Good high-performance spring kits are readily available in the aftermarket. These improved spring kits will help your car maintain its stability when starting, stopping, and turning without wallowing around. These kits won’t make your car ride so rough that your passengers will complain, but they will definitely increase the predictability of the car in the corners and help reduce your lap times. A typical upgraded spring kit sells for less than $250.

While most of the good performance spring kits will work with the original equipment shocks, you might want to consider upgrading your shock absorbers at the same time. The shock absorbers work together with your springs so that the car doesn’t just bounce up and down and up and down every time it sways or hits a bump.

Actually, the term “shock absorber” isn’t quite accurate, since the springs actually absorb the shocks from uneven road surfaces, while the shock absorbers help counter the effect of the springs. The English call them “dampers” which is a more accurate term.

The shock absorbers in the MINI are long tubes that are installed between the wheel and the chassis in parallel with the springs. Inside the outer tube is a piston with a special valve that allows fluid to move from the main tube into the piston as the shock absorber compresses and then move back into the main tube at a slower rate when the shock absorber extends.

The shock absorber works by compressing easily when the spring compresses, but then reducing the rate at which the spring expands. So, instead of continuing to oscillate up and down as it would if only the spring were in between the chassis and wheel, the chassis comes back to a neutral position after only one or two movements.

Like original equipment springs, original equipment shocks are designed to do their job with emphasis on comfort, rather than performance. They damp the spring movement just enough to avoid making passengers seasick, but not enough to give a harder ride. To improve your handling, you’ll want even less oscillation so that the car will return to a neutral position more quickly.

By installing performance shocks, you still get some springing action to absorb the bumps and weight changes, but the car will move less and return to neutral more quickly after acceleration or braking, or in between corners. A set of performance shocks designed specifically for the MINI, such as the one by Koni, is a good complement to shorter, stiffer performance springs. One MINI aftermarket catalog offers the Koni shocks for front and rear for a total of about $690, or the combination of performance springs and Koni shocks for a total of $875.

Spax makes a set of “coil-over” shocks that are an alternative to replacing the springs and shocks separately. With this kit, performance springs are wrapped around the shocks, hence the name, and the combined spring and shock is mounted after removing both the stock spring and stock shock at each corner. This alternative is more expensive that installing springs and shocks separately, typically selling for about $1300.

Coil-over kits can certainly be used to improve the handling on street cars. However, they are more likely to be installed by owners who expect to use their MINI frequently on the track or autocross course, since they are available in different spring rates and do offer the means to adjust ride height at each corner.

Different spring rates will be appropriate, depending on the experience of the driver and the frequency with which the car will be used in competition. Springs that are closer to stock firmness will be appropriate for the person who doesn’t compete too often, and also wants to use the car for street use. On the other hand, if the MINI is only going to be used for competition and the driver is quite experienced, the preference will be for a much firmer spring.

By adjusting the ride height at each corner, the owner can balance corner weights to compensate for other changes that have been made in the car, since balance is very important in tuning the car’s handling for the race track.

Ride Height, Camber and Toe
The angles of the wheels to the pavement and to the direction of travel are two important factors in suspension behavior and conseq    uently the way the car will handle. Because these factors have been understood for many years, they are described with the technical terms of “camber” & “toe.”“Camber” is the angle of the wheel when compared with a vertical line

Camber” is the angle of the wheel when compared with a vertical line, when the car is resting on its springs. If the top of the wheel leans in towards the car when the car is sitting still, we say that the wheel has “negative camber.” On the other hand, if the top of the tire leans out when the car is sitting still, that would be “positive camber.”


The camber angle is important because it will determine how much of the surface of the tire tread is in contact with the pavement when the car is going around corners. Remember we noted that the car will sway when it is turning, which will cause the inside wheel to go up and the outside wheel to go down.


Since we want as much of the tire to be in contact with the pavement as possible during the turn, we want the wheels to have a little bit of negative camber. That way, even if the weight over a particular wheel is decreased and the angle of the wheel changes as the car tilts in the corner, the The other angle is called “toe” and measures the extent to which the front edges of the tires point in, or point outfull width of the tread will still be in contact with the pavement throughout the turn.


The other angle is called “toe” and measures the extent to which the front edges of the tires point in, or point out, compared to the rear edges of the tires. If the fronts of the tires are closer together than the rear, the wheels are said to “toe in;” if the rear of the tires are further apart than the front, the tires are said to “toe out.”

The extent to which the tires toe in or toe out determines how easy it is to get the car to turn. With toe-out, the car would want to go straight rather than turn, with toe-in, the car will turn more easily.
It’s important to remember that if you change the springs and shocks to lower the car, this will also change the car’s toe and camber. For this reason, most tuners will recommend that you adjust the rear toe and camber at the same time that you lower the car and change its spring rates in order to keep the car’s handling neutral and to minimize tire wear. In addition, you may wish to make changes yourself to increase the ease with which your MINI turns-in on corners.

Two methods exist to change rear toe-in: you can use a rear camber/toe kit to replace some of the rear suspension fasteners, or you can replace the stock rear control arms with adjustable control arms. The rear camber/toe kit is less expensive than the adjustable control arms, but the adjustable control arms give you a little more control of rear camber and toe and are easier to adjust.

Rear Camber/Toe Kit
The rear camber/toe kit includes four replacement fasteners that replace stock bushings on the rear suspension, and an adjustable control arm. The bushings are designed with the center fasteners off-center so that by rotating the bushings, the center fastener can be moved to change the caster and toe of the rear wheel to a small degree.
These kits should be installed on any car that has been lowered through the use of shorter springs, so that the rear suspension can be corrected for the lowered height. They typically sell for around $300 and can be most easily installed when lowering hardware is installed. Adjustable rear control arms also accomplish the same objective of correcting rear toe and camber on lowered cars. Though more expensive than the camber/toe kit, they do offer a greater range of adjustment and are somewhat easier to adjust.

Adjustable Rear Control Arm Kit
If you peek under the back of your Mini, you’ll see four support arms, each about two feet long, two to a side, extending from the center of the chassis out to the rear wheels in sideways Vs. These “control arms” are there to make sure that the wheels stay vertical in hard cornering. Their positions also determine the extent to which the rear wheels toe-out or toe-in, and hence contribute to keeping the MINI going in a straight line and also to how easy it is to make the vehicle turn.

However, the stock control arms are not adjustable. The factory set-up can be changed by modifying the control arms mounting points, but the range of adjustment is limited, and adjustment isn’t easy to do. To permit a wider range of adjustment in camber and toe, and to make the adjustment easier, aftermarket suppliers make adjustable control arms that replace the stock control arms on the rear suspension. ULTRIK REAR ADJ. CONTROL ARM KIT (4) - MINI COOPER AND S

With these rear control arms installed, it is possible to adjust the camber and toe of the rear wheels after performance springs and shocks are installed. The control arms are adjusted so that the wheels will have a slight amount of toe-in and a slight amount of negative camber. The toe-in adjustment reduces the car’s tendency to understeer by allowing the rear wheels to turn more easily, and the negative camber assures that as much tire tread as possible is in contact with the pavement during cornering.

Rear control arms are available for about $495. They can be installed easily and with little additional expense if they are installed at the same time that high-performance springs and shocks are installed. It doesn’t make sense to install the control arms before installing modified springs and shocks, but they can also be installed at any time after the springs and shocks have been installed to allow additional suspension tuning.

Anti-sway Bars to Reduce Understeer
In a front-wheel drive car, all of the steering and power comes from the front wheels. The usual result is that the typical front-wheel car has a tendency to understeer. If the car is going to fast, or turned too abruptly when entering a corner, the car will push ahead in a straight line, rather than turning to follow the direction of the front wheels.

PERFORMANCE REAR SWAY BAR UPGRADE 20MM - MINI COOPER AND SUndersteer is a good thing for the average driver turning the average corner, since the car is less likely to swerve or skid, should the driver turn the steering wheel too far or too fast. In fact, even most modern rear-wheel cars are engineered to have a little understeer.

However, since we want to get around the corners faster than the average driver, and we’re willing to invest some time and practice in learning to drive the car better, reducing that understeer seems like a good idea. Though it seems counterintuitive we can reduce the understeer on the front wheels by altering one component of the rear suspension, the rear “sway bar.”

The MINI Cooper S has a sway bar on the rear for just this purpose, to help tune the suspension. The rear sway bar keeps the rear wheels of the car more level as the car goes into corners. A sway bar—or as it is generally and more accurately referred to, an “anti-sway bar”—works by connecting the wheels on either side of the car to one another and to the chassis.

As the inside corner of the chassis begins to move up when the car rolls toward the outside of the turn, the sway bar transmits some of this motion to the outside rear corner. The net result is that the inside corner doesn’t go up as much, and the outside corner goes up more, than they would without the sway bar.

Again, think of the car as if it is balanced on a pin at its center. If we can keep the back end flatter on the turns so that the inside rear corner of the chassis doesn’t rise, less pressure is put on the outside front wheel and the car doesn’t push, or understeer as much. Instead, the rear end of the car comes around more easily. Instead of resisting the turn, the car will follow the line of the turn more easily.
However, the stock sway bar installed on the MINI represents a compromise between reducing chassis roll and affecting ride comfort in favor of ride comfort. It is also fixed in place, so it doesn’t allow any choice of response regardless of what you’ll be using your MINI for.

To improve on that situation, aftermarket suppliers have developed a stiffer rear sway bar that also has an adjustment range from harder to softer responsiveness. The original sway bar is 13mm thick, while one typical aftermarket sway bar is 16mm thick. The thicker bar is capable of transmitting more force from one side of the car to the other, helping the car stay level and balanced on tighter turns.

This upgraded sway bar also has sliding attachment points at each end, so that the range of movement can be changed. With these adjustments, you can leave it on the soft setting for daily use, so that the car sways a little bit more, but doesn’t ride quite so roughly. When you’re getting the car ready for a track day or an autocross competition, you just release the tension bolts and slide the attachments to the hard setting to increase the car’s cornering capability.

The typical dual-use adjustable rear sway bar kit, including the sway bar, connecting arms, bushings, and fasteners is available for about $250. The installation is straightforward, but does require putting the car on jack stands, and then removing the old bar and getting the new bar to slide in around the rear suspension components and wiring harness, so you may wish to have an experienced professional shop do the job for you.

Even heavier rear anti-sway bars are available for drivers who expect to spend a greater proportion of their time on the track or do serious autocross compeition, might consider one of the heavier rear anti-sway bar that are also available. Some of these heavier bars have a more positive multi-position adjustment mechanism. The heavier rear bar  is generally used in conjunction with the substitution of a heavier front roll bar in order to keep the car balanced from front to rear as well as side to side.

Front and Rear Strut Brace Kits
The chassis of the MINI Cooper and Cooper S is well-designed and pretty stiff just as it comes from the factory, which is one of the reasons why your MINI felt satisfying to drive when you first drove it away from the dealer. Several reviewers have remarked that the car felt “as if it had been carved from one block of steel.”

CARBON FIBER FRONT STRUT BRACE - MINI COOPER S 	 CARBON FIBER FRONT STRUT BRACE - MINI COOPER SHowever, as you start to drive the car harder, on track days or around the autocross cones, or just like tossing it around backroads corners, you might want to stiffen up the chassis just a bit more. This upgrade is one of the easiest in this book. It is accomplished simply by bolting a “strut brace” across the front of the car in the engine compartment, to connect the tops of the two front strut towers to one another.

The benefit of this brace is to stiffen the front of the car to reduce flex in the suspension. Where the stock MINI feels pretty stiff and strong in corners, the added strut brace makes it feel really solid so that the car turns into the corners more easily without hesitation. Of course, since the brace is visible to anyone looking in the engine compartment and is an attractive accessory, it certainly adds to the performance credibility of the car.

A stiff, well-constructed strut brace is desirable on a car that is running with low-profile, high-performance tires and especially desirable when installed in conjunction with a lowered suspension. A typical well-engineered strut brace will cost about $325, and can easily be installed by anyone with the right-sized wrenches in less than an afternoon.

Chassis stiffness becomes increasingly important as the MINI is used more often for serious autocrossing, and is an important element in suspension tuning. For this reason, many tuners also prefer to add a rear strut brace to the MINI before making other changes to the rear suspension of the car. Like the front suspension, this additional component is bolted on to the rear suspension mounts and extends across the car. A good rear strut brace can be purchased for about $200 and is easily installed.

One at a Time or All at Once
In the above discussion of suspension improvements, we’ve discussed each of the upgrades in terms of what they will contribute to handling. If you’re working to a budget, there’s no reason why you shouldn’t buy the upgrades one at a time, as you can afford them, in the order in which we’ve discussed them. The advantage to that is that you’ll be able to feel the difference each of the components makes to the overall handling of your MINI.

 

Typical Suspension Upgrade Prices

Stiffer, shorter springs                 $240

Koni front shocks                         $360

Koni rear shocks                          $330

Adjustable rear control arms kit    $500

Adjustable rear anti-sway bar kit    $250

Front strut brace                           $325

Rear strut brace                           $200                          

Total                                        $2205

(Cost savings of approximately 10 percent are available from
many suppliers if all components are purchased at the same time)

 

On the other hand, because the components do have an effect on one another, and each works better when the others are installed, the alternative strategy of installing them all at once is preferable, if you can manage it. In  fact, because the various adjustments and upgrades to the suspension work best when all are in place, several suppliers offer suspension upgrade kits that include most or all of the components we’ve discussed, at a lower price than if the components are bought separately.

For example, all the suspension upgrades suggested here, including shorter, heavier springs, adjustable shocks, rear sway bar, and rear control arms, plus the front and rear strut braces, can be purchased from MiniMania as a single kit. The complete MiniMania, “high-performance suspension upgrade kit” currently sells for for about $2000. Of course, installation costs also are significantly reduced if all the components are installed at the same time.

 

 


Read Full Article
Customer Reviews
Write a customer review
Review this item and receive a $5 coupon off you're next purchase!* Click Here For Details
Click Here For Details