PUMP WATER 998cc 1098cc and 1275cc

Found: 1 Items

My Wish List

View Cart

Click Image for Larger View

PUMP WATER 998cc 1098cc and 1275cc

It's warmer here than in the UK. This higher capacity water pump moves more coolant than the stock one, and is better quality. GWP134 has by-pass hose take off, GWP154 is without take off. These super high quality water pumps have a much larger than stock impeller; it sticks into the block slightly more than 1/2". This water pump will fit all 1275cc blocks and all 998cc blocks after 1969, and with a slight amount of work on the impeller can be made to fit a small bore block. Use of a high capacity water pump helps to reduce cavitation in the water jacket, particularly at high RPM, as well as circulating a greater volume of coolant. Further reduction of cavitation is achieved by using a large diameter water pump pulley CAM6408 as originally fitted to the Cooper S and reintroduced on the A-Plus engines. It is necessary to check clearance between the large pulley and the head; if a lot of material has been machined from the head face it may foul the pulley. Small bore engines with 12G940 heads can't use CAM6408 and it is necessary to modify the top edge of the high capacity water pump or the 12G940 head will rest on the pump and not seal properly; modify for at least 1/16" gap.

$44.95

Part No:

Car(s):
MINI,MORRIS,SPRI

Also Purchased

May we Suggest

Shipping Info

Warranty

Price Guarantee

Customer Reviews

[0]

Customers that bought GWP134 also purchased the following:

	LOWER BOTTOM RADIATOR HOSE MINI & MINI COOPER [More Info]		HOSE RADIATOR LOWER BOTTOM KEVLAR REINFORCED- MINI & COOPER [More Info]
	GASKET, THERMOSTAT HOUSING [More Info]		WATER PUMP GASKET [More Info]
	THERMOSTAT FOR ALL YEARS OF THE MINI 160F [More Info]		THERMOSTAT 80C/180F [More Info]

VTEC MTK ALUMINUM RADIATOR KIT When you are upgrading your Classic Mini Cooper to a Honda Vtec K Series engine this Aluminum Radiator is the best way to have the best of all the parts you might use in the conversion.

List Price: $475.00

On SALE: $410.00

NEVADA CITY ADVENTURE T-SHIRT 100% White Cotton T-Shirt with the Nevada City Adventure artwork on the back and a smaller Nevada City Adventure logo in front. Select Size from the pull-down menu.

Size options available

MPI FRONT SUBFRAME The front subframe on a Mini will never have a rust problem only because the engine/trans always seems to provide a certain amount of oil for preservation. BUT, most any accident will result in damag [ More Info]

$1,695.00

WIDE WHEEL FENDER KIT FOR MINI TEC VTEC CONVERSION Set of four flares from Mini Tec bolt on to your Saloon Mini, for tires up to 7 inches wide. Primered, ready to paint. Use with extended flip-front for the Mini Tec MT10000 VTEC Conversion Kit, Item < [ More Info]

List Price: $369.00

On SALE: $320.00