Mini Cooper Parts Catalog

Chapter Quick Navigation:

Cylinder Head, 998CC, 'A' Plus 1980 on - Chapter 2 Pages 24-25

Cylinder Head, 998CC, 'A' Plus 1980 on

No.	Part No.	Description	Qty	Remarks
1	CAM6517	Cylinder head	1	L.C.
1	CAM6812	Cylinder head - use TAM2168	1	H.C. Triple collet groove
1	TAM2168	Cylinder head	1	Lead free
10	88G221	Gasket	1
11	GHF200	Nut	2
12	LWZ304	Washer for nut	2
13	AEA762	Valve insert inlet	4
13	TAM2152	Valve insert inlet	4	Lead free
13	AEA763	Valve insert exhaust, was 2A640	4	Use TAM2068
13	TAM2068	Valve insert exhaust	4	Lead free
14	TAM1062	Inlet valve H.C. and lead free	4	Triple collet groove
14	TAM1770	Exhaust valve H.C. and lead free	4	Triple collet groove
14	CAM6502	Inlet valve, collett groove put up .140 thou from valve tip	4	Use 12G1015 spring
14	CAM6503	Exhaust valve collett grve put up .140 thou from valve tip	4	Use 12G1015 spring
14	CAM6505	Exhaust valve collett grve put up .140 thou from valve tip	4	Lead free, chrome stem
14	CAM6391	Inlet valve, top of collett groove .220 thou from valve tip	4	Use AEA311 spring
14	12A1987	Exh valve, top of collett groove .220 thou from valve tip	4	Use AEA311 spring
15	12G1015	Valve spring for all triple collett valves	8	Plus CAM6502/3/5
15	AEA311	Valve spring	8	For 12A1987/CAM6391
16	88G617	Top cap, single groove	8
16	AHU1897	Top cap, triple groove	8
17	ADU4905	Valve oil seal	8
18	88G459	Cotter	8 prs	Single groove valve
18	CAM6975	Cotter	8 prs	Triple groove valve
19	12A1950	Rocker shaft	1
2	CHS2515	Stud, water elbow	3
20	12G1926	Rocker shaft post with oil feed hole	3
21	12G1927	Rocker shaft post tapped	1
22	2A515	Rocker shaft post locking plate	1	NLA use 2A259
23	2A258	Locating plate plug	1
24	6K556	Rocker spacer spring	3
25	CAM289	Rocker sintered	8
26	12G1221	Rocker forged	8	Alternative in sets
27	2A21	Rocker bush	8	Not fitted to CAM289
28	AEG167	Adjusting screw	8
29	NT605061	Adjusting nut	8
3	51K885	Stud, rocker cover long	2
30	51K1193	Cylinder head nut, until CAM4545	9
31	GHF302	Washer, until CAM4545 fitted	9
32	CAM4545	Head nut with built in washer	9
33	GUG2506HG	Cylinder head gasket, was TAM2121B and AJM302	1
4	51K1473	Stud, rockers short	2
5	53K487	Stud, manifold	6
6	53K402	Stud, heater tap valve take-off	2
7	12G1111	Valve guide, was 2A608	8	12G1963 alternative
8	RU612123	Oil hole plug	1
9	2A180	Blanking plate, heater take-off	1	If required

Return to TOC

Internet Specials!

	SPRINTBOOSTER PLUS - SUBARU IMPREZA/FORESTER 06+ [More Info]		SPRINTBOOSTER STD - SUBARU IMPREZA/FORESTER 06 UP [More Info]		SPRINTBOOSTER STD - MAZDA RX-8 04+ MX5/MAZDA 6/SPEED 6 06+ [More Info]
	SPRINTBOOSTER PLUS - JEEP COMPASS PATROIT CALIBER [More Info]		SPRINTBOOSTER STD - JEEP COMPASS PATROIT CALIBER [More Info]		SPRINT BOOSTER PLUS - CORVETTE Z06 [More Info]

SERVICE KIT FOR HS2 CARB This kit services a single or left/front HS2 carb. Includes Gaskets, Needle & Seat and Jet Assembly. See CSK59 for the twin carb service kit.

List Price: $59.95

On SALE: $55.95

VALVE STEM CAPS (SET OF 4) If you run tube or tubless tires you will have a valve stem on the wheel. This is the ideal way to dress-up even the smallest part of your car.
MSA1123 = "Cooper" Valve Caps, set of 4
MSA11 [ More Info]

Design options available

MINI TEC FIBERLASS EXTENDED FLIP FRONT END KIT FOR VTEC This sturdy fiberglass replica of the round-nosed Mini is pre-extended about 4 inches for the MT10000 Honda VTEC conversion. It comes with the hinges and latches for mounting. See more info on the [ More Info]

List Price: $1,099.00

On SALE: $967.50

WIDE WHEEL FENDER KIT FOR MINI TEC VTEC CONVERSION Set of four flares from Mini Tec bolt on to your Saloon Mini, for tires up to 7 inches wide. Primered, ready to paint. Use with extended flip-front for the Mini Tec MT10000 VTEC Conversion Kit, Item < [ More Info]

List Price: $369.00

On SALE: $320.00