Mini Cooper Parts Catalog

Chapter Quick Navigation:

- Chapter 3 Pages 6-7

No.	Part No.	Description	Qty	Remarks
1	22G1837	Flywheel housing	1	NLA, use FAM6257/9
1	DAM6074	Flywheel housing	1	Turbo only
1	DAM6259	Flywheel housing - use with AHU1707 or DAM3745	1	998cc,
1	TRD10015	Flywheel housing, was DAM6257, use with AHU1707	1	1300cc (Breather hole)
10	GHF103	Screw, short was SH605081	3	DAM7753 bolt, alternative
11	22A1762	Locktab	1	Part of 18G8086
12	22A1761	Locktab	1	Part of 18G8086
13	2A3521	Locktab	1	Part of 18G8086
14	FNZ505	Nut	9
15	GHF332	Washer was LWZ305	4
16	22A1241	Locktab	1	Part of 18G8086
17	88G300	Cover, with timing hole	1
17	AHU1106	Cover - Verto with no timing hole	1
18	DAM7755	Bolt - clutch cover	8
19	2A3635	Cover for timing hole	1
2	AHU1707	Idler bearing 1.375" 34.92mm O/D	1	.875" I/D
2	DAM3745	Idler bearing 1.375" 34.92mm O/D	1	.750" I/D
2	13H7848	Idler bearing 1.065" 27.05mm O/D	1	4 synchro early
2	88G302	Idler bearing 1.004" 25.5mm O/D	1	3 synchro
20	SH604041	Screw for timing hole cover	2
21	GHF331	Washer	2
22	22A180	Plunger, press fit for release bearing GRB201	1
22	DAM1955	Plunger, which takes GRB238 and DAM2413	1	Release bearing fit loose on plunger
23	DAM2413	Clip, to hold GRB238 to DAM1955	1
24	DAM5353	Plunger verto clutch	1	1982 on
25	22A427	Plunger stop	1
26	NT610041	Nut, was FNZ210	1
27	22A2204	Clutch arm, was 2A3518, pre Verto	1
28	DAM5355	Clutch arm short verto only	1	1982 on
29	CLZ628	Clevis pin, lever to case	1
3	AAU8424	1st motion shaft nose bearing, was 13H6080	1	13H6080 not interchangable
3	ADU6033	1st motion shaft nose bearing 1.692" 42.98mm O/D	1	Turbo only
30	GHF302	Washer, was PWZ106	1
31	GHF101	Adjusting screw was HZS409	1
32	FNZ604	Locking nut	1
33	CLZ518	Clevis pin, lever to push rod	1
34	2A3601	Spring anchor	1
35	GHF301	Washer was FWZ105	1
36	1G5999	Clutch spring	1
37	2A3600	Anchor spring end	1	Pre Verto
38	13H396	Slave cylinder push rod	1	All Minis
4	2A3643	Circlip for AAU8424 in flywheel housing	1
4	ADU7194	Circlip for ADU6033 in flywheel housing	1	Turbo only
5	CCN110	Circlip for holding 1st motion shaft bearing	1
6	13H2934	Clutch oil seal (DAM2821 seal protector available)	1
6	LVF10005	Clutch oil seal (reluctor type flywheel)	1	Injection only
7	22A2237	Flywheel casing gasket	1
8	BH605141	Clutch case screw, long was BH605141	3	DAM7758 bolt, alternative
9	GHF332	Clutch case washer was LWZ305	3

Return to TOC

Internet Specials!

	BMW OIL FILTER - MOST 2006+ 6 CYLINDER - N52/N54 [More Info]		BMW OIL FILTER - 2004 & 2005 V8 4.4L N62 [More Info]		BMW OIL FILTER OEM REPLACEMENT - E60 M5, E63 M6 V10 [More Info]
	BMW OIL FILTER REPLACEMENT - 6 CYL W/ BLK PLASTIC OIL CAP [More Info]		BMW OIL FILTER - MOST 2006+ 6 CYL, AND MANY V8 & V12 ENGINES [More Info]		BMW OIL FILTER REPLACEMENT - E36 318i/318ti 96-99, Z3 1.9 [More Info]

VTEC MTK ALUMINUM RADIATOR KIT When you are upgrading your Classic Mini Cooper to a Honda Vtec K Series engine this Aluminum Radiator is the best way to have the best of all the parts you might use in the conversion.

List Price: $475.00

On SALE: $410.00

'COOPER S' EMBROIDERED HAT CAP - BLACK (NEW LOGO) High quality, all-cotton "low profile" black hat with red trim and embroidered "Cooper S" logo. Adjustable band, one size fits all.

List Price: $14.95

On SALE: $13.95

ULTRIK MOBILITY KIT - COMPRESSOR, TIRE SEALANT AND BAG If your little car is not running on run-flat tires and you don't have the space or desire to carry a spare wheel and tire- then this kit is for you! The ULTRIK Mobility Kit contains a 12v compressor [ More Info]

List Price: $69.95

On SALE: $59.95

MINI TEC FIBERLASS EXTENDED FLIP FRONT END KIT FOR VTEC This sturdy fiberglass replica of the round-nosed Mini is pre-extended about 4 inches for the MT10000 Honda VTEC conversion. It comes with the hinges and latches for mounting. See more info on the [ More Info]

List Price: $1,099.00

On SALE: $967.50