Classic Mini Cooper - VERTO CLUTCH ASSEMBLY w/o FLYWHEEL 1275CC CARB MIN

Found: 1 Items

My Wish List

View Cart

Click Image for Larger View

VERTO CLUTCH ASSEMBLY w/o FLYWHEEL 1275CC CARB MINI COOPER

This is the complete verto clutch assembly for pre injected cars that have a pre engaged starter, 1275 Models with the 190mm wide clutch plate(Plus a few very late 998cc). This clutch can be used on any non injected car but if using on a car previously fitted with a 180mm wide plate the flwywheel surface must be perfect or the plate will judder and cause severe wear.
This 3 piece kit has an AP pressure plate with best clamping pressure and a Valeo 190mm plate--GCK151AF has same pressure but a 180mm AP plate. Technical Leaflet: This cover assembly is supplied without the hub with which it is attached to the end of the crankshaft. Once the clutch unit to be replaced has been removed from the vehicle the central hub should be removed from the cover assembly. Avoid damage to the hub flange and crank taper during operation. The hub should now be installed in the replacement assy. Locate the hub in the main cover pressing as shown in the illustration, ensuring that the location diameter is burr free, and, using the six new bolts provided, tighten them down in a diagonal pattern to a torque of 60 Nm. (44 ibft.)

Share

List Price: $199.95

Internet Only 15% Off: $169.96

Part No:

Car(s):
MINI

One or more Information, Installation or Applicaition Article is available for this item.

Also Purchased

May we Suggest

Shipping Info

Warranty

Price Guarantee

Customer Reviews

[0]

Customers that bought GCU90122MS also purchased the following:

COVER DASHPOT HS4 CHROME

$24.95

ADE SU NEEDLE

List Price: $24.95

On CLEARANCE: $10.00

CYLINDER HEAD REBUILT STOCK SPEC FOR MPI MINI The last of the Mini Cooper production were all done with Feul Injection. And the last coule years of Fuel Injection used 2 injectors and thus are often call "Twin" or 'Multi" point injected. These [ More Info]

List Price: $995.00

On CLEARANCE: $495.00

FRONT END HINGE KIT FOR STEEL FR.END VTEC & STD. MINI This kit comes with the hinges and brackets necessary to flip your front end vertically as shown in the above photos. These hinges are now smoother than ever with improved hardware and machining. Hing [ More Info]

List Price: $235.00

On SALE: $199.75