March Month Coupon 5% off
Oil
Motor Oils - It Is So Very Misunderstood
Created: August 23, 2011
I think it is time to go over passenger car automotive engine oils in detail. I will be writing several articles to be published soon so I will try to get some of it out here. I feel this is a very general topic for all car owners on this board.
Motor Oils - It Is So Very Misunderstood - part 2
Created: August 23, 2011
I think it is time to go over passenger car automotive engine oils in detail. I will be writing several articles to be published soon so I will try to get some of it out here. I feel this is a very general topic for all car owners on this board.
LUBRICATION - Oil, what it does and how
Created: February 03, 2011
It’s criminal. Folk spend fortunes putting together super-sonic motors, only to skimp on the oil they use. Why? Oil’s oil right? Wrong. Even if it’s a standard engine, it deserves TLC considering it's extremely hostile working environment.
LUBRICATION - Temperature critical
Created: February 03, 2011
The correct running temperature of the oil is perhaps even more important than the water/coolant temperatures - so let us consider how to control them. Mainly because it seems to be the most misunderstood of the whole process, and oil cooler fitment almost a reflex when over-heating occurs where a tuned engine of any type is concerned. And in many cases on standard production road cars for that matter.
MAGDOG3 INSTALLATION INSTRUCTIONS
Created: June 24, 2008
MAGDOG3 INSTALLATION INSTRUCTIONS
Created: January 08, 2007
About a year ago I read about the reduction of zinc dialkyl dithiophosphate (ZDDP) in the oils supplied with API approval that could affect sliding and high pressure (EP) friction in our cars. The reduction of these chemicals in supplied oils was based on the fact that phosphates reduce the effectiveness and eventually damage catalytic converters and introduce minute amounts of pollutants into our atmosphere.
Sureflow oil pump C-AEG413
Created: January 30, 2000
Being the heart of the engine, it is obviously essential that the pump is in prime condition when fitted. Due to robotised manufacture of the commercially produced pumps, tolerances have been opened up to facilitate rapid production and assembly.