Has Anybody Used GoJaks on a Mini?
Created by: Rick Anderson
Total posts: 663
Last post: Apr 22, 2024 Member since:May 18, 2002
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
|
I use the Zendex Go Jacks G5211 on my mini saloon with 165/70/12, my Focus with 235/40/18, and a boat trailer with 145/80/12.
The only issue on the mini is getting them under the car, the rear is no problem, the front is tight.
A word of caution don't store the car on the Go Jacks you'll end up with "dents" from the rollers in the tires which will make the tire ride like they're square.
The only issue on the mini is getting them under the car, the rear is no problem, the front is tight.
A word of caution don't store the car on the Go Jacks you'll end up with "dents" from the rollers in the tires which will make the tire ride like they're square.
Total posts: 1456
Last post: Jan 31, 2022 Member since:Sep 8, 2003
|
Cars in Garage: 1
Photos: 186 WorkBench Posts: 0 |
|
I use 4 of the small wooden furniture dollies, they work a treat!
https://www.harborfreight.com/18-in-x-12-in-1000-lb-capacity-hardwood-dolly-63098.html
https://www.harborfreight.com/18-in-x-12-in-1000-lb-capacity-hardwood-dolly-63098.html
Sean Windrum
1996 MGF VVC
1970 1275 GT Racer
66 Austin Countryman
63 997 Cooper (Under Construction)
63 MG 1100
Total posts: 76
Last post: May 29, 2023 Member since:Mar 8, 2013
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
I have a set of the super slicks from gojack and use them on my Moke all the time. There are several copies of them available now. I am told the ones with the hydraulics are not as reliable .
Total posts: 4161
Last post: Jun 3, 2023 Member since:Aug 15, 2001
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
|
Thank you, I contacted the company and they are going to let me know which ones they recommend since there are a lot of models.
Total posts: 1352
Last post: Mar 29, 2024 Member since:Aug 8, 2002
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
|
I used a friends Harbor Freight (61917) version on an Elf with 145/10 tires. They worked fine rolling around the garage.
Kelley
Kelley
"If you can afford the car, you can afford the manual..."
Total posts: 946
Last post: Dec 26, 2023 Member since:Aug 6, 2011
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
|
Total posts: 4161
Last post: Jun 3, 2023 Member since:Aug 15, 2001
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
|
II want a set of these to move my Mini and Moke around the shop but wondering if the 10" tires are too small. If the arms don't slide close enough together the tire will obviously touch the ground.
://www.summitracing.com/parts/ztc-5211
://www.summitracing.com/parts/ztc-5211