2008 electric power steering
Created by: Mini2008
Orig. Posting Date | User Name | Edit Date |
Nov 17, 2021 02:59PM | kenatminimania | |
Nov 8, 2021 04:33PM | Mini2008 |
Total posts: 2271
Last post: May 23, 2023 Member since:Dec 29, 2004
|
Cars in Garage: 1
Photos: 9 WorkBench Posts: 0 |
|
Necessary preliminary tasks:
Remove underbody protection
Disconnect negative battery terminal
Remove air intake silencer housing
Unlock plug connection (1) in engine compartment and disconnect.
Lift vehicle and release the screws of the EPS unit (see arrow) from below.
Replace screws.
Tightening torque: 24 Nm
All vehicles with manual gearbox:
Lower vehicle and remove EPS unit in engine compartment manually.
All vehicles with automatic transmission:
Release anti-roll bar link left and right on the anti-roll bar.
Turn anti-roll bar up.
Remove air conditioning line holder at oil sump.
Remove EPS unit from below, to the right side.
Total posts: 1
Last post: Nov 8, 2021 Member since:Nov 8, 2021
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
Trying to remove electric assist power steering motor. 2 bolts visible are removed but I'm afraid to apply and more pressure without figuring out if anything else holds it in place.