Mini Cooper Ignition UPGRADE Kit. If your Mini is approaching high mileage, starting to run a little 'rough', or you noticed your gas mileage falling off - the ignition system is one of the three main areas (air, fuel, & ignition) that you need to inspect. This Kit includes high quality Ignition Coil Upgrade.

Fits the following models:

2007-2013 R56 MINI Cooper and Cooper S Hardtop
2008-2014 R55 MINI Cooper and Cooper S Clubman
2009-2015 R57 MINI Cooper and Cooper S Convertible
2012-2015 R58 MINI Cooper and Cooper S Coupe
2012-2015 R59 MINI Cooper and Cooper S Roadster
2011-2016 R60 MINI Cooper and Cooper S Countryman
2013-2016 R61 MINI Cooper and Cooper S Paceman

These Kits are Model and Production Date dependent - select accordingly.

These Kits include the following:

• Set of 4 Upgraded IGNITION PROJECTS Ignition Coils
• Set of 4 OEM Spark Plugs

IGNITION PROJECTS COILS

The IP Coils are the ignition coil with a high power amplifier built in to it. The IP Coils produce 4 times more spark energy than stock coils and also generate an ultra fast multi spark discharge of 10 sparks up to highest RPM. The spark amperage is increased 100%, allowing the spark to reach many more molecules and therefore accelerate the ignition and combustion process. This is extremely important in forced induction applications but also improves the performance of normally aspirated engines.

The IP Coils increases horsepower and torque throughout the entire rpm range while reducing fuel consumption. The IP Coil is OBD II compliant.

Installation is easy. Direct bolt-in to the engine, no splicing or cutting into stock wiring, simply replace the stock coils with our Plasma Direct Coils and ready to go!

IGNITION PROJECTS was established in the Southern California in 2011, with the vision of developing new and innovative products to enhance vehicle ignition systems. Our mission is to develop stronger ignition systems in order to optimize engine performance, lower emission ratings and improve fuel consumption. We develop and manufacture our products in our R&D facility located in the City of Tustin in the heart of Orange County, California. With new technological advances through our research and development process, IGNITION PROJECTS has become a leading Ignition Manufacturer in the global market and we are proud to have our products produced right here in the USA.

NOTE: Some States (like California) have ever tightening requirements for emissions testing and inspections. Always check your local regulations on compliance for street use.

MINI Cooper Coils and Spark Plugs Ignition Upgrade Kit for N14 engines. If your Mini is approaching high mileage, starting to run a little 'rough', or you noticed your gas mileage falling off - the ignition system is one of the three main areas (air, fuel, & ignition) that you need to inspect. This Kit includes high quality Ignition Coil Upgrade.

Fits the following Cooper S models with the N14 engine:

2007-2010 R56 MINI Cooper S Hardtop
2008-2010 R55 MINI Cooper S Clubman
2009-2010 R57 MINI Cooper S Convertible

These Kits are Model and Production Date dependent - select accordingly.

This Kit includes the following:

• Set of 4 Upgraded IGNITION PROJECTS Ignition Coils
• Set of 4 OEM Spark Plugs

IGNITION PROJECTS COILS

The IP Coils are the ignition coil with a high power amplifier built in to it. The IP Coils produce 4 times more spark energy than stock coils and also generate an ultra fast multi spark discharge of 10 sparks up to highest RPM. The spark amperage is increased 100%, allowing the spark to reach many more molecules and therefore accelerate the ignition and combustion process. This is extremely important in forced induction applications but also improves the performance of normally aspirated engines.

The IP Coils increases horsepower and torque throughout the entire rpm range while reducing fuel consumption. The IP Coil is OBD II compliant.

Installation is easy. Direct bolt-in to the engine, no splicing or cutting into stock wiring, simply replace the stock coils with our Plasma Direct Coils and ready to go!

IGNITION PROJECTS was established in the Southern California in 2011, with the vision of developing new and innovative products to enhance vehicle ignition systems. Our mission is to develop stronger ignition systems in order to optimize engine performance, lower emission ratings and improve fuel consumption. We develop and manufacture our products in our R&D facility located in the City of Tustin in the heart of Orange County, California. With new technological advances through our research and development process, IGNITION PROJECTS has become a leading Ignition Manufacturer in the global market and we are proud to have our products produced right here in the USA.

NOTE: Some States (like California) have ever tightening requirements for emissions testing and inspections. Always check your local regulations on compliance for street use.

Mini Cooper Coils and Spark Plugs Ignition Upgrade Kit for N18 engines. If your Mini is approaching high mileage, starting to run a little 'rough', or you noticed your gas mileage falling off - the ignition system is one of the three main areas (air, fuel, & ignition) that you need to inspect. This Kit includes high quality Ignition Coil Upgrade.

Fits the following Cooper S models with the N18 engine:

2011-2013 R56 MINI Cooper S Hardtop
2011-2014 R55 MINI Cooper S Clubman
2011-2015 R57 MINI Cooper S Convertible
2012-2015 R58 MINI Cooper S Coupe
2012-2015 R59 MINI Cooper S Roadster
2011-2016 R60 MINI Cooper S Countryman
2013-2016 R61 MINI Cooper S Paceman

These Kits are Model and Production Date dependent - select accordingly.

This Kit includes the following:

• Set of 4 Upgraded IGNITION PROJECTS Ignition Coils
• Set of 4 OEM Spark Plugs

IGNITION PROJECTS COILS

The IP Coils are the ignition coil with a high power amplifier built in to it. The IP Coils produce 4 times more spark energy than stock coils and also generate an ultra fast multi spark discharge of 10 sparks up to highest RPM. The spark amperage is increased 100%, allowing the spark to reach many more molecules and therefore accelerate the ignition and combustion process. This is extremely important in forced induction applications but also improves the performance of normally aspirated engines.

The IP Coils increases horsepower and torque throughout the entire rpm range while reducing fuel consumption. The IP Coil is OBD II compliant.

Installation is easy. Direct bolt-in to the engine, no splicing or cutting into stock wiring, simply replace the stock coils with our Plasma Direct Coils and ready to go!

IGNITION PROJECTS was established in the Southern California in 2011, with the vision of developing new and innovative products to enhance vehicle ignition systems. Our mission is to develop stronger ignition systems in order to optimize engine performance, lower emission ratings and improve fuel consumption. We develop and manufacture our products in our R&D facility located in the City of Tustin in the heart of Orange County, California. With new technological advances through our research and development process, IGNITION PROJECTS has become a leading Ignition Manufacturer in the global market and we are proud to have our products produced right here in the USA.

NOTE: Some States (like California) have ever tightening requirements for emissions testing and inspections. Always check your local regulations on compliance for street use.