× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items
AP Technical department recognised that GCC679 with a green paint identifying mark as their best for clamping pressure to date, apart from the 20% uprated version C-AEG485. For performance engines it works best by fitting C-AHT596 or C-AHT595 180mm Race plate.

See C-AHT594 for 190mm plate.

Better clamping pressure to stop clutch slip is obtained by using our flywheel C-AEG422 or C-AEG425.

Clutch kits should be re-balanced to the flywheel assembly as originally done on production. This is because the verto pressure was a heavier item and the main mass rather than the flywheel as on earlier diaphragm models. This was recognized as a small design fault but easily overcome by balancing which is why Rover originally supplied complete balanced Verto assemblies as replacement parts.Therefore this part should be balanced,preferably with flywheel.
Classic Austin Mini Verto Type Clutch Diaphragm Pressure Plate

Classic Austin Mini Verto Type Clutch Diaphragm Pressure Plate

Classic Austin Mini Verto Type Clutch Diaphragm Pressure Plate
Part No: GCC679
$152.95
Qty:
Fits the following:
Classic Mini
Alternate Products
Classic Austin Mini Verto Clutch Pressure Plate Performance
$152.95 Classic Austin Mini Verto Clutch Pressure Plate Performance
AP Technical department recognised that GCC679 with a green paint identifying mark as their best for clamping pressure to date, apart from the 20% uprated version C-AEG485. For performance engines it works best by fitting C-AHT596 or C-AHT595 180mm Race plate.

See C-AHT594 for 190mm plate.

Better clamping pressure to stop clutch slip is obtained by using our flywheel C-AEG422 or C-AEG425.

Clutch kits should be re-balanced to the flywheel assembly as originally done on production. This is because the verto pressure was a heavier item and the main mass rather than the flywheel as on earlier diaphragm models. This was recognized as a small design fault but easily overcome by balancing which is why Rover originally supplied complete balanced Verto assemblies as replacement parts.Therefore this part should be balanced,preferably with flywheel.
Recommended items for: GCC679
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Related Technical Articles:
Classic Mini Cooper Flywheels & Clutch page 40
Created: December 21, 2018
View the selection of Flywheels & Clutches for the Classic Mini Cooper from the Mania Catalog as a PDF. Find a Part No. in the catalog. Type or copy/paste it into the search box to find it on the website.
Classic Mini Flywheel and Clutch Identification
Created: March 08, 2009
Austin Mini flywheel and clutch identification is explained and illustrated with color photos of early vs. later designs.
Mini Cooper Verto Clutch Information
Created: August 06, 2008
This article has been written owing to the increasing amount of people who call Mini Spares stating that their 1275cc Injection type Mini will not start after fitting a new clutch, especially when they have purchased the parts from another supplier rather than a Mini specialist.