800-946-2642
Shop by Car
Chapter Quick Navigation: 
Mini Flares, Spoilers, etc - Chapter 13 Pages 16-17
MINI Catalog Page 13-17
Records - of

#

Part No

Qty

Description

MS131  
EURO ARCH IN FIBERGLASS - This arch sticks out approximately 2.750" and enables bodyline (wheel arch & moulding lip) to be cut or modified to allow fitment of large wheels, ie:13" and is attached by screws from back of wing, (hence no visible screws). Fiberglass arch extends beyond bumper seam line at rear.
MS128  
GROUP 5 ARCH IN FIBERGLASS - This arch kit sticks out 3" and is used when body line is cut away or retained. Originally as a group 5 arch it was made for cars with no modifications but has become a cheap “jack of all trades”especially when large odd size wheels are used. Rear arches stop at bumper seam line. Widest part at front approximately 5".
MS132  
MINI SPECIAL ARCH 1" WIDER IN FIBERGLASS - This arch kit sticks out 2.750" when bodylines (wheel arch & moulding lip) are as original. The arch is similar to the plastic type fitted by Rover but is 1” wider. Fiberglass arch extends beyond bumper seam line. (not illustrated)
C-AJJ3316  
GROUP 2 IN FIBERGLASS - This arch kit sticks out 1.75", including lip, when bodylines (wheel arch and moulding lip) are kept original. Screws are visible and the chrome wheel arch moulding can be retained. These are copies of original ST Abingdon works arches. Rear arches stop at bumper seam line.
C206  
ALLOY ARCHES - This arch kit sticks out 1.75", including lip, when body lines (wheel arch & moulding lip) are kept original. Screws are visible as per securing lip and plastic wheel arch moulding can be retained. Rear arch slope at bumper seam line. Often used by Vintage/Historic racers overseas or foundation to blend and build on fiberglass arches.
C-STN71  
WORKS GROUP 5 ARCH IN FIBERGLASS - This arch kit sticks out 2.5", including lip, when bodylines (wheel arch & moulding lip) are kept original. Screws are visible and plastic wheel arch moulding can be retained. Rear arch stops at bumper seam line. These are original ST works car copies.
MS133  
WP ARCH IN FIBERGLASS - This arch kit sticks out 2.25" maximum when bodyline(wheel arch & moulding lip) are kept original. Screws are not visible. Front arches taper away at front exposing tire tread. Rear arches stop at bumper seam line. Has correct body to arch rubber seal included.
GAW117  
PLASTIC ARCH known as MINI SPECIAL ARCHES - (includes moulding between arches) This arch kit sticks out 1.750" when bodyline (wheel arch & moulding seam) are kept original. Originally fitted to Innocenti Minis become standard equipment on all Minis from 1984. Arches available separately. Screws are visible and rear arch extends beyond bumper seam line. (not shown)
Entries Per Page
Page of