× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items

The last distributor you will ever need is now available for your Mini or Mini Cooper S. The ‘123 Distributor’ designed by www.tdcperformance.ca is a revolutionary design that allows you to have the exact ignition curve that you need for your application, whether you have an 850 or a full blown 1275cc engine. The all new fully electronic billet distributor has been programmed with 16 different advance curves that are easily switched. The 123 Distributor is available for either the A or A+ application, with or without vacuum advance. The 16 different advance curves are based on the original factory Lucas distributors as used in the many different models; as long as you always use either an A or A+ power-unit, the 123 Distributor is the one and only distributor you will ever need. The 123 Distributor is fully electronic and thus not only does it have electronic (non-mechanical) points but it also has an electronic microprocessor controlled advance curve – 16 of them in fact. Most mechanical distributors will show a deterioration of the advance curve after only a few years. The 123’s electronic design results in both a fantastic selection of curves and a curve that is not subject to the wearing of mechanical components. The 123 Distributor is a direct replacement for any Lucas distributor.

Negative ground only. For A+ engines only with vacuum advance.

Download Installation Instructions in PDF format (152 Kbytes).

Watch a YouTube video showing the stability of the output of the 123 distributor compared to a Lucas dizzy with points and Pertronix.

Austin Mini 123 Distributor A+ W/ Vacuum Advance

Austin Mini 123 Distributor A+ W/ Vacuum Advance

Austin Mini 123 Distributor A+ W/ Vacuum Advance

Austin Mini 123 Distributor A+ W/ Vacuum Advance

Austin Mini 123 Distributor A+ W/ Vacuum Advance

Austin Mini 123 Distributor A+ W/ Vacuum Advance

Austin Mini 123 Distributor A+ W/ Vacuum Advance
Selected: 123 Distributor For A+ Engines W/Vac Advance
Part No: 123DIST-APLUSV
$602.95
Qty:
Specially Priced. Discounts Do Not Apply.
Fits the following:
Classic Mini
PayPal Pay Later

The wireless programmable 123\TUNE+-4-R-V-MINI-A+ is designed for the Mini A-plus engines.

123ignition is proud to announce the first fully programmable wireless Bluetooth 4.0 ignition! Control your 123\TUNE+ with your iOS/Android smartphone or tablet. The App makes it possible to adjust the ignition curve and shows an electronic dashboard.

Main features: REV-counter, Antitheft system by a PIN code, Bluetooth 4.0, Real time tuning, Vacuum advance, Boost retard, Soft REV-limiter, etc.

SPECIFICATIONS
cylinders: 4
direction: CW/CCW
voltage: 4,0-15,0 Volts
range: 500 - 8000 rpm
temperature: -30 to 100 Celsius
coil: stock or High Energy coil, primary coil NOT below 1,0 ohm
dwell: constant current, fully autom.
time-out: after 1 second current is switched off
spark-bal.: better than 0,5 degr. crankshaft
vacuum: vacuum advance or boost retard, max. 20 degrees crankshaft
max.advance: 45 degr. crankshaft
curves: one programmable advance curves
Programmable: By iOS or Android app via Bluetooth 4.0
Rev limiter: Programmable soft rev limiter ( max 7900 rpm ), 60% of the sparks will cut off
wiring: red = +6V or +12V, black = '-' coil, blue = ground
App for IOS: 123\Tune  version 1.5.2 (link to App Store opens in new window) requires iPhone/IPad/iPod 4+ and upp
App for Android: 123\Tune+  version 1.5.0 (link to Google Play Store opens in new window) requires Android 4.4 and up and a device with bluetooth 4

The 123\TUNE+-4-R-V-G replaces most 4 cyl. Lucas-distributors for engines in Great-British (hence 'GB') cars.

Please check if the distributor need a connection for a mechanical rev.counter, as a 123\TUNE+-4-R-V-G does not offer this.

123ignition is proud to announce the first fully programmable wireless Bluetooth 4.0 ignition! Control your 123\TUNE+ with your iOS/Android smartphone or tablet. The App makes it possible to adjust the ignition curve and shows an electronic dashboard.

For Pre-A+ Series Engines.

 
Main features: REV-counter, Antitheft system by a PIN code, Bluetooth 4.0, Real time tuning, Vacuum advance, Boost retard, Soft REV-limiter, etc.

SPECIFICATIONS
cylinders: 4
direction: CW/CCW
voltage: 4,0-15,0 Volts
range: 500 - 8000 rpm
temperature: -30 to 100 Celsius
coil: stock or High Energy coil, primary coil NOT below 1,0 ohm
dwell: constant current, fully autom.
time-out: after 1 second current is switched off
spark-bal.: better than 0,5 degr. crankshaft
vacuum: vacuum advance or boost retard, max. 20 degrees crankshaft
max.advance: 45 degr. crankshaft
curves: one programmable advance curves
Programmable: By iOS or Android app via Bluetooth 4.0
Rev limiter: Programmable soft rev limiter ( max 7900 rpm ), 60% of the sparks will cut off
wiring: red = +6V or +12V, black = '-' coil, blue = ground
App for IOS: 123\Tune  version 1.5.2 (link to App Store opens in new window) requires iPhone/IPad/iPod 4+ and upp
App for Android: 123\Tune+  version 1.5.0 (link to Google Play Store opens in new window) requires Android 4.4 and up and a device with bluetooth 4

The last distributor you will ever need for your car is now available for your Mini or Mini Cooper S. The 123 Distributor designed by www.tdcperformance.ca is a revolutionary design that allows you to have the exact ignition curve that you need for your application, whether you have an 850 or a full blown 1275cc engine. The all new fully electronic billet distributor has been programmed with 16 different advance curves that are easily switched. The 123 Distributor is available for either the A or A+ application, with or without vacuum advance. The 16 different advance curves are based on the original factory Lucas distributors as used in the many different models; as long as you always use either an A or A+ power-unit, the 123 Distributor is the one and only distributor you will ever need. The 123 Distributor is fully electronic and thus not only does it have electronic (non-mechanical) points but it also has an electronic microprocessor controlled advance curve – 16 of them in fact. Most mechanical distributors will show a deterioration of the advance curve after only a few years. The 123’s electronic design results in both a fantastic selection of curves and a curve that is not subject to the wearing of mechanical components. The 123 Distributor is a direct replacement for any Lucas distributor.

Negative ground only - No vacuum advance.

Download Installation Instructions in PDF format (152 Kbytes).

Watch a YouTube video showing the stability of the output of the 123 distributor compared to a Lucas dizzy with points and Pertronix.

Special A+ type electronic distributor from 123 Ignitions that can be programmed via a USB port directly to your laptop computer. If you want to tune your engine, or you have an engine for which there is no standard distributor available.....the new 123\TUNE is the answer ! By connecting it to a computer, the end-user can easily adapt the 123\TUNE to fulfill even the most demanding requirements. The unit offers two sets of curves that can be selected by placing 12 Volt on a wire from the 123\TUNE.  Handy, if you're driving on two different fuels, like regular fuel with LPG or with Ethanol. Distributor has vacuum advance unit.

This distributor will fit A+ Minis and inline 1275cc A+ Morris Marina Ital engines. Free tuning software is available at:

http://www.123ignition.nl/product.phtml?id=238

(Scroll to the bottom of the Distributor description - The 123\TUNE runs on Windows 10, Windows 8, Windows 7, Windows Vista & Windows XP (Service Pack 2).

Note: USB cable not included.

 

 

123ignition is proud to announce the first fully programmable wireless Bluetooth 4.0 ignition! Control your 123\TUNE+ with your iOS/Android smartphone or tablet. The App makes it possible to adjust the ignition curve and shows an electronic dashboard.

Main features: REV-counter, Antitheft system by a PIN code, Bluetooth 4.0, Real time tuning, Vacuum advance, Boost retard, Soft REV-limiter, etc.

For Pre-A+ type A Series engines.

SPECIFICATIONS
cylinders: 4
direction: CW/CCW
voltage: 4,0-15,0 Volts
range: 500 - 8000 rpm
temperature: -30 to 100 Celsius
coil: stock or High Energy coil, primary coil NOT below 1,0 ohm
dwell: constant current, fully autom.
time-out: after 1 second current is switched off
spark-bal.: better than 0,5 degr. crankshaft
vacuum: vacuum advance or boost retard, max. 20 degrees crankshaft
max.advance: 45 degr. crankshaft
curves: one programmable advance curves
Programmable: By iOS or Android app via Bluetooth 4.0
Rev limiter: Programmable soft rev limiter ( max 7900 rpm ), 60% of the sparks will cut off
wiring: red = +6V or +12V, black = '-' coil, blue = ground
App for IOS: 123\Tune  version 1.5.2 (link to App Store opens in new window) requires iPhone/IPad/iPod 4+ and upp
App for Android: 123\Tune+  version 1.5.0 (link to Google Play Store opens in new window) requires Android 4.4 and up and a device with bluetooth 4

The last distributor you will ever need is now available for Minis, Sprites, Midgets, and Morris Minors. The 123 Distributor designed by www.tdcperformance.ca is a revolutionary design that allows you to have the exact ignition curve that you need for your application, whether you have an 850 or a full blown 1275cc engine. The all new fully electronic billet 123 distributor has been programmed with 16 different advance curves that are easily switched. The 123 Distributor is available for either the A or A+ application, with or without vacuum advance. The 16 different advance curves are based on the original factory Lucas distributors as used in the many different models; as long as you always use either an A or A+ power-unit, the 123 Distributor is the one and only distributor you will ever need. The 123 Distributor is fully electronic and thus not only does it have electronic (non-mechanical) points but it also has an electronic microprocessor controlled advance curve – 16 of them in fact. Most mechanical distributors will show a deterioration of the advance curve after only a few years. The 123’s electronic design results in both a fantastic selection of curves and a curve that is not subject to the wearing of mechanical components. The 123 Distributor is a direct replacement for any Lucas distributor.

Negative ground only - for Pre-A+ engines (distributors held to block with two (2) bolts). No vacuum advance.

Download Installation Instructions in PDF format (152 Kbytes).

Watch a YouTube video showing the stability of the output of the 123 distributor compared to a Lucas dizzy with points and Pertronix.

Special Pre-A+ type electronic distributor from 123 Ignitions that can be programmed via a USB port directly to your laptop computer. If you want to tune your engine, or you have an engine for which there is no standard distributor available.....the new 123\TUNE is the answer ! By connecting it to a computer, the end-user can easily adapt the 123\TUNE to fulfill even the most demanding requirements. The unit offers two sets of curves that can be selected by placing 12 Volt on a wire from the 123\TUNE.  Handy, if you're driving on two different fuels, like regular fuel with LPG or with Ethanol. Distributor has vacuum advance unit.

This distributor will fit Pre-A+ Minis and all Sprite, Midget, and Morris Minors. Free tuning software is available at:

http://www.123ignition.nl/product.phtml?id=238

(Scroll to the bottom of the Distributor description - The 123\TUNE runs on Windows 10, Windows 8, Windows 7, Windows Vista & Windows XP (Service Pack 2).

Note: USB cable not included.

 

 

The last distributor you will ever need is now available for your Mini, Sprite & Midget, and Morris Minor. The ‘123 Distributor’ designed by www.tdcperformance.ca is a revolutionary design that allows you to have the exact ignition curve that you need for your application, whether you have an 850 or a full blown 1275cc engine. The all new fully electronic billet distributor has been programmed with 16 different advance curves that are easily switched. The 123 Distributor is available for either the A or A+ application, with or without vacuum advance. The 16 different advance curves are based on the original factory Lucas distributors as used in the many different models; as long as you always use either an A or A+ power-unit, the 123 Distributor is the one and only distributor you will ever need. The 123 Distributor is fully electronic and thus not only does it have electronic (non-mechanical) points but it also has an electronic microprocessor controlled advance curve – 16 of them in fact. Most mechanical distributors will show a deterioration of the advance curve after only a few years. The 123’s electronic design results in both a fantastic selection of curves and a curve that is not subject to the wearing of mechanical components. The 123 Distributor is a direct replacement for any Lucas distributor.

Negative ground only. For pre-A+ engines with vacuum advance.

Download Installation Instructions in PDF format (152 Kbytes).

Watch a YouTube video showing the stability of the output of the 123 distributor compared to a Lucas dizzy with points and Pertronix.

The last distributor you will ever need is now available for your Mini or Mini Cooper S. The ‘123 Distributor’ designed by www.tdcperformance.ca is a revolutionary design that allows you to have the exact ignition curve that you need for your application, whether you have an 850 or a full blown 1275cc engine. The all new fully electronic billet distributor has been programmed with 16 different advance curves that are easily switched. The 123 Distributor is available for either the A or A+ application, with or without vacuum advance. The 16 different advance curves are based on the original factory Lucas distributors as used in the many different models; as long as you always use either an A or A+ power-unit, the 123 Distributor is the one and only distributor you will ever need. The 123 Distributor is fully electronic and thus not only does it have electronic (non-mechanical) points but it also has an electronic microprocessor controlled advance curve – 16 of them in fact. Most mechanical distributors will show a deterioration of the advance curve after only a few years. The 123’s electronic design results in both a fantastic selection of curves and a curve that is not subject to the wearing of mechanical components. The 123 Distributor is a direct replacement for any Lucas distributor.

Negative ground only. For A+ engines only with vacuum advance.

Download Installation Instructions in PDF format (152 Kbytes).

Watch a YouTube video showing the stability of the output of the 123 distributor compared to a Lucas dizzy with points and Pertronix.

Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Related Technical Articles:
123 Distributors for the Mini Cooper
Created: January 31, 2006
The last distributor you will ever need is now available for your Mini or Mini Cooper S. The '123 Distributor' from the Netherlands is a revolutionary design that allows you to have the exact ignition curve that you need for your application. And most importantly this is true if you have an 850 or a full blown 1275cc engine.
123 Ignition Mounting Instructions
Created: January 31, 2006
Mounting instructions for the '123ignition' type : 123\MINI-R-V & 123\MINI-R-V-A+ for : all 6 & 12 Volt cars, negative earth only ! IMPORTANT Please read the entire instructions before you begin installation. If after reading you are unsure of the procedure to be followed, please ask som...
Initial ignition Timing Set-Up and Distributor Guide
Created: September 25, 2000
Any deviation away from the original standard engine specification, or where a dizzy from another source is used in the engine you have, the ignition timing will generally be different from that set by the manufacturer.