Recently Viewed Items
Your Price $44.95
While it's the perfect coil to go with the Pertronix Ignitor breakerless ignition, the new 40,000 volt Flame-Thrower can benefit virtually any distributor type induction system. For one thing, the higher voltage allows larger spark plug gaps for added power, smoother response and better fuel economy.
3.0 ohm for unballasted systems.
Choose from chrome (40501)or OEM black (40511), they're oil filled for better cooling and voltage insulation; or get the epoxy version (40611) of the Flame-Thrower when extreme vibration is a factor. This will fit any Mini , Sprtie , and Midget.
Pertronix Ignition Application Questions
Additional Related Articles:
The Ignitor electronic ignition is far from being universal. Each kit is designed specifically for the distributor type. However, our kits will often fit many distributors from the same manufacturer. A kit that has been designed for a particular distributor type may also fit other distributors that use the same point set, cap and rotor. For additional information .
Ignitor kits are available for the Automotive, Industrial, Marine and Agricultural industries. Automotive applications range from American Motors to Volvo’s covering most domestic and foreign vehicles. Our Marine applications include many popular and classic boats. Many kits are available for all types of Industrial and Agricultural equipment. Ignitor kits for 6 volt and 12 volt positive ground applications are also available. Call for a detailed listing of applications.
If you can’t find your application in our Application Guide, it does mean that a kit is not available. We have many kits that have been developed for distributors and applications not listed in the Application guide. You may call our main office at 800-827-3758 for additional help. Before you call have the following information ready:
The more information you have about your vehicle or equipment the better.
The Ignitor fits entirely inside the distributor, and in most cases installs quicker than points. There are no “black boxes” or complicated wiring. Simply install the kit into the distributor attack the two wires to the appropriate positions, and you’re done. Some applications may require the distributor to be shimmed, which may add to the level of difficulty.
Yes. As a matter of fact, in the last five years we’ve added approximately 30-40 new kits to our application listings. We are constantly working on developing new kits to provide coverage in many areas. For more specific information regarding our custom installations call the Pertronix main office at 800-827-3758. The more information you have about your vehicle or equipment the better.
Our Flame-Thrower coils are designed specifically for compatibility with our Ignitor™. However, it may also be used with a point type system or any other system that calls for a 1.5 or 3.0-ohm coil.
Flame-Thrower spark plug wires are the perfect companions to our other performance products. Many applications are covered, but they are broken into two basic types. For those interested in stock appearance, our 7.0 mm "STOCK-LOOK"™ all black (no script) wires are available. Not concerned about looking stock? Our 8.0 mm "MAGx2"™ colored wires with Flame-Thrower™ white letter script, do the trick.Back to Top
Customer Reviews of:
4 out of 5 stars
Share your thoughts with other customers
Most Helpful Customer Reviews
Tough and smoother
I have the Petronix ignitor and was running the Lucas Gold coil with it, but after talking to some people they had better results with this coil. I can say it does idle smoother, but of course can't tell the difference in the higher revs.