This Fiberglass Mini Pickup body shell is sectioned and the pickup components are added at point of manufacture making the finished product a one piece shell. This kit is supplied with doors, bonnet, tailgate upper & lower dash rails and have the option of inner wings. These body shells are supplied with a steel skeleton bonded into the bodyshell to incorporate the following - Top shocker mounts internal plate with Pre drilled and taped threads Top subframe mount integral with internal frame work Lower subframe mounts (in front valance and in floor by feet) Steering rack mounting plate Handbrake mounting plate Shoulder and floor seatbelt mounts Central tunnel seat belt mounts Rear subframe front mounts (onto side impact sill runner from front to back) Rear subframe rear mounts onto integral frame Also has sunvisor and mirror mounts into steel section over the screen. As the shells are built we can alter the position of the bulkhead allowing for up to 100mm increase in cab space. please discuss your requirements at time of order. The doors are curved both front and back as per the MK1 but have the later one piece glass wind down window and internal hinges. These doors also have the later "anti-burst" door lock units and also use the standard window winder mechanism. Each shell is built to order, as such a six week waiting list applies. As this is a totally new concept, and we will only make one as required, we have no images, so at present we only have a few images of the standard Mini Pickup Bodyshell supplied during development showing the body shell in the mould, and the internal steel work during bonding. Made in the UK!
This is a special order item, allow 4-6 weeks for delivery.