× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items
Lightweight adjustable billet steel duplex timing gear and chain set.

If you are working on your engine and you want to do it right then you should consider how you are going to drive the camshaft. People often spend a lot of time picking the camshaft and then ignore the exact reason they spent so much time picking the cam. Driving the cam and controlling the timing relationships between the cam and the crank is what camshaft drive systems are all about. It makes no difference what the cam does if it does not do it in sync with the crank and pistons. The stock system on many 848, 948, 998 and 1098cc engines is a single chain drive between the crank and cam. The 'S' and some 1275 have a much better "duplex" chain. But even those do wear out! The best judge is to check it while you are taking it apart. With the timing cover off the engine rotate the crank a slight amount back and forth. The camshaft must move the exact distance at the same instance!
The least expensive but better than an old one is a stock cast gear and chain set, This budget standard cast duplex gear and chain set is the next step up, for road use only.
Fitment of an uprated cam drive system is essential when building a performance engine. Timing scatter induced by the standard set up can reach up to 15 degrees once the single row chain has stretched, which it does after only a few miles. This scatter not only affects the cam timing, but also the ignition, the distributor being driven by the camshaft. Power loss suffered by this phenomenon is substantial. Replacing the standard single row (simplex) system with a dual row (duplex) system greatly reduces the problem; use of a toothed belt system all but eliminates it. The belt system vastly reduces valve train noise and also helps damp out some of the odd harmonics generated by the 3 main bearing 'A' series engine. It is also extremely important to time any cam in to its required setting to obtain maximum performance, especially with performance cams. The 'dot to dot' method can, because of manufacturing tolerances, be out by as much as 15 degrees. Anything above 2 degrees out and power suffers -- most noticeably in small bore engines. In race engines you probably lose 1 hp for every degree the cam is out, more when over 6 degrees! Fits a Sprite , MG Midget , Mini , and Morris Minor.

CONTENTS:-

PART NUMBER          DESCRIPTION                                   QUANTITY

C-AEG578                   Camshaft sprocket, lightened         1
AEA695                      Crankshaft sprocket                              1
2H4905                      Timing chain                                            1
AEA687                      Screw - countersunk                             2

The front plate will have to be countersunk as shown ‘X’ to take the screws AEA687, which replace the existing hexagon-headed screws, which would foul on the timing chain. Check for clearance on chain all round and align gears as per Workshop Manual.

When using ‘A’ plus timing covers there is a small round pressing at the bottom which needs making flat to allow timing chain clearance.

Ensure that the crankshaft oil thrower 12A1148 is correctly fitted with the letter F. Facing you or on very early engines the lip faces outwards.

Classic Austin Mini duplex chain gear kit cam drive lightweight

Classic Austin Mini duplex chain gear kit cam drive lightweight

Classic Austin Mini duplex chain gear kit cam drive lightweight
Part No: C-AJJ3325
$129.95
Qty:
Fits the following:
Classic Mini
Sprite & MG Midget
Morris Minor
PayPal Pay Later
Alternate Products
Classic Austin Mini duplex timing chain and gearset kit
$69.95 Classic Austin Mini duplex timing chain and gearset kit
Classic Mini Vernier adjustable duplex timing gear set
$192.95 Classic Mini Vernier adjustable duplex timing gear set
Lightweight adjustable billet steel duplex timing gear and chain set.

If you are working on your engine and you want to do it right then you should consider how you are going to drive the camshaft. People often spend a lot of time picking the camshaft and then ignore the exact reason they spent so much time picking the cam. Driving the cam and controlling the timing relationships between the cam and the crank is what camshaft drive systems are all about. It makes no difference what the cam does if it does not do it in sync with the crank and pistons. The stock system on many 848, 948, 998 and 1098cc engines is a single chain drive between the crank and cam. The 'S' and some 1275 have a much better "duplex" chain. But even those do wear out! The best judge is to check it while you are taking it apart. With the timing cover off the engine rotate the crank a slight amount back and forth. The camshaft must move the exact distance at the same instance!
The least expensive but better than an old one is a stock cast gear and chain set, This budget standard cast duplex gear and chain set is the next step up, for road use only.
Fitment of an uprated cam drive system is essential when building a performance engine. Timing scatter induced by the standard set up can reach up to 15 degrees once the single row chain has stretched, which it does after only a few miles. This scatter not only affects the cam timing, but also the ignition, the distributor being driven by the camshaft. Power loss suffered by this phenomenon is substantial. Replacing the standard single row (simplex) system with a dual row (duplex) system greatly reduces the problem; use of a toothed belt system all but eliminates it. The belt system vastly reduces valve train noise and also helps damp out some of the odd harmonics generated by the 3 main bearing 'A' series engine. It is also extremely important to time any cam in to its required setting to obtain maximum performance, especially with performance cams. The 'dot to dot' method can, because of manufacturing tolerances, be out by as much as 15 degrees. Anything above 2 degrees out and power suffers -- most noticeably in small bore engines. In race engines you probably lose 1 hp for every degree the cam is out, more when over 6 degrees! Fits a Sprite , MG Midget , Mini , and Morris Minor.

CONTENTS:-

PART NUMBER          DESCRIPTION                                   QUANTITY

C-AEG578                   Camshaft sprocket, lightened         1
AEA695                      Crankshaft sprocket                              1
2H4905                      Timing chain                                            1
AEA687                      Screw - countersunk                             2

The front plate will have to be countersunk as shown ‘X’ to take the screws AEA687, which replace the existing hexagon-headed screws, which would foul on the timing chain. Check for clearance on chain all round and align gears as per Workshop Manual.

When using ‘A’ plus timing covers there is a small round pressing at the bottom which needs making flat to allow timing chain clearance.

Ensure that the crankshaft oil thrower 12A1148 is correctly fitted with the letter F. Facing you or on very early engines the lip faces outwards.

 
 
Question:
IS THIS A DOUBLE ROLLER CHAIN?
Answer:
Yes it is.

Spridget Mania Tech Team

The Spridget Parts and Accessories Experts

 
 
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Related Technical Articles:
Classic Mini Cooper Camshaft drive kits page 39
Created: January 10, 2019
Camshaft to engine timing drive kits, single row chain, double row chains and belt drive kits are all options for the Classic Mini Cooper. Upgrade and high performance duplex chain kits with adjustable timing gears are also an option.
Removing Slack In A-Series Engine Timing Chains
Created: March 01, 2018
Watch Our Video - If you've got too much slack in your A-Series engine timing chain, Mini Mania now has Rollmaster timing gear sets in stock to take up that slack! These oversized gear sets come in three offset options.
How-To Set Valve Timing on a Classic Mini 1275cc A+ Block Part 2
Created: August 15, 2016
VIDEO: How-To Set the Valve Timing on a Classic Mini 1275cc A+ Block Part 2
How-To Set Valve Timing on a Classic Mini 1275cc A+ Block Part 1
Created: August 15, 2016
VIDEO: How-To Set the Valve Timing on a Classic Mini 1275cc A+ Block Part 1
Did You Know? December 3, 2015
Created: November 25, 2015
Did you know how important it is to get your cam timing correct?
Classic Mini Cooper CAM TIMING - with video
Created: February 04, 2011
Understanding how to set your camshaft timing is a fundamental necessity when working on your Classic Mini Cooper. Learn from the experts at Mini Mania the basic and beyond.