× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items
Oil seal for the differential side cover on all Minis; except for early Automatics and Cooper S with Hardy Spicer. Fits yoke type and pot type. 1.250 x 1.875 x 0.297/0.375.

These are NOT included in the gearbox gasket set (GEG804), so must be purchased seperately.

Classic Mini Differential Side Cover Seal For Yoke & Pot Joint/Rod Change

Classic Mini Differential Side Cover Seal For Yoke & Pot Joint/Rod Change

Classic Mini Differential Side Cover Seal For Yoke & Pot Joint/Rod Change
Part No: ADU5738
$1.75
Qty:
Fits the following:
Classic Mini
PayPal Pay Later
Oil seal for the differential side cover on all Minis; except for early Automatics and Cooper S with Hardy Spicer. Fits yoke type and pot type. 1.250 x 1.875 x 0.297/0.375.

These are NOT included in the gearbox gasket set (GEG804), so must be purchased seperately.

 
 
Question:
For a Classic Mini spi 1996, I haven't been able to find inner tie rod ends for the steering components. Is there any or does it mean I must replace the whole steering rack? How can, I determine which cv joint transmission seal is the one for my Mini? Its a 1996 spi lhd manual trans?
Answer:
Yes, generally the racks are just replaced since the inner joints are not available, and frankly, getting them apart is a Herculean task.

This should be the one: https://www.minimania.com/part/ADU5738/Classic-Austin-Mini-Cooper-Differential-Side-Cover-Seal-yoke--Pot-rod-Change

Mini Mania Tech Team

The Classic Mini Parts and Accessories Experts

 
 
Recommended items for: ADU5738
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Related Technical Articles:
Classic Mini Cooper Differential Parts & Starters.Generators - 45
Created: December 28, 2018
Complete selection of differential final drive ratios plus all the couplings for all 1959 thru 2000 models. Starter, starter solenoids, Alternators and Generators also available for the same models. Technical information is available on line or on the phone.
Classic Mini Limited Slip Diffs; parts for installation
Created: October 16, 2000
Fitting an LSD isn't as simple as replacing the diff cage unit. In all cases a certain degree of diff housing modifications is needed - material needing to be ground/filed away to provide clearance for larger diff housing cases and crown wheel bolts. Although it has to be said the Quaife diff is supposed to fit without these mods. I've never found that.