Not Logged In
Recently Viewed Items
Mini Flywheel and Clutch Identification
Additional Related Articles:
The pressure plate on the left is called a 'spring' type as typically found on early 850cc engines. The one on the right is called a 'diaphragm' type. While the pressure plates are NOT interchangeable on the flywheel itself. Either flywheel can be use on any engine assuming to keep it the the correct pressure plate. The back plates and the clutch disc itself are interchangeable.
Pre-Verto versus Verto Clutch
In 1980, the Mini’s clutch underwent a major change. The internal clutch/ flywheel assembly changed as well as almost all of the external, connecting bits as far back as the master cylinder. They are pretty easy to tell apart with just a quick look inside the engine compartment. Here are two ways. There are others.
Clutch slave cylinder mounting. The pre-Verto clutch slave is mounted horizontally directly onto the flywheel housing about level with the top of the long clutch arm. With the Verto, the clutch slave cylinder is mounted on a bracket which is mounted on the flywheel housing allowing the clutch slave to point downwards at an angle to meet up with the clutch arm rod coming off the end of the very short clutch arm. The slave cylinders are visibly different, too.