Im looking for a pair of Works headlight covers,mk1 sump guard, lucas reverse lamp, lucas driving lamp covers and some cool vintage racing decals/ stickers (Turning my Cooper into a Works replica.. not very strict at least at first glance i want it to look like one). For sale or free let me know.

I also have two mk3 bumpers, working mk1 generator that I dont need. Just pay for shipping I'll let them go for free.

 

 

I sold mine with the dual carburetors to someone from Irvine. He said its not the correct airbox for his car. He might sell it.

Engine has been sold....

The later Mini ones were 8.4 inch but require 12" or bigger wheels. The 7's are pretty much useless and have about the same braking efficiency as the drums, on the plus side you don't need to adjust them.

I would really love some disk brakes for my 1980. did any of the disks change over the years? i know there was 7 and 7.5s brakes.

i desire to have a transparent distributor cap for 59D4 , its cool to see the distributor system in action while the engine is on.  please let me know where i can buy one. 

someone told me to just soak the regular black distributor cap in vinegar overnight and it will become transluscent. 

 

 

but not moving

 

 

Here's one perhaps you folks across the pond can help with. Looking for a pair of amber turn signal lenses for the rear of an mk1 traveller. The company I work for is putting together a pretty mean v-tec woody and nearly everything on it is new or custom fabricated, but there are those few pieces we can't else from a supplier! 

I'd like to locate a set of early 4.5x10 Cosmic alloys with Cooper S off-set at an affordible price point. I do have a very nice complete six peice set of the early stainless fender trim that can be offered in trade.

John

 

 

E-mails sent - thanks guys!

I'm at the beginning of my collecting phase! Currently restoring a 66 mk2 Elf, just about to get some color on the body

My wishlist would be: SPI/MPI tank (I want to go fuel injection) SPI or MPI manifold and throttle body setup Possibly fuel lines for an injected mini? Failing that: A good HIF38 for the little 998 lump I have

Would love to build up enough to trade, I'm working on it!!

Daniel

i have a universal flywheel puller that i can loan to trustworthy people..need it back complete when you're done.. just pay for shopping to and from.

Thanks Alex

I'm on my phone, I'll save the link on my laptop later.

what's your email? and location

I have an A+ engine 1275 that runs great which I recently pulled from my car and originally was from a 1991 mini.  Not sure of the mileage but it is completely built with tranny, new clutch, water pump, slave cylinder.  Pretty much a drop in engine and just add electrics, cooling, and exhaust.  Im looking to let it go for $500. 

Hi

looking for third/forth gear synhronizer and 4/3 gear housing,A+ engine, any one have that in pile back of workbench.

Pred

Mk2 & 4 lamp units are interchangeable on the car as the bolt holes are in the same place.
The bodies, lenses and gaskets aren't.

the chrome is chipping and lens has seen better days  i think it's  3  1/2 inches wide

I've never seen clear lenses for a Mk2/3 rear light, only the Mk4s-on with the reversing lamp built in.

Chuck me an email as I've got a box full of the later lamp units and clear lenses.

Did 850s have a tube ?
I thought the dipstick went straight in the block like an A+ block.

Anybody have a Mk1 steel dipstick tube?  I'll trade for my plastic one or pay $$$.

BTW, I'm hoping I have something someone else needs so I can earn my keep on this thread.

Anyone need a steering wheel hub, fits Moto Lita or new Springalex for example?