For MINI (2000-on):  Select Your Car


Classic Mini Chassis/VIN Numbers and Commission Numbers - Part 2: 1980 – 2000

Compiled by Chuck Heleker and Ian Frearson (revised April 29, 2004)


The information used to compile the following was taken from factory service parts lists, factory microfiche, and factory CDs. Under close scrutiny, there appears to be some conflicts and mistakes in the factory number schemes, but, for the most part, the listings are accurate enough for car identification.

Please note that the Chassis (VIN) number and the Commission number are only one indication of the actual model and date of the car. The Chassis number plate is easily duplicated, especially on early cars, and it is not unusual for later cars not meeting US DOT and EPA standards to have earlier Chassis number plates attached to them to get them into the US illegally. Also, Chassis number plates have been known to be "faked" to turn a less-valuable car into a more valuable one; e.g., a standard Saloon into a Cooper or Cooper S.


Part 1: 1959 - 1980 :: click here

  • 1959 thru September 1969 – English Built
  • October 1969 to 1974 "Model Year" – English Built
  • 1974 "Model Year" to 1980 "Model Year" – English Built
  • 1980 "Model Year" – English Built

Part 2: 1980 - 2000

Click on link to jump to that section


Oct 1980 to Nov 1985 – English Built

VIN: Note that the VIN plate for these cars is likely marked, "Austin Rover Group LTD"

Also, it is possible that the dating in the factory microfiche is incorrect and the change date is November 1984, not November 1985. Major changes were made by October 1984 (for instance, 8.4" brakes and 12" wheels became standard).

The general format for the Chassis Number/VIN for these cars is:

  • SAX-X-K2S1N-###-A
  • SAX-X-K2S1N-###-A
  • SAX-X-K2S1N-XXX-A

VIN, First three positions ("SAX" in the above example):

  • This is the World Make Identifier. The factory microfiche indicates this was started on these cars in Feb 1981.
  • SAX = MG-Rover

VIN, Fourth position ("X" in the above example):

  • This is simply dismissed by the factory as "non-significant"!

VIN, Fifth position ("K" in the above example):

  • = Engine Type:
    • C = 1098cc
    • K = 848cc
    • L = 998cc

VIN, Sixth/Seventh position ("2S" in the above example):

  • = Body Type:
    • 2S = 2-door saloon/sedan (except 1275GT). Caution: bureaucratic bungles often interpret this as 25 (twenty-five)
    • 2W = Estate (“2-door Dual Purpose”)
    • G = P.O. Mail Van
    • U = Pick-up. Caution: "U" and "V" can be mistaken one for the other.
    • V = Panel van. Caution: "U" and "V" can be mistaken one for the other.

VIN, Eighth position ("1" in the above example):

  • = Series of model :
    • 1 = Round nose, traditional Mini body style.
    • 2 = Clubman, square nose style.

VIN, Ninth position ("N" in the above example):

  • = Specification:
    • N = HL, Special, HLE, or Mayfair
    • R = Mini 25
    • S = Mayfair (left-hand drive – France only)

VIN, Number position ("###" in the above example):

  • = The sequential build number:
    Build numbers are not listed. It is suspected that they carry on with the numbers from the previous series of cars; i.e., numbers were not started from 101, again.

VIN, Last position ("A" in the above example):

  • = Assembly plant. Officially, “Internal Use Only”
    • If used at all, this would be "A" for English-built cars
  • A = Longbridge


Nov 1985 to Circa 1990?? – English Built

VIN: Note that the VIN plate for these cars is likely marked, "Austin Rover Group LTD"

It is possible that the start date is really November 1984, not 1985 as stated in the factory microfiche.

The general format for the VIN for these cars is:

  • SAX-X-L2S1N20-###-A
  • SAX-X-L2S1N20-###-A
  • SAX-X-L2S1N20-XXX-A

VIN, First three positions ("SAX" in the above example):

  • This is the World Make Identifier. The factory microfiche indicates this was started on these cars in Feb 1981.
  • SAX = MG-Rover

VIN, Fourth position ("X" in the above example):

  • This is simply dismissed by the factory as "non-significant"!

VIN, Fifth position ("L" in the above example):

  • = Engine Type:
    • L = 998cc

VIN, Sixth/Seventh position ("2S" in the above example):

  • = Body Type:
    • 2S = 2-door saloon/sedan. Caution: bureaucratic bungles often interpret this as 25 (twenty-five)

VIN, Eighth position ("1" in the above example):

  • = Series of body :
    • 1 = Round nose, traditional Mini body style.

VIN, Ninth position ("N" in the above example):

  • = Class:
    • N = HLE, or Mayfair (right-hand drive)
    • O = E, City E
    • S = Mayfair (left-hand drive)

VIN, Tenth position ("2" in the above example):

  • = Model Year:
    • 2 = 1984-on (This conflicts with the microfiche indicating this position was used starting in November 1985)

VIN, Eleventh position ("0" in the above example):

  • = Steering:
    • 0 = Right-hand drive (RHD)
    • 1 = Left-hand drive (LHD)

VIN, Number positions ("###" in the above example):

  • = The sequential build number:
    Build numbers are not listed. It is suspected that they carry on with the numbers from the previous series of cars; i.e., numbers were not started from 101, again.

VIN, Last position ("A" in the above example):

  • = Assembly plant. Officially, “Internal Use Only”
    • If used at all, this would be "A" for English-built cars
  • A = Longbridge


1990 XN-----010001 -on (1300cc cars only) – English Built

The general format for the VIN for these cars is:

  • SAX-XN-N-A-Y-B-B-D-######
  • SAX-XN-N-A-Y-B-B-D-######
  • SAX-XN-N-A-Y-B-B-D-XXXXXX

VIN, First three positions ("SAX" in the above example):

  • = World Make Identifier:
    • SAX = MG-Rover

VIN, Fourth & Fifth position(s) ("XN" in the above example):

  • XN = Mini 1300

VIN, Sixth position ("N" in the above example):

  • = Class:
    • N = Sport, Cooper, Cabriolet
    • V = Kensington
    • W = HLS, Mayfair
    • Y = City, Sprite

VIN, Seventh position ("A" in the above example):

  • = Body type:
    • A = 2-door saloon/sedan
    • B = Cabriolet

VIN, Eighth position ("Y" in the above example):

  • = Engine:
    • D = 1300 Carb
    • M = 1300 Carb
    • X = 1300 SPi (standard compression ratio, 9.4:1)
    • Y = 1300 SPi (high compression ratio, 10.1:1)
    • Z = 1300 MPi (high compression ratio, 10.1:1)

VIN, Ninth position ("B" in the above example):

  • = RHD/LHD, Transmission type, Final Drive:
    • B = RHD, Manual, 3.105
    • C = RHD, Manual, 3.21
    • E = RHD, Manual, 2.76
    • K = RHD, Automatic
    • M = LHD, Manual, 3.105
    • N = LHD, Manual, 3.21
    • R = LHD, Manual, 2.76
    • Y = LHD, Automatic

VIN, Tenth position ("B" in the above example):

  • = Model Change:
    • A = 1300 Special Edition
    • B = 1300

VIN, Eleventh position ("D" in the above example):

  • = Assembly Plant:
    • D = Longbridge

VIN, Number positions ("######" in the above example):

  • = The sequential build number:
    • Starting with 010001