1996 Rover Mini 1.3i vTec
- Price:Can$30,000
- Contact:Nicky I
- UserName: sidesswipe
- Telephone:1
- E-Mail:Send Seller E-Mail
- Location:Toronto
- Country:Canada
- Year:1996
- Make:Rover Mini
- Model:1.3i
- Body Style:Sedan
- Motor:vTec
- Transmission:5-Speed Manual
- Body Color:grey
- Miles:150
- Ad Type:Mini
- Created on:Dec 03, 2024
- Modified on:Feb 14, 2025
- Other Ads:None
----updated ad from a few years ago---
First off, many may have remembered my ad from a few years ago with the unfinished project and was a shell.
I took the ad down due to the influx of spam and fake buyers and continued the project
The vehicle is finished now and fully drivable
Build was started before we had our child and life has taken over. I don't get to drive it and maybe put 100km since it has been done over the 3 years.
1996 Rover Mini VTEC
B18C Type R engine,5 Speed converted to Left hand.
Build.
Type R B18C - Engine had 68km when removed
JENVEY ITB's
60mm trumpets
Pico injectors
All gaskets refreshed
Moroso oil pan
waterpump, thermostat, tensioner, belt
Resurfaced Flywheel
New Clutch
Tuned by Lavigne Motorsports in 2023 when completed (lost the sheets) at 197hp 173tq
Ktuned shifter
All parts are new
full front end clear PPF done including doors and roof.
Minitec Vtec frame - upgraded for strength and stability
custom steering rack to sit like a normal car
Corbau seats
Wilwood pedal kit
Custom fiberglass dash flocked
Speedway custom gauges
custom panel with push start and kill switch
racing battery relocated inside vehicle
fuel cell with pump and filter
rear disc conversion with rear upgraded subframe
12" rim and tires new
coilover suspension
30L fuel cell
rear glass and windscreen new
all new window gaskets
custom wrapped door panels with handles
all wires new
new fuse panel with relays
Vibrant braided fuel and brake lines, front to back
Some build photos can be seen on my instagram page
https://www.instagram.com/sidesswipe/
Cons-
small tiny dent in passenger door
(not sure how it happened)
2. not really a Con, but if you know ITB's, startup takes some finesse. Getting the vehicle warm is key
Before contacting
Message first, establish contact, then we can eventually work to phone.
Text, email is fine.
Vehicle located in Toronto, Ontario. Canada.
Plated and Insured.
Asking 35k
link to pictures
https://drive.google.com/drive/folders/12e12Oi02tw2Mhri9JjDhaAv-4yQEPS32?usp=sharing
First off, many may have remembered my ad from a few years ago with the unfinished project and was a shell.
I took the ad down due to the influx of spam and fake buyers and continued the project
The vehicle is finished now and fully drivable
Build was started before we had our child and life has taken over. I don't get to drive it and maybe put 100km since it has been done over the 3 years.
1996 Rover Mini VTEC
B18C Type R engine,5 Speed converted to Left hand.
Build.
Type R B18C - Engine had 68km when removed
JENVEY ITB's
60mm trumpets
Pico injectors
All gaskets refreshed
Moroso oil pan
waterpump, thermostat, tensioner, belt
Resurfaced Flywheel
New Clutch
Tuned by Lavigne Motorsports in 2023 when completed (lost the sheets) at 197hp 173tq
Ktuned shifter
All parts are new
full front end clear PPF done including doors and roof.
Minitec Vtec frame - upgraded for strength and stability
custom steering rack to sit like a normal car
Corbau seats
Wilwood pedal kit
Custom fiberglass dash flocked
Speedway custom gauges
custom panel with push start and kill switch
racing battery relocated inside vehicle
fuel cell with pump and filter
rear disc conversion with rear upgraded subframe
12" rim and tires new
coilover suspension
30L fuel cell
rear glass and windscreen new
all new window gaskets
custom wrapped door panels with handles
all wires new
new fuse panel with relays
Vibrant braided fuel and brake lines, front to back
Some build photos can be seen on my instagram page
https://www.instagram.com/sidesswipe/
Cons-
small tiny dent in passenger door
(not sure how it happened)
2. not really a Con, but if you know ITB's, startup takes some finesse. Getting the vehicle warm is key
Before contacting
Message first, establish contact, then we can eventually work to phone.
Text, email is fine.
Vehicle located in Toronto, Ontario. Canada.
Plated and Insured.
Asking 35k
link to pictures
https://drive.google.com/drive/folders/12e12Oi02tw2Mhri9JjDhaAv-4yQEPS32?usp=sharing
 Send a Comment to the Seller. |
 To send a comment to this seller you must login.Click Here to Login |
Related Ads:
Let's make sure we're showing you the right parts! Please Select your car type Below:
I have had a few people across the border reach out to me about intrest in the vehicle.
It is totally possible to have the vehicle shipped. There are plenty of auto movers cross border and it is quite common to have vehicle moved across the border.
It is some paperwork but totally doable.
Take a peek at some shipping companies and let me know what you think.
I have another member looking into the cost right now as well. He is from Florida.
thanks,
I hope this message finds you well. I am writing to inquire about the 1996 Rover Mini 1.3i Sedan listed on Mini Mania's website. Could you please confirm if the vehicle is still available for sale?
Additionally, I am interested in knowing if the listed price of 30,000 CAD is still current.
Looking forward to your response at your earliest convenience. Thank you for your time.
Best regards,
Dakota Hunter
303-910-7942
[email protected]
vehicle is pending sale, will let you know if it falls through