Classic Mini Cooper Clutch Cylinders & Flywheel Case
Records - of
# |
Part No |
Qty |
Description |
|---|---|---|---|
| 1 | TRD100135 | 1 | Clutch housing –manual only Use U-TRD100135 |
| 2 | TUK100320 | 1 | Bearing, upgraded needle roller for idler gear |
| 3 | 13H2934 | 1 | Oil seal for clutch housing Pre 1992 |
| 3 | 13H2934MS | 1 | Oil seal for clutch housing, original Gaco for performance use Alternatives |
| 3 | LUF10005 | 1 | Oil seal for clutch housing, used with DAM2821 shield 1992 on |
| 4 | 22A2237 | 1 | Housing gasket to engine and transmission |
| 4 | GUG705563GM | 1 | Housing gasket to engine and transmission Genuine |
| 5 | DAM7758 | 3 | Bolt 5/16” UNF x 1 3/4” long for housing to block |
| 6 | WL2051 | 6 | Lock washer 5/16” |
| 7 | GFK5185 | 3 | Bolt 5/16” UNF x 1” long for housing to block Use HF0508 |
| 8 | 22A1762 | 1 | Locking tab, part of 18G8085 No Longer Available |
| 9 | 22A1761 | 1 | Locking tab, part of 18G8085 No Longer Available |
| 10 | 2A3521 | 1 | Locking tab, part of 18G8085 No Longer Available |
| 11 | GFK3212 | 9 | Plain nut 5/16”unf-case to gearbox Use GHF201 |
| 12 | GFK1125 | 4 | Lock washer 5/16” Use WL2051 |
| 13 | 22A1241 | 1 | Locking tab, part of 18G8085 No Longer Available |
| 14 | 22A1299 | 1 | Plate to retain dowel No Longer Available |
| 15 | DAM7758 | 3 | Bolt flanged head BH605141 alternative |
| 16 | DAM7753 | 3 | Bolt flanged head No Longer Available |
| 17 | GSY118 | 1 | Slave cylinder |
| 18 | 3H2428 | 1 | Bleed nipple |
| 19 | GRK4001 | 1 | Repair kit for GSY118 |
| 20 | HF0607 | 2 | Screw 3/8” UNF x 1” long, slave cylinder to plate |
| 21 | GFK1126 | 2 | Lock washer 3/8” Use GHF333 |
| 22 | DAM5992 | 1 | Plate for mounting slave cylinder |
| 23 | GFK5240 | 2 | Bolt 3/8” UNC x 1” long, plate to clutch housing |
| 24 | 21A1108 | 1 | Spacer 5/16”between bracket and case, was ADU7036 Was 1/4” spacer hole |
| 25 | SH604145 | 1 | Screw 1/4” UNF x 1 3/4” long Use HF0413 |
| 26 | GFK1124 | 1 | Lock washer 1/4” Use GHF331 |
| 27 | GMC1008 | 1 | Clutch master cylinder with plastic tank AP alternative |
| 27 | AAU4969 | 1 | Clutch master cylinder with metal tank Original fitment |
| 28 | 513123A | 1 | Cap for master cylinder Plastic cap |
| 29 | GRK3004 | 1 | Repair kit with 2 ring seals from 1985 on |
| 29 | GRK3007 | 1 | Repair kit with 1 ring seal and 1 cup type seal to 1985 |
| 30 | 31G279 | 1 | Sealing gasket for master cylinder |
| 31 | HF12 | 1 | Clutch metal pipe to master cylinder R/H/D complete Copper easy bend |
| 31 | HF32 | 1 | Clutch metal pipe to master cylinder L/H/D complete Copper easy bend |
| 32 | TM606031 | A/R | Male union 3/8”unf As required |
| 33 | GVP1009 | 1 | Clutch hose with banjo end |
| 33 | C-AJJ4025B | 1 | Braided clutch hose Alternatives |
| 33 | C-AJJ4025COMP | 1 | Braided clutch hose to replace existing hose and pipe Alternatives |
| 34 | C5192A | 1 | Banjo bolt for hose to slave cylinder |
| 35 | 3H550 | 1 | Copper sealing washer, banjo bolt to banjo |
| 36 | 233220A | 1 | Copper sealing washer, banjo to slave cylinder |
| 37 | 2K8686 | 1 | Nut to lock hose |
| 38 | WE600101 | 1 | 5/8" Lock Washer For Nut |
