Classic Mini Cooper Front Hydrolastic Displacer Suspension ( Known as Wet Suspension )

Records - of
# |
Part No |
Qty |
Description |
---|---|---|---|
1 | 21A2008 | 2 | Displacer unit (hose part of displacer only) No longer Available |
2 | 21A1496 | 2 | Dust excluder |
3 | 21A1515 | 2 | Protection sleeve for hose |
4 | 21A1487 | 2 | Protection sleeve retainer |
5 | 21A1522 | 1 | Adaptor plate bracket |
6 | 21A1524 | 2 | Adaptor Union |
7 | 17H8236 | 2 | Nut |
8 | LWZ410 | 2 | Washer |
9 | 21A1687 | 2 | Bracket to hold displacer to subframe No longer Available |
10 | 14A7031 | 2 | Plug for bracket |
11 | 21A1575 | 1 | Steel hydrolastic pipe, front to rear R/H |
12 | 21A1577 | 1 | Steel hydrolastic pipe, front to rear L/H |
12 | FSP3 | 2 | Plastic hydrolastic pipe, fits either side Alternative to steel |
13 | 2A4325 | 2 | Upper arm support |
14 | MSSK1 | 2 | Thrust collar part of kit Available in kit MSSK1 per side |
15 | 2A7324 | 2 | Thrust washer |
16 | 2A7327 | 4 | Rubber sealing ring |
17 | 2A4327 | 2 | Retaining plate No Longer Available |
18 | GHF335 | 4 | Spring washer was LWZ308 |
19 | FNZ508 | 4 | Nut |
20 | 21A1889 | 2 | Lower arm support shaft |
21 | 21A1882 | 4 | Lower arm bushes with metal insert All ‘S’ plus 1966 on |
21 | WB2 | 1 | Lower arm bush set, polyeurethane Taperd hole in arm |
21 | 2A4294 | 4 | Lower arm shouldered bush, no insert Pre 1966 models |
21 | WB1 | 1 | Lower arm bush set, polyeurethane Straight hole in arm |
22 | GHF333 | 2 | Spring washer was LWZ206 |
23 | FNZ506 | 2 | Nut |
24 | 21A450 | 2 | Tie rod |
25 | 53K1031 | 2 | Tie rod bolt Available as kit 8G4249 per side |
26 | FNZ505 | 2 | Nut |
27 | GHF332 | 2 | Washer |
28 | 31G1155 | 4 | Tie bar bush |
29 | ACA9759 | 2 | Cup washer |
30 | PWZ207 | 2 | Flat washer |
31 | GHF224 | 2 | Nut |
32 | 21A1598 | 2 | Bump stop |
33 | HBZ420 | 2 | Bolt No longer Available |
34 | LWZ204 | 2 | Spring washer |
35 | FNZ104 | 2 | Nut |
36 | 2A4267 | 2 | Rebound buffer |
37 | 13H2776 | 2 | Screw |
38 | 21A1163 | 2 | Knuckle joint Aftermarket |
38 | GSV1118 | 2 | Knuckle joint Genuine Type |
39 | 21A423 | 2 | Nylon cup Part of GSV1118 |
40 | 21A425 | 2 | Dust cover |
41 | 21A1845 | A/R | Packing washer to raise suspension |