Classic Mini Cooper Heater Valves, Hoses and Controls
Records - of
# |
Part No |
Qty |
Description |
|---|---|---|---|
| 1 | ADU9102 | 1 | Heater valve, angled body fits cylinder head, takes 1/2”hose To 1989 |
| 1 | 13H5506 | 1 | Heater valve, straight body fits cylinder head, takes 1/2”hose To 1989 |
| 2 | JJB10011 | 1 | Heater valve, in line floating type takes 5/8”hose 1989 on except MPI |
| 3 | JJB100260 | 1 | Heater valve, fitted on side of heater inside car MPI only 1996 on |
| 4 | GRH905 | 1 | Hose 5/8” to use with 1/2”hose on item No1 see notes below Sold per foot |
| 4 | C-GRH1007 | 1 | Silicon 1/2”bore hose 1.2 metre long, heater to bottom hose When ADU9102 fitted |
| 4 | GRH1006 | 1 | Hose 1/2”bore 1985-1989, to item No1 valve-see notes below Use COOLING01, Sold per foot |
| 5 | GRH905 | 1 | Hose 5/8” to use with 1/2”hose on item No1-see notes below Sold per foot |
| 5 | C-GRH1006 | 1 | Silicon 1/2” bore hose 1 metre long, heater to ADU9102 valve When ADU9102 fitted |
| 5 | GRH1006 | 1 | Hose 1/2”bore 1985-1989, to item No1 valve-see notes below Use COOLING01, Sold per foot |
| 6 | GRH905 | A/R | Hose 5/8”bore, cylinder head outlet to valve Sold per foot |
| 7 | JHB10017 | 1 | Hose 5/8”bore, heater to in line valve, 1989 on |
| 8 | JHC10004 | 1 | Hose 5/8” bore, heater to bottom hose, was GRH1219 Use GRH905 |
| 9 | GHC608 | A/R | Clip for 5/8”hose Use CC6 |
| 9 | GHC405 | A/R | Clip for 1/2”hose Use CC6 |
| 10 | PEU10016 | 1 | Bracket for hoses to rocker cover No Longer Available |
| 11 | CDU2153A | 1 | Swivel clip for 5/8”hoses No Longer Available |
| 12 | MOC211 | A/R | Connector 1/2”, bottom hose to 1/2”heater hose When required |
| 13 | MOC210 | 1 | Connector 1/2” bottom hose to 5/8”heater hose 998cc |
| 13 | MOC212 | 1 | Connector 5/8” bottom hose to 5/8”heater hose 1275cc 1990 on |
| 14 | 12G2534 | 1 | Take off on cylinder head for 5/8”hose |
| 15 | TAM1368 | 2 | Flanged head screw for 12G2534 1/4" UNF x 1” long - Use 53K402 stud and nuts No Longer Available |
| 16 | 34G3651 | 1 | Hose grommet when ADU9102 valve is fitted, for 1/2” hose To 1989 Use 600395 |
| 16 | CLP6235 | 2 | Hose grommet when in line valve is fitted for 5/8”hose 1989 on |
| 17 | JHC10017 | 1 | Hose, 5/8”shaped- heater to bottom hose 1991-1996 Use GRH905 |
| 18 | JHB10018 | 1 | Hose, 5/8”straight 18”(45mm) long-heater to valve 1991-96 Use GRH905 |
| 19 | JHB100570 | 1 | Hose, 5/8”straight 5”(12mm) long-heater to valve MPI only Use alternative GRH905 |
| 20 | PCH113700 | 1 | Hose, 5/8” heater valve to Thermostat housing MPI only Use alternative GRH905 |
| 21 | PEH100950 | 1 | Hose, 5/8” heater to bottom hose MPI only Use alternative GRH905 |
| 22 | CHM373 | 1 | Heater cable, when heater valve on cylinder head, pre 1988 |
| 22 | JFF10003 | 1 | Heater cable, in line heater valve 1988 to 1992 31” long |
| 22 | JFF10051 | 1 | Heater cable, in line heater valve SPI only 42” long |
| 22 | JFF100910 | 1 | Heater cable, in line heater valve MPI only |
| 23 | GHF323 | 1 | Shake proof washer 3/8” |
| 24 | GFK3213 | 1 | Plain nut 3/8”unf |
| 25 | JFD10039 | 1 | Knob insert for cable (original RED/Blue arrows 1990 on) Cables have early insert |
| 26 | CAM5969 | 1 | Grommet for cable in body work |
| NOTE: | Heater hoses for cars up to 1991 used heater matrix BAU5043 and were on the right hand side of the heater, whereas later cars used JEF10005 heater matrix and were on the left hand side of the heater, hence different hoses from item 17-21 |
||
| NOTE: | Cars from late 1984 to late 1988 had 5/8”outlets on the heater matrix and will require 5/8”hose and then reducers MOC210 from 5/8” to 1/2”size, to enable using 1/2”hose to fit the heater valve and bottom hose. The 1/2”silicon hoses when well lubricated will push over the 5/8”matrix outlets as they are of a more supple and longer lasting material. |
