yes I meant back ones behind dash

You still need the parcelshelf/tray liner if you have a Rokee......otherwise things would fall straight to the floor...lol

You can make your own template using poster board or other workable cardboard. Measure roughly then cut it out oversize. Insert and nibble away to you get the fit you desire. On mine (with later 3 gauge cluster in front of the drvier), I found it worked best fitted snugly into the back curl of the shelf cross-member and pressing against the firewall card. (Or maybe the other way... I forget! Snug anyway.) You also probably want to fit it for the step up at the central control hump (choke, switches heater etc.) as one piece. That's on the passenger side. On the driver's side it is a much smaller card. Central binacle cards should be almost symmetrical. When happy with the fit, transfer to the final card stock. I used a sheet styrene-like plastic sign material (not the coroplast stuff). To get it to fit the control hump, I used a heat gun to form radiused bends. Then I clad it in upholstery vinyl.

when bought was out in field dash swollen beyond repair found new one and cards were soupy mess

found used dash and salvaved one dash car    do you install all cards behind wood dash or?

There's gotta be somebody in the Vancouver Mini Club with a liner you can borrow as a template. The Mini in your profile looks like a latish 70s Mini Special. Should it not have a Rokee Wood dash?

Did you search theminiforum? They have a lot of stuff like that. The only problem I've had searching there is the differences in what they call something, what you may be looking for may be called a "dash tray liner" 

does anyone have a template for DASH LOWER PARCEL SHELF LINER

can email it to me

[email protected]