× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items
Spacer fits up against the primary gear on the crankshaft and held on by the "C" washer 22A319 - both these parts wear as well as the gear.Only fits cranks from 1962 on with 1.5" tail width-NOT the earlier 1.3/8" tail size.0.164 plus or minus one thou.
Classic Austin Mini Primary Gear Backing Ribg

Classic Austin Mini Primary Gear Backing Ribg

Classic Austin Mini Primary Gear Backing Ribg
Part No: 88G549
$30.95
Qty:
Fits the following:
Classic Mini
Alternate Products
Classic Austin Mini Primary Gear Backing Ring, Genuine Type
$23.95 Classic Austin Mini Primary Gear Backing Ring, Genuine Type
Spacer fits up against the primary gear on the crankshaft and held on by the "C" washer 22A319 - both these parts wear as well as the gear.Only fits cranks from 1962 on with 1.5" tail width-NOT the earlier 1.3/8" tail size.0.164 plus or minus one thou.
Recommended items for: 88G549
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Related Technical Articles:
ENGINE TRANSPLANTS - Engine to gearbox fitment
Created: November 01, 2000
Assembling the engine to gearbox (transmission) is explained and simplified in this article. Contrary to popular mis-guidance, all BBUs will fit all four-syncro gearboxes. It was only the three-syncro boxes that varied in casting dimensions causing hassles where 1275s were applied to 850/998 gearbox casings. The longer throw and bigger crank and rod assembly dimensions fouled the sculpted areas in the gearbox case,