This is the GREEN molded carpet kit that will fit any Mini Traveller/Countryman or early Mini Clubman Estates built with the early rounder front tunnel, with the MKI floor start 'hump' (regardless of whether direct or later remote gear-change).
The kit contains the front (molded) and rear mats (the rear is not molded but supplied flat as the floor is much less contoured), a bulkhead covering piece, front wheel arches, a pair of sill carpets and a cross member covering piece. All necessary clips and fitting instructions are included along with a vinyl handbrake gaiter. Apart from the two main floor mats the remaining items need to be glued in place on top of the included insulating felts. Glue is not included in this kit and we would recommend you use a couple of cans of spray contact adhesive.
The sill carpets are supplied cut to size and fit with minimal trimming. The cross member carpet is supplied to be fitted right across the car, originally these only covered about 10" of the cross member working in from the sides and this piece can be cut down to size for originality. We have marked positions under the front molded carpet to fit either early or late gear lever positions as well as steering column position for LHD or RHD cars. It is easiest to get the best possible fit and neatest finish by removing the column from the car entirely before fitting the front mat.
The kit contains the front (molded) and rear mats (the rear is not molded but supplied flat as the floor is much less contoured), a bulkhead covering piece, front wheel arches, a pair of sill carpets and a cross member covering piece. All necessary clips and fitting instructions are included along with a vinyl handbrake gaiter. Apart from the two main floor mats the remaining items need to be glued in place on top of the included insulating felts. Glue is not included in this kit and we would recommend you use a couple of cans of spray contact adhesive.
The sill carpets are supplied cut to size and fit with minimal trimming. The cross member carpet is supplied to be fitted right across the car, originally these only covered about 10" of the cross member working in from the sides and this piece can be cut down to size for originality. We have marked positions under the front molded carpet to fit either early or late gear lever positions as well as steering column position for LHD or RHD cars. It is easiest to get the best possible fit and neatest finish by removing the column from the car entirely before fitting the front mat.
This is the GREEN molded carpet kit that will fit any Mini Traveller/Countryman or early Mini Clubman Estates built with the early rounder front tunnel, with the MKI floor start 'hump' (regardless of whether direct or later remote gear-change).
The kit contains the front (molded) and rear mats (the rear is not molded but supplied flat as the floor is much less contoured), a bulkhead covering piece, front wheel arches, a pair of sill carpets and a cross member covering piece. All necessary clips and fitting instructions are included along with a vinyl handbrake gaiter. Apart from the two main floor mats the remaining items need to be glued in place on top of the included insulating felts. Glue is not included in this kit and we would recommend you use a couple of cans of spray contact adhesive.
The sill carpets are supplied cut to size and fit with minimal trimming. The cross member carpet is supplied to be fitted right across the car, originally these only covered about 10" of the cross member working in from the sides and this piece can be cut down to size for originality. We have marked positions under the front molded carpet to fit either early or late gear lever positions as well as steering column position for LHD or RHD cars. It is easiest to get the best possible fit and neatest finish by removing the column from the car entirely before fitting the front mat.
The kit contains the front (molded) and rear mats (the rear is not molded but supplied flat as the floor is much less contoured), a bulkhead covering piece, front wheel arches, a pair of sill carpets and a cross member covering piece. All necessary clips and fitting instructions are included along with a vinyl handbrake gaiter. Apart from the two main floor mats the remaining items need to be glued in place on top of the included insulating felts. Glue is not included in this kit and we would recommend you use a couple of cans of spray contact adhesive.
The sill carpets are supplied cut to size and fit with minimal trimming. The cross member carpet is supplied to be fitted right across the car, originally these only covered about 10" of the cross member working in from the sides and this piece can be cut down to size for originality. We have marked positions under the front molded carpet to fit either early or late gear lever positions as well as steering column position for LHD or RHD cars. It is easiest to get the best possible fit and neatest finish by removing the column from the car entirely before fitting the front mat.
Loading...

Loading...
Loading...

Loading...

Loading...

Loading...

Loading...