× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items

Fiberglass trunk bootlid for Sprites and Midgets after 1961. These bootlids are like the metal original panels with mounting spots to use factory hinges and latches.

Fiberglass pieces have extended lead-times as they are hand made specialty products, usually around 4-6 weeks. Full payment is required at time of order.

  • Installation instructions are not generally available as most panels require some customization in fitment
  • "Plus Internals" refers to items with some factory mounting points but may still need additional fitting
  • Large items like front/rear ends and hard tops ship truck freight for around $300-450 depending on your location, fuel costs, and destination type (residence/business)
Fiberglass Replacement Bootlid Plus Internals, Sprite & Midget

Fiberglass Replacement Bootlid Plus Internals, Sprite & Midget

Fiberglass Replacement Bootlid Plus Internals, Sprite & Midget

Fiberglass Replacement Bootlid Plus Internals, Sprite & Midget

Fiberglass Replacement Bootlid Plus Internals, Sprite & Midget
Selected: Sprite & Midget Bootlid Plus Internals
Part No: HONMG059
$451.95
Qty:
Specially Priced. Discounts Do Not Apply.
Fits the following:
Sprite & MG Midget
PayPal Pay Later
Replacement fiberglass bonnet (hood) for Sprites and Midgets after 1961. This is a lightweight type bonnet for racing the is cross braced. Mounting this bonnet will require custom mounting using Dzus™ fasteners or the like (not included).

 

Fiberglass pieces have extended lead-times as they are hand made specialty products, usually around 4-6 weeks. Full payment is required at time of order.

Replacement fiberglass bonnet (hood) for Sprites and Midgets after 1961. Is effectively the same as the metal bonnet but in fiberglass including the factory bonnet hinge mounting points with captive nuts.

 

Fiberglass pieces have extended lead-times as they are hand made specialty products, usually around 4-6 weeks. Full payment is required at time of order.

Fiberglass trunk bootlid for Sprites and Midgets after 1961. These bootlid shells are lightweight racing types and require securing with Dzus™ fasteners or the like (not included).

Fiberglass pieces have extended lead-times as they are hand made specialty products, usually around 4-6 weeks. Full payment is required at time of order.

One-piece fiberglass front end for all Sprites and Midgets after 1961. Matches the original metal panels closely. While made to match the look of later Sprites and Midgets, this front end can be fitted on any year Sprite including Bugeyes.

Fiberglass pieces have extended lead-times as they are hand made specialty products, usually around 4-6 weeks. Full payment is required at time of order.

One-piece fiberglass front end for all Sprites and Midgets after 1961. This is a racing type front end with wheel arches for wider wheels and tires. While made to match the look of later Sprites and Midgets, this front end can be fitted on any year Sprite including Bugeyes.

Fiberglass pieces have extended lead-times as they are hand made specialty products, usually around 4-6 weeks. Full payment is required at time of order.

One-Piece front end for Sprites and Midgets after 1961. This front end is a custom look that adds MGB styled headlamp locations and more of a Seabring front end look to your Spridget.  This front end can be fitted on any year Sprite including Bugeyes.

Fiberglass pieces have extended lead-times as they are hand made specialty products, usually around 4-6 weeks. Full payment is required at time of order.

Front valence in fiberglass for Sprites and Midgets after 1961.

Fiberglass pieces have extended lead-times as they are hand made specialty products, usually around 4-6 weeks. Full payment is required at time of order.

Lower front fiberglass spoiler to fit Sprites and Midgets after 1961.

Fiberglass pieces have extended lead-times as they are hand made specialty products, usually around 4-6 weeks. Full payment is required at time of order.

These Honeybourne Hard Tops are becoming more and more popular with Spridget owners. This is a Works type hard top made to look like the 1960's originals - fits Mk 2 Sprites and Mk 1 Midgets only 1961 to 1963. This top is supplied in WHITE gelcoat which is finished for the weather or it can be painted by your shop. For the black  gelcoat version, use part number HONMG066B.

Fiberglass pieces have extended lead-times as they are hand made specialty products, usually around 4-6 weeks. Full payment is required at time of order.

These Honeybourne Hard Tops are becoming more and more popular with Spridget owners. This is a Works type hard top made to look like the 1960's originals - fits Mk 2 Sprites and Mk 1 Midgets only 1961 to 1963. This top is supplied in BLACK gelcoat which is finished for the weather or it can be painted by your shop. For the white gelcoat version, use part number HONMG066W.

Fiberglass pieces have extended lead-times as they are hand made specialty products, usually around 4-6 weeks. Full payment is required at time of order.

These Honeybourne Hard Tops are becoming more and more popular with Spridget owners. This is a Works type hard top made to look like the 1960's originals - fits Mk IV Sprites and Mk III Midgets from 1967 onward. This top is supplied in BLACK gelcoat which is finished for the weather or it can be painted by your shop. For the white gelcoat version, use part number HONMG066MK3W.

Fiberglass pieces have extended lead-times as they are hand made specialty products, usually around 4-6 weeks. Full payment is required at time of order.

These Honeybourne Hard Tops are becoming more and more popular with Spridget owners. This is a Works type hard top made to look like the 1960's originals - fits Mk 4 Sprites and Mk 3 Midgets from 1967 onward. This top is supplied in WHITE gelcoat which is finished for the weather or it can be painted by your shop. For the black gelcoat version, use part number HONMG066MK3B.

Fiberglass pieces have extended lead-times as they are hand made specialty products, usually around 4-6 weeks. Full payment is required at time of order.

These Honeybourne Hard Tops are becoming more and more popular with Spridget owners. This is a Wrap Around type hard top made to look like the 1960's originals - fits Mk IV Sprites and Mk III Midgets only after 1966. This top is supplied in BLACK gelcoat which is finished for the weather or it can be painted by your shop. For the white  gelcoat version, use part number HONMG067W.

Fiberglass pieces have extended lead-times as they are hand made specialty products, usually around 4-6 weeks. Full payment is required at time of order.

These Honeybourne Hard Tops are becoming more and more popular with Spridget owners. This is a Wrap Around type hard top made to look like the 1960's originals - fits Mk IV Sprites and Mk III Midgets only after 1966. This top is supplied in WHITE gelcoat which is finished for the weather or it can be painted by your shop. For the black  gelcoat version, use part number HONMG067B.

Fiberglass pieces have extended lead-times as they are hand made specialty products, usually around 4-6 weeks. Full payment is required at time of order.

Fiberglass radio console for fitting an aftermarket radio to you Sprite or Midget. These are mounted infront of the gear shift lever on the transmission tunnel just under the dash.

Fiberglass pieces have extended lead-times as they are hand made specialty products, usually around 4-6 weeks. Full payment is required at time of order.

Hand laid firberglass replacement dash for Right Hand Drive Bugeye Sprites. Perfect for race cars and custom creations.

 

Fiberglass pieces have extended lead-times as they are hand made specialty products, usually around 4-6 weeks. Full payment is required at time of order.

These Honeybourne Hard Tops are becoming more and more popular with Bugeye owners. This is a standard type hard top made to look like the 1960's originals. Made specifically for the Bugeye (Frogeye) MKI Sprite only. This top is supplied in BLACK gelcoat which is finished for the weather or it can be painted by your shop. For the white gelcoat version, use part number HONMG003W.

 

Fiberglass pieces have extended lead-times as they are hand made specialty products, usually around 4-6 weeks. Full payment is required at time of order.

These Honeybourne Hard Tops are becoming more and more popular with Bugeye owners. This is a standard type hard top made to look like the 1960's originals. Made specifically for the Bugeye (Frogeye) MKI Sprite only. This top is supplied in WHITE gelcoat (same as the black top that's pictured above) which is finished for the weather or it can be painted by your shop. For the black gelcoat version, use part number HONMG003B.

 

Fiberglass pieces have extended lead-times as they are hand made specialty products, usually around 4-6 weeks. Full payment is required at time of order.

Left hand fiberglass replacement door for Bugeye Sprites.

 

Fiberglass pieces have extended lead-times as they are hand made specialty products, usually around 4-6 weeks. Full payment is required at time of order.

Right hand fiberglass replacement door for Bugeye Sprites.

 

Fiberglass pieces have extended lead-times as they are hand made specialty products, usually around 4-6 weeks. Full payment is required at time of order.

Fiberglass rear body section for a Bugeye Sprite.  This is a replacement rear end for all Bugeyes from 1958-1961, however, there's no reason that later cars couldn't be retro-fitted with a Bugeye rear end look.

 

Fiberglass pieces have extended lead-times as they are hand made specialty products, usually around 4-6 weeks. Full payment is required at time of order.

Fiberglass front wings (fenders) for the Midgets that came with factory rubber (polyurethane) bumpers from 1974 until the end of production. This is the LEFT FRONT wing.

 

Fiberglass pieces have extended lead-times as they are hand made specialty products, usually around 4-6 weeks. Full payment is required at time of order.

Fiberglass front wings (fenders) for the Midgets that came with factory rubber (polyurethane) bumpers from 1974 until the end of production. This is the RIGHT FRONT wing.

 

Fiberglass pieces have extended lead-times as they are hand made specialty products, usually around 4-6 weeks. Full payment is required at time of order.

Complete fiberglass front-end that replaces the stock metal version. Designed for MKI Bugeye Sprite Race Cars as this is a lighter version than the street type.

 

Fiberglass pieces have extended lead-times as they are hand made specialty products, usually around 4-6 weeks. Full payment is required at time of order.

Complete fiberglass front-end that replaces the stock metal version. Designed for the MKI Bugeye Sprite, but can be fitted to any later model ("Square Nose"). Once installed and finished these are hard to distinguish from the metal original.

 

Fiberglass pieces have extended lead-times as they are hand made specialty products, usually around 4-6 weeks. Full payment is required at time of order.

Fiberglass front wings (fenders) for the "square nosed" Sprites and Midgets from 1961-1968 that came with factory chrome bumpers. This is the LEFT FRONT wing. Note: these fenders have the higher placed turn single lens - later Sprites and Midgets had the lamps in a lower position, closer to the bumper. It's a subtle difference, but only becomes obvious when a car has one of each year range fender fitted. These fenders will fit the Spridgets up to 1973 but you should buy both sides so they match.

Fiberglass pieces have extended lead-times as they are hand made specialty products, usually around 4-6 weeks. Full payment is required at time of order.

Fiberglass front wings (fenders) for the "square nosed" Sprites and Midgets from 1961-1968 that came with factory chrome bumpers. This is the RIGHT FRONT wing. Note: these fenders have the higher placed turn single lens - later Sprites and Midgets had the lamps in a lower position, closer to the bumper. It's a subtle difference, but only becomes obvious when a car has one of each year range fender fitted. These fenders will fit the Spridgets up to 1973 but you should buy both sides so they match.

Fiberglass pieces have extended lead-times as they are hand made specialty products, usually around 4-6 weeks. Full payment is required at time of order.

Fiberglass trunk bootlid for Sprites and Midgets after 1961. These bootlids are like the metal original panels with mounting spots to use factory hinges and latches.

Fiberglass pieces have extended lead-times as they are hand made specialty products, usually around 4-6 weeks. Full payment is required at time of order.

Loading...
Loading...
Loading...
Related Technical Articles:
Fiberglass panels for Austin Healey Sprite and MG Midget
Created: January 15, 2018
Made in the UK and shipped from California. The fiberglass options available for the Spridget range of cars is far reaching. For the Bugeye Sprite you can built almost a complete car with both the entire front and rear sections available, even the doors are available in Fiberglass.  The square nose later models of the Sprite and Midget can be upgraded with stock or racing weight Fiberglass.  A one piece Fiberglass complete front end is also available. The most exciting parts now available are the various Hard tops. Check the listing below.
Loading...
Loading...
Loading...