Mini Factory 62.3mm Exhaust Clamp for the JCW Exhaust system. Sold each.
Fits the following models when installing the JCW Rear Section Exhaust:
2002-2006 R53 MINI Cooper S Hardtop
2005-2008 R52 MINI Cooper S Convertible
Mini Factory 62.3mm Exhaust Clamp for the JCW Exhaust system. Sold each.
Fits the following models when installing the JCW Rear Section Exhaust:
2002-2006 R53 MINI Cooper S Hardtop
2005-2008 R52 MINI Cooper S Convertible
Mini Cooper JCW Exhaust Rear Section. This is the same exhaust rear section that was installed by the factory on the Gen1 JCW models. If the stock mufflers on your Cooper S has rusted out, this is a great replacement with a slight upgrade in performance and a sporting tone!
The JCW Exhaust Rear Section does not include the JCW Exhaust Tips or the JCW Exhaust Clamp. Select the 'Complete Kit' for a complete kit to include all these parts.
Fits the Following models:
01/2004-2006 R50 MINI Cooper and R53 Cooper S Hardtop
2005-2008 R52 MINI Cooper and Cooper S Convertible
Fits the following models with slight modifications (see note below):
2002-12/2003 R50 MINI Cooper and R53 Cooper S Hardtop
The pipe diameter is 2.25" from the secondary cat to the Y, then its 2.0" from the Y to the mufflers, and 1.5" from the mufflers to the tips.
NOTES:
- On JCW and Cooper S models built before January 2004, the inside hangers will need to be rotated 90 degrees. On these earlier models, all 4 hangers are oriented front-to-back. Beginning with the 01/2004 production, the inside hangers are oriented side-to-side. Any muffler shop should be able to heat the hanger with a torch and change the orientation.
- For the Cooper S models, this Rear Section must be spliced in to replace the original Cooper S rear section. Professional installation is recommended.
- Choose the 'Complete Kit' for everything you need to install this system.
Exhaust Rear Section OEM | Gen1 MINI Cooper JCW R52 R53Exhaust Rear Section OEM | Gen1 MINI Cooper JCW R52 R53
Exhaust Rear Section OEM | Gen1 MINI Cooper JCW R52 R53Exhaust Rear Section OEM | Gen1 MINI Cooper JCW R52 R53
Mini Cooper JCW Exhaust Rear Section. This is the same exhaust rear section that was installed by the factory on the Gen1 JCW models. If the stock mufflers on your Cooper S has rusted out, this is a great replacement with a slight upgrade in performance and a sporting tone!
The JCW Exhaust Rear Section does not include the JCW Exhaust Tips or the JCW Exhaust Clamp. Select the 'Complete Kit' for a complete kit to include all these parts.
Fits the Following models:
01/2004-2006 R50 MINI Cooper and R53 Cooper S Hardtop
2005-2008 R52 MINI Cooper and Cooper S Convertible
Fits the following models with slight modifications (see note below):
2002-12/2003 R50 MINI Cooper and R53 Cooper S Hardtop
The pipe diameter is 2.25" from the secondary cat to the Y, then its 2.0" from the Y to the mufflers, and 1.5" from the mufflers to the tips.
NOTES:
- On JCW and Cooper S models built before January 2004, the inside hangers will need to be rotated 90 degrees. On these earlier models, all 4 hangers are oriented front-to-back. Beginning with the 01/2004 production, the inside hangers are oriented side-to-side. Any muffler shop should be able to heat the hanger with a torch and change the orientation.
- For the Cooper S models, this Rear Section must be spliced in to replace the original Cooper S rear section. Professional installation is recommended.
- Choose the 'Complete Kit' for everything you need to install this system.
Mini Cooper JCW Exhaust Rear Section Install Kit. This is the same exhaust rear section that was installed by the factory on the Gen1 JCW models. If the stock mufflers on your Cooper S has rusted out, this is a great replacement with a slight upgrade in performance and a sporting tone!
This Complete Kit includes:
- JCW Exhaust Rear Section
- JCW Exhaust Chrome Tips (one pair)
- JCW Exhaust Clamp
Fits the Following models:
01/2004-2006 R50 MINI Cooper and R53 Cooper S Hardtop
2005-2008 R52 MINI Cooper and Cooper S Convertible
Fits the following models with slight modifications (see note below):
2002-12/2003 R50 MINI Cooper and R53 Cooper S Hardtop
The pipe diameter is 2.25" from the secondary cat to the Y, then its 2.0" from the Y to the mufflers, and 1.5" from the mufflers to the tips.
NOTES:
- On JCW and Cooper S models built before January 2004, the inside hangers will need to be rotated 90 degrees. On these earlier models, all 4 hangers are oriented front-to-back. Beginning with the 01/2004 production, the inside hangers are oriented side-to-side. Any muffler shop should be able to heat the hanger with a torch and change the orientation.
- For the Cooper S models, this Rear Section must be spliced in to replace the original Cooper S rear section. Professional installation is recommended.
- Choose the 'Complete Kit' for everything you need to install this system.
Mini Cooper JCW Exhaust Rear Section Install Kit OEM Gen1 R52 R53
Mini Cooper JCW Exhaust Rear Section Install Kit OEM Gen1 R52 R53
Mini Cooper JCW Exhaust Rear Section Install Kit. This is the same exhaust rear section that was installed by the factory on the Gen1 JCW models. If the stock mufflers on your Cooper S has rusted out, this is a great replacement with a slight upgrade in performance and a sporting tone!
This Complete Kit includes:
- JCW Exhaust Rear Section
- JCW Exhaust Chrome Tips (one pair)
- JCW Exhaust Clamp
Fits the Following models:
01/2004-2006 R50 MINI Cooper and R53 Cooper S Hardtop
2005-2008 R52 MINI Cooper and Cooper S Convertible
Fits the following models with slight modifications (see note below):
2002-12/2003 R50 MINI Cooper and R53 Cooper S Hardtop
The pipe diameter is 2.25" from the secondary cat to the Y, then its 2.0" from the Y to the mufflers, and 1.5" from the mufflers to the tips.
NOTES:
- On JCW and Cooper S models built before January 2004, the inside hangers will need to be rotated 90 degrees. On these earlier models, all 4 hangers are oriented front-to-back. Beginning with the 01/2004 production, the inside hangers are oriented side-to-side. Any muffler shop should be able to heat the hanger with a torch and change the orientation.
- For the Cooper S models, this Rear Section must be spliced in to replace the original Cooper S rear section. Professional installation is recommended.
- Choose the 'Complete Kit' for everything you need to install this system.
You should be able to re-use the existing rubber hangers.
Mini Mania Tech Team
The MINI Cooper Parts and Accessories Experts
Mini Factory 62.3mm Exhaust Clamp for the JCW Exhaust system. Sold each.
Fits the following models when installing the JCW Rear Section Exhaust:
2002-2006 R53 MINI Cooper S Hardtop
2005-2008 R52 MINI Cooper S Convertible
You should be able to re-use the existing rubber hangers.
Mini Mania Tech Team
The MINI Cooper Parts and Accessories Experts
Loading...
Loading...
Loading...
Loading...
Loading...
- Home
- Related Websites
- Products
- Articles & Help
- Social
- Visit us on:
-
Mini Mania
870 Gold Flat Rd.
Nevada City, CA 95959 USAPhone: 530.470.8300
Fax: 530.470.8388
Your Login Failed.
Your E-Mail and/or password are incorrect. Please try again.
Passwords are case-sentive.
If you continue to have problems click on the Help Icon for additional options.
Login with your E-Mail Address. If you would like your login information reset, click on the button below to request your login information to be resent.