Classic Mini Cooper Cooper 'S' MK3 ( 12h398 ) & 12g Engine Numbers as Fitted to Early MG, Wolseley, Riley, Princess, 1300cc
Records - of
# |
Part No |
Qty |
Description |
|---|---|---|---|
| 1 | AEG624 | 4 | Connecting rod |
| 2 | AEG519 | 8 | Con rod bolt |
| 2 | BE6001 | 1 | Con rod bolt set, ARP Comp grade |
| 3 | AEG147 | 8 | Con rod bolt nut (EAC5541A non nyloc alternative) |
| 4 | AEG623 | 1 | Original crankshaft in EN16, tuftrided (12G1505 casting) NLA, use C-AEG479 |
| 4 | C-AEG479 | 1 | Crankshaft (AEG480 casting) 1275 ‘S’ (Nitrided only) |
| 4 | 12G1287 | 1 | Crankshaft (fitted solid wall block, 1300 mains size) 12G type 1.625 |
| 5 | 6K836 | 1 | Crankshaft keyway |
| 6 | VP572 | 1 | Con rod bearing set (8G2399) Also in 10/20/30/40 oversize |
| 7 | VP91120 | 1 | Main bearings set (8G2301) Also in 10/20/30/40 oversize |
| 8 | VPW41 | 1 | Thrust washer kit (BHM1293) Also in 03/30 thou oversize |
| 9 | 22G1053 | 1 | Primary gear (24 teeth) |
| 10 | DAM8889 | 1 | Front bush was 22G770 |
| 11 | 22G109 | 1 | Rear bush |
| 12 | DAM6490 | 1 | Primary gear shim 2.84-2.89mm (.112-114") These shims are used to give the correct end float of 3-6 thou on the primary gear check 22A319 and 88G459 for wear. |
| 12 | DAM6486 | 1 | Primary gear shim 2.89-2.94mm (.114-116") |
| 12 | DAM6487 | 1 | Primary gear shim 2.94-2.99mm (.116-118") |
| 12 | DAM6488 | 1 | Primary gear shim 2.99-3.04mm (.118-120") |
| 12 | DAM6489 | 1 | Primary gear shim 3.04-3.09mm (.120-122") |
| 13 | 22A319 | 1 | Thrust washer U clip |
| 14 | 88G549 | 1 | Backing ring |
| 15 | AEG523 | 1 | Camshaft 1300cc |
| 15 | AEG542 | 1 | Camshaft Cooper ‘S’ |
| 16 | WKN505 | 1 | Keyway |
| 17 | CHM108 | 1 | Oil pump driving flange |
| 18 | AHU2379 | 1 | Camshaft locating plate |
| 19 | GHF117 | 3 | Bolt for locating plate |
| 20 | GHF321 | 3 | Shakeproof washer for locating plate |
| 21 | 12G1397 | 1 | Camshaft gear cast iron Gears and chains available as C-AJJ3323 Duplex kit in cast iron. Or C-AJJ3325 in lightened steel. |
| 22 | 12G1699 | 1 | Crankshaft gear cast iron |
| 23 | 6K629 | 1 | Camshaft nut |
| 24 | 2A759 | 1 | Locktab |
| 25 | 2H4905 | 1 | Chain |
| 26 | 6K628 | A/R | Washer to shim crank gear |
| 27 | 12G619 | 1 | Front plate gasket |
| 28 | AEG161 | 1 | Front plate NLA |
| 29 | SH605051 | 2 | Screw plate to block |
| 30 | GHF332 | 2 | Washer was LWZ305 |
| 31 | AEA687 | 2 | Screw, front plate to maincap |
| 32 | AEG314 | 8 | Push rod |
| 33 | AEG584 | 8 | Cam follower with oil hole |
| 34 | 12G4499 | 1 | Distributor spindle |
| 35 | 13H2792 | 1 | Distributor housing oil seal |
| 36 | 12A1136 | 1 | Distributor housing CWE |
