Classic Mini Cooper Magic Wand / Remote Type Selections & Speedo Drive
Records - of
# |
Part No |
Qty |
Description |
|---|---|---|---|
In 1970, 850cc Minis with engine number 85H101 on had a remote type gearbox case, |
|||
which was fitted with a magic wand type gearlever, held up by a plate underneath |
|||
using 23/24/25/26. A remote control can be fitted changing part 23 and fitting parts 22/27. |
|||
| 1 | 22A1881 | 1 | Nylon speedometer pinion gear, 17 teeth |
| 2 | 2A3624 | 1 | Metal seating bush |
| 3 | DAM8488 | 1 | Speedometer cable to pinion housing Was 28G251 |
| 4 | 2A3628 | 1 | Housing gasket |
| 5 | 22A862 | 1 | Spring U plate |
| 6 | 2A3720 | 1 | Speedo drive to mainshaft gear, 6 teeth |
| 7 | 22G827 | 1 | Reverse fork |
| 8 | 22A169 | 1 | Reverse selector rod |
| 9 | 22G821 | 1 | 1st/2nd selector rod CWE 4 synchro |
| 9 | 22A167 | 1 | 1st/2nd selector rod CWE 3 synchro |
| 10 | 22G822 | 1 | 3rd/4th selector rod CWE 4 synchro |
| 10 | 22A168 | 1 | 3rd/4th selector rod NLA 3 synchro |
| 11 | 22A611 | 1 | 1st/2nd selector fork 3 synchro |
| 11 | 22G889 | 1 | 1st/2nd selector fork 4 synchro |
| 12 | 22A610 | 1 | 3rd/4th selector fork 3/4 synchro |
| 13 | 2A3492 | 3 | Selector fork bolt CWE |
| 14 | CCN108 | 1 | Circlip, lever to pivot pin |
| 15 | 88G222 | 1 | Change speed lever |
| 16 | WKN404 | 1 | Lever keyway |
| 17 | 2A3335 | 3 | Lever securing bolt One each for 15/20/21 levers |
| 18 | 22A208 | 1 | Change speed gate |
| 19 | 88G231 | 1 | Gear change shaft |
| 20 | 88G224 | 1 | Gear change knuckle, male |
| 21 | 88G223 | 1 | Gear change knuckle, female |
| 22 | 22A253 | 1 | Remote change shaft, when remote housing fitted CWE |
| 23 | 88G233 | 1 | Gearchange for magic wand case NLA |
| 23 | 88G553 | 1 | Remote gear change shaft (non remote housing) 85H engine 1970 on |
| 24 | 2A3467 | 1 | Gearlever thrust button, plus magic wand..pre 1967 85H engine 1970 on |
| 25 | 2A3390 | 1 | Gearlever spring, plus magic wand..pre 1967 85H engine 1970 on |
| 26 | 22A1832 | 1 | Gearlever seat and locating pad, NLA 85H engine 1970 on |
| 27 | 22G79 | 1 | Ball end lever crank CWE |
| 28 | 22G259 | 1 | Pivot pin for 22A1832 and 22G79 |
| 29 | 22G411 | 3 | Detent plunger |
| 30 | 2A3647 | 4 | Detent spring |
| 31 | 22A387 | 2 | Detent plug |
| 32 | AED172 | 3 | Sealing washer |
| 33 | 22A149 | 1 | Detent plug for reverse |
| 34 | 22A191 | 1 | Reverse detent plunger |
| 35 | 13H577 | 1 | Oil seal for remote gear shaft |
