Classic Mini Cooper Gearbox Transmission Case Parts
Records - of
# |
Part No |
Qty |
Description |
|---|---|---|---|
| 2 | GHF102 | 5 | Bolt, Front block to gearbox |
| 3 | GHF101 | 4 | Gearbox Case, rear block to gearbox set screw |
| 4 | BH604140 | 1 | Bolt for dowl on front |
| 5 | 22H983 | 1 | Engine to gearbox locating dowel |
| 6 | FHS2410 | 2 | Stud, Rear for thick flange block |
| 6 | FHS2409 | 2 | Stud, rear for thin flange block |
| 7 | 2A3502 | 2 | Bush Shift Rod |
| 8 | 13H577 | 1 | Gear change oil seal |
| 9 | 53K266 | 4 | Stud For Diff Housing 4.5", 2 only for Rod Change |
| 10 | 22G1834 | 2 | Stud For Diff Housing, 3" x .375" thread |
| 10 | 53K1471 | 3 | Stud For Diff Housing, 3.75" long |
| 11 | 22A152 | 6 | Long stud for Flywheel Housing - alternative DAM7759 |
| 12 | 53K547 | 3 | Short stud for flywheel housing |
| 13 | 53K1474 | 3 | Stud For Speedo Drive Housing Cover |
| 14 | 22A153 | 2 | Dowel for Diff Housing |
| 15 | 22A97 | 2 | Dowel For Flywheel Housing |
| 16 | 22A13 | 2 | Dowel for speedo drive housing |
| 17 | 42H500 | 1 | Diff Housing Lock Tab Rod Change, Left Hand |
| 18 | 22A251 | 1 | Diff housing Lock Tab |
| 19 | 2a3505 | 1 | Upper Gasket for Diff Housing |
| 20 | 2A2506 | 1 | Lower for Diff Housing - Pre-rod change |
| 21 | AHU1672 | 1 | Oil Seal for Rod Change shifter rod was 13H6862 |
| 22 | 13h7848 | 1 | IDLER GEAR BEARING FOR 4 SYNC TRANSMISSIONS 27.05MM (1.0625") OD |
| 22 | 88G302 | 1 | IDLER GEAR BEARING FOR 3 SYNC TRANSMISSIONS 25.5mm (1.004") OD |
| 22 | DAM3745 | 1 | IDLER GEAR BEARING, to convert A+ TO A 34.92mm (1.375") OD and 19mm (.750") ID |
| 22 | AHU1707 | 1 | A+ Idler Gear Bearing 27.05MM (1.0625") OD and 22.5mm (.875") ID |
| 23 | 51K3565 | 1 | Circlip, 4-sync Idler Bearing To Gearbox Case |
| 25 | 22A541 | 1 | Speedo drive housing Gasket |
| 27 | 2A3627 | 1 | Gasket for speedo drive case plate |
| 33 | 22A542 | 2 | Oil Pipe to case and flange gasket |
| 38 | GEG502 | 1 | Gearbox to Engine Gaskets |
| 38 | GUG703049SG | 1 | Classic Mini Block To Gearbox Gasket Set Genuine Type 4 synchro gearboxes only |
| 39 | CAM6548 | 1 | Rigid Type Half Moon Seal Alternate item |
| 39 | 12G2947 | 1 | Half Moon Oil Seal |
