Classic Mini Cooper A' Type Gears
Records - of
# |
Part No |
Qty |
Description |
|---|---|---|---|
Many of the gears are no longer available, part number for reference only. |
|||
| 1 | 22A377 | 1 | Reverse gear CWE |
| 2 | 88G209 | 1 | Reverse gear shaft |
| 3 | 2A3475 | 1 | Reverse gear bush NLA |
| 4 | 22A1371 | 1 | Layshaft |
| 5 | 22G76 | 1 | Laygear for 997cc to 9FSA 28575 |
| 5 | 22G197 | 1 | Laygear for 997cc to 9FSA 28576 on 997cc |
| 5 | 22G204 | 1 | Laygear but uses B type, 1st & reverse 22A1021/22G202 All Cooper and ‘S’ |
| 5 | 22A381 | 1 | Laygear 850cc |
| 6 | 88G396 | 2 | Layshaft bearings |
| 7 | 22G277 | 1 | Spacer sleeve for bearing NLA |
| 8 | 22G278 | 2 | Internal circlips for laygear |
| 9 | 88G324 | 1 | Laygear small thrust washer |
| 10 | 88G325 | 1 | Laygear large thrust washer 123°-124° CWE |
| 10 | 88G326 | 1 | Laygear large thrust washer 125°-126° CWE |
| 10 | 88G327 | 1 | Laygear large thrust washer 127°-128° NLA |
| 11 | 22A416 | 1 | 1st motion shaft to 9F/SA 28575 997 only |
| 11 | 22A588 | 1 | 1st motion shaft (19 teeth) 850cc |
| 11 | 22A592 | 1 | 1st motion shaft (20 teeth) for 22G204 laygear Cooper ‘S’ |
| 12 | 2A3709 | 1 | 1st motion ball bearing |
| 13 | 2A3711 | 1 | Clip for 1st motion ball bearing |
| 14 | 22G70 | 1 | 3rd motion shaft (mainshaft) CWE |
| 15 | 2A3712 | 1 | Mainshaft double ball bearing, very early pre 1962 62mm diameter |
| 15 | AAU1365-RHP | 1 | Mainshaft double ball bearing - German made 65mm diameter |
| 16 | ADU4992 | 1 | Spring ring for double ball bearing was 22G721 |
| 17 | 22G440 | 1 | 1st/2nd synchronizer gear hub |
| 18 | BLS107 | 3 | Synchronizer ball Per hub |
| 19 | 22A367 | 3 | Synchronizer spring Per hub |
| 20 | 22G2033 | 3 | Baulk ring |
| 21 | 22G194 | 1 | 2nd gear (28 teeth) Fits 22G204 laygear |
| 21 | 22A582 | 1 | 2nd gear (28 teeth) 850cc/997cc |
| 22 | 2A3298 | 1 | Bush for 2nd gear |
| 23 | 22A415 | 1 | 3rd gear to 9F/SA 28575 997cc |
| 23 | 22G195 | 1 | 3rd gear (24 teeth) 997/998cc 9F/SA 28576 on All ‘S’ 22G204 laygear |
| 23 | 22A583 | 1 | 3rd gear (23 teeth) 850cc |
| 24 | 2A3290 | 1 | Bush for 3rd gear |
| 25 | 22G97 | 1 | 3rd/4th synchronizer assembly, was 22G358 |
| 26 | 2A3545 | 1 | 1st motion drive gear, use 22G849 with spacer C-STR239 |
| 27 | DAM4000 | 1 | Locktab |
| 28 | 2A3548 | 1 | Nut for 1st motion shaft |
| 29 | 22G943 | 1 | Idler gear, shaft size .750" (19mm) Was equal shaft length |
| 30 | 22A1545 | A/R | Idler gear thrust washer .130-131" (3.30-3.32mm) Green coding |
| 30 | 22A1546 | A/R | Idler gear thrust washer .132-133" (3.35-3.37mm) Black coding |
| 30 | 22A1547 | A/R | Idler gear thrust washer .134-135" (3.40-3.42mm) White coding |
| 30 | 22A1548 | A/R | Idler gear thrust washer .136-137" (3.45-3.47mm) Blue coding |
| 30 | 22A1549 | A/R | Idler gear thrust washer .138-139" (3.50-3.53mm) Red coding |
| 31 | 22A399 | 1 | Final drive pinion 3.76 ratio |
| 32 | DAM6140 | 1 | Locktab |
| 33 | 22G48 | 1 | Mainshaft nut |
| 34 | DAM2377 | 2 | Locktab |
| 35 | 2A3714 | A/R | Locating plate shim .003" thou |
| 35 | 2A3715 | A/R | Locating plate shim .010" thou |
