Possible to post a picture of it Rocky? Steve (CTR)

I have a manifold that I can't find in any of the previous posts.
Can someone identify with numbers:

VAF  AEA 337

Thanks

Keeping this alive...

Hey Hippy!

 No, I don't know it's origins.  But I believe Kevin G is right and it is a 20 degree manifold, and thus is non Mini.  Might be good for parts and pieces on a mini, but the manifold guarantees it's going to interfere with the bulkhead.

Save it for trades maybe?  By the way, does the tag show L and R anywhere?

Best, MSH

for theminimark

Did you find out what the 12G 242 manifold came off?

I have one with the same casting numbers and two 1/14 su carbs on with the numbers AUD 691 on a tag attached.

Looked them up on SU web site but nada.

TTT. keeping it alive. Great info, will have to search my parts boxes once i unpack the house

If the carb angle is 20°, it's definitely off a Sprite/Midget, not any east/west motor (they are all 30°.

TTT and a new mfld Casting number.  12G242  It came to me with 2 HS4 carbs and most of the linkage.  Any ideas, anyone?

Best regards,

MSH

looks like the number of variations could be endless

Just to further clarify or confuse?

//i1225.photobucket.com/albums/ee386/vegardma/IMG_3500.jpg

//i1225.photobucket.com/albums/ee386/vegardma/IMG_3501.jpg

Thanks, but not what I wanted to hear. (don't have any use for Sprite stuff)  For the record, it has a 19-20 degree carb mounting angle, 6" port centers, ring type locaters;  no spacers though.

Steve-that could be a sprite/midget item considering the full complement of emission system ports, spacers on the carb side of the manifold and length of manifold between the carb and the head.  However, I had not noticed the firing order cast in there before. 

seems I can only put one picture up at a time, so here is another:

fonnd this one in a box of stuff that came with my pickup.  casting number 12G 1451 on one runner and CFL or CPL on the other runner.  only other markings are the firing order on the back of the balance tube.

I was thinking about this thread as asilverstein's 997 is trying to come together and the correct manifold wasn't around.  I looked at 2 manifolds I could find.  One is a 1275 s manifold, 12A661 P cast in and AEG 347 stamped into the balance tube.  Both bosses are drilled-crankcase vent and power brake.

I also have a BA62357AEG490 manifold.  I imagine the 6 is supposed to be an 8.  It is a twin 1.5" or 1.75" manifold.

ttt to keep this post from rolling off the Forum

I have a manifold here marked AEA577, I suspect it is a Spridget, can anyone confirm?

I have unearthed a couple at home, I will get some info and photos if they are anything unique or interesting...

Chuck,

Yes, I saw the new listings this morning on Mark's site.  There's some good pictures there, some more recent manifolds.  (More recent meaning only 30 years old instead of 40!)

I got sidetracked developing a chart of A-type gears, but will try to get back to the manifold chart.  It's a case of Mini-ADD; Oooh, look, an old gearbox over there.