Your Order / Return May Be Delayed Due To Shipping Irregularities. Read More
We have detected you're not on the correct site for the car you have selected! Click the green button below to go to the correct site.
Select your car:
Select
Select
Select
Classic Mini Cooper Turn Signal Assembly Clear Plastic Lens Dual Element
Classic Mini Cooper Turn Signal Assembly Clear Plastic Lens Dual Element
Selected: 1B9100MS
Plastic Lens sold each
Part No:
1B9100MS
Internet Price
$21.98
Select variations below for more information:
The reasons to replace the entire assembly vary, but basically if you want your turn signal lamps to operate and look like new, you can't beat new! These are complete assemblies including clear PLASTIC lens, bulb, chrome trim ring socket and rubber boot. 'Dual element' means that it will work for both turn signal and parking lights.
Question:
Hello,
I have a 1972 Austin Mini 1000. The right front turn indicator stopped working so I went to change out the bulb in both front indicators. WHen I did this I learned that the previous owner must have changed out one of the assemblies since the left side uses a different bulb then the right side. So I am going to replace the entire indicator assembly on both sides so that the bulb type will be the same for future replacement. Will this assembly fit into a 1972 MkIII Mini?
Also, the glass lenses I have are in good condition. Can I swap out the glass lens with the plastic lens that come with this assembly OR do I need to purchase a glass assembly?
Thanks you for your help.
Kind regards,
Answer:
I believe the plastic and glass lenses are interchangeable.
Hope that helps, Mini Mania
Hope that helps, Mini Mania
The reasons to replace the entire assembly vary, but basically if you want your turn signal lamps to operate and look like new, you can't beat new! These are complete assemblies including clear PLASTIC lens, bulb, chrome trim ring socket and rubber boot. 'Dual element' means that it will work for both turn signal and parking lights.
Question:
Hello,
I have a 1972 Austin Mini 1000. The right front turn indicator stopped working so I went to change out the bulb in both front indicators. WHen I did this I learned that the previous owner must have changed out one of the assemblies since the left side uses a different bulb then the right side. So I am going to replace the entire indicator assembly on both sides so that the bulb type will be the same for future replacement. Will this assembly fit into a 1972 MkIII Mini?
Also, the glass lenses I have are in good condition. Can I swap out the glass lens with the plastic lens that come with this assembly OR do I need to purchase a glass assembly?
Thanks you for your help.
Kind regards,
Answer:
I believe the plastic and glass lenses are interchangeable.
Hope that helps, Mini Mania
Hope that helps, Mini Mania
Recommended items for: 1B9100MS
Also Purchased with: 1B9100MS
Loading...
Loading...