The K&N Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Mini Cooper and Cooper Clubman models. Designed to improve throttle response, engine sound and horsepower.
This intake is Street legal in all US States for the models listed above. CARB EO Number D-269-38.
MORE K&N PRODUCTS!
See our Mini Cooper K&N Application Guide for more K&N products.
MORE INTAKE UPGRADES
see our Mini Cooper Intake Upgrade Application Guide for other options
Fits the following Cooper non-S models with the N12 engine:
2007-2010 R56 MINI Cooper Hatchback (non-S)
2008-2009 R55 MINI Cooper Clubman (non-S)
This intake is Street legal in all US States for the models listed above. CARB EO Number D-269-38.
US Models only, not compatible with non-US Euro models.
The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smooths and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. This air intake comes with a chrome topped K&N high-flow air filter and a stylish heat shield with the K&N logo and window that installs into the previous air box space.
Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive textured black powder-coat finish that's made to last and it accommodates the factory mass air sensor. The oversized cylinder shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions.
This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, pliers, ratchet set and some wrenches.
- Guaranteed to increase horsepower
- Designed to improve throttle response and engine sound
- Low restriction aluminum tube
- Easy to install, usually in 90 minutes or less
- Filter lasts up to 100,000 miles before service is required
- Replaces stock air intake system
- Washable and reusable lifetime air filter
- K&N Million Mile Limited Warranty
K&N Engineering, Inc., requires cleaning the intake system’s air filter element every 100,000 miles. When used in dusty or off-road environments, K&N filters will require cleaning more often. We recommend that you visually inspect your filter once every 25,000 miles to determine if the screen is still visible. When the screen is no longer visible on some place on the filter element, it is time to clean it.
For care and maintenance of the filter in this kit, see K&N Filter Care Kit.
See installation instructions.
Fits the following Cooper non-S models with the N12 engine:
2007-2010 R56 MINI Cooper Hatchback (non-S)
2008-2009 R55 MINI Cooper Clubman (non-S)
This intake is Street legal in all US States for the models listed above. CARB EO Number D-269-38.
US Models only, not compatible with non-US Euro models.
The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smooths and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. This air intake comes with a chrome topped K&N high-flow air filter and a stylish heat shield with the K&N logo and window that installs into the previous air box space.
Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive textured black powder-coat finish that's made to last and it accommodates the factory mass air sensor. The oversized cylinder shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions.
This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, pliers, ratchet set and some wrenches.
- Guaranteed to increase horsepower
- Designed to improve throttle response and engine sound
- Low restriction aluminum tube
- Easy to install, usually in 90 minutes or less
- Filter lasts up to 100,000 miles before service is required
- Replaces stock air intake system
- Washable and reusable lifetime air filter
- K&N Million Mile Limited Warranty
K&N Engineering, Inc., requires cleaning the intake system’s air filter element every 100,000 miles. When used in dusty or off-road environments, K&N filters will require cleaning more often. We recommend that you visually inspect your filter once every 25,000 miles to determine if the screen is still visible. When the screen is no longer visible on some place on the filter element, it is time to clean it.
For care and maintenance of the filter in this kit, see K&N Filter Care Kit.
See installation instructions.

Loading...

Loading...

Loading...

Loading...

Loading...