Hi-Flow Induction System from NM Engineering with the CARBON FIBER Intake Snorkel (Inlet Tube) and a Paper Filter.  This intake upgrade provides higher air flow into the engine which is the first step towards increased power and greater engine efficiency.  This kit uses the Paper filter for those that prefer the disposable paper filter over the re-usable oiled filter that requires periodic cleaning.  Same performance and price as the oiled filber.

NM Engineering introduces the complete air intake system for the turbocharged MINI Cooper S models. Unlike some competitors, NM’s intake features an integrated larger turbo inlet tube. The stainless brackets, hardwares and silicone couplings were all designed, engineered and manufactured to fit and perform.

This Induction Kit is CARB APPROVED!

Fits the following Cooper S models with the N14 engine:

2007-2010 R56 MINI Cooper S Hardtop.
2008-2010 R55 MINI Cooper S Clubman.
2009-2010 R57 MINI Cooper S Convertible.

Also fits JCW models with the N14 engine (thru 2012).
Compatible with USA and Canadian models. (NOT for Euro models).

The Open Air Box System gives you an unrestricted 360° of air intake, compared to the OEM sealed air box which has a flat filter and a tube fed air source.

During Research and Development, we installed multiple temperature probes around the engine compartment and what we found was the inside temperature matched the ambient temperature after the vehicle surpassed 20 mph.

The Mass Air Flow (MAF) sensor also showed that the Open Air Box Intake generated a higher volume of incoming air.

The end result being Increased Horsepower and Increased Fuel Efficiency.

Note: The height of this induction kit is the same height as the OEM Cooper S Airbox. If your strut bar clears the stock airbox, it will clear this Induction system!

Other Products You May Want to Purchase.

• Filter Maintenance kit - G2NME2125 .
• Replacement Filter Element - G2NME2121.

Hi-Flow Induction System from NM Engineering with the BLUE Intake Snorkel (Inlet Tube) and a Paper Filter.  This intake upgrade provides higher air flow into the engine which is the first step towards increased power and greater engine efficiency.  This kit uses the Paper filter for those that prefer the disposable paper filter over the re-usable oiled filter that requires periodic cleaning.  Same performance and price as the oiled filber.

NM Engineering introduces the complete air intake system for the turbocharged MINI Cooper S models. Unlike some competitors, NM’s intake features an integrated larger turbo inlet tube. The stainless brackets, hardwares and silicone couplings were all designed, engineered and manufactured to fit and perform.

This Induction Kit is CARB APPROVED!

Fits the following Cooper S models with the N14 engine:

2007-2010 R56 MINI Cooper S Hardtop.
2008-2010 R55 MINI Cooper S Clubman.
2009-2010 R57 MINI Cooper S Convertible.

Also fits JCW models with the N14 engine (thru 2012).

The Open Air Box System gives you an unrestricted 360° of air intake, compared to the OEM sealed air box which has a flat filter and a tube fed air source.

During Research and Development, we installed multiple temperature probes around the engine compartment and what we found was the inside temperature matched the ambient temperature after the vehicle surpassed 20 mph.

The Mass Air Flow (MAF) sensor also showed that the Open Air Box Intake generated a higher volume of incoming air.

The end result being Increased Horsepower and Increased Fuel Efficiency.

Note: The height of this induction kit is the same height as the OEM Cooper S Airbox. If your strut bar clears the stock airbox, it will clear this Induction system!

Other Products You May Want to Purchase.

• Filter Maintenance kit - G2NME2125 .
• Replacement Filter Element - G2NME2121.

Hi-Flow Induction System from NM Engineering with the BLACK Intake Snorkel (Inlet Tube) and a Paper Filter.  This intake upgrade provides higher air flow into the engine which is the first step towards increased power and greater engine efficiency.  This kit uses the Paper filter for those that prefer the disposable paper filter over the re-usable oiled filter that requires periodic cleaning.  Same performance and price as the oiled filber.

NM Engineering introduces the complete air intake system for the turbocharged MINI Cooper S models. Unlike some competitors, NM’s intake features an integrated larger turbo inlet tube. The stainless brackets, hardwares and silicone couplings were all designed, engineered and manufactured to fit and perform.

This Induction Kit is CARB APPROVED!

Fits the following Cooper S models with the N14 engine:

2007-2010 R56 MINI Cooper S Hardtop.
2008-2010 R55 MINI Cooper S Clubman.
2009-2010 R57 MINI Cooper S Convertible.

Also fits JCW models with the N14 engine (thru 2012).
Compatible with USA and Canadian models. (NOT for Euro models).

The Open Air Box System gives you an unrestricted 360° of air intake, compared to the OEM sealed air box which has a flat filter and a tube fed air source.

During Research and Development, we installed multiple temperature probes around the engine compartment and what we found was the inside temperature matched the ambient temperature after the vehicle surpassed 20 mph.

The Mass Air Flow (MAF) sensor also showed that the Open Air Box Intake generated a higher volume of incoming air.

The end result being Increased Horsepower and Increased Fuel Efficiency.

Note: The height of this induction kit is the same height as the OEM Cooper S Airbox. If your strut bar clears the stock airbox, it will clear this Induction system!

Other Products You May Want to Purchase.

• Filter Maintenance kit - G2NME2125 .
• Replacement Filter Element - G2NME2121.

Hi-Flow Induction System from NM Engineering with the BLUE Intake Snorkel (Inlet Tube) and a re-usable Filter.  This intake upgrade provides higher air flow into the engine which is the first step towards increased power and greater engine efficiency.

NM Engineering introduces the complete air intake system for the turbocharged MINI Cooper S models. Unlike some competitors, NM’s intake features an integrated larger turbo inlet tube. The stainless brackets, hardwares and silicone couplings were all designed, engineered and manufactured to fit and perform.

This Induction Kit is CARB APPROVED!

Fits the following Cooper S models with the N14 engine:

2007-2010 R56 MINI Cooper S Hardtop.
2008-2010 R55 MINI Cooper S Clubman.
2009-2010 R57 MINI Cooper S Convertible.

Also fits JCW models with the N14 engine (thru 2012).
Compatible with USA and Canadian models. (NOT for Euro models).

The Open Air Box System gives you an unrestricted 360° of air intake, compared to the OEM sealed air box which has a flat filter and a tube fed air source.

During Research and Development, we installed multiple temperature probes around the engine compartment and what we found was the inside temperature matched the ambient temperature after the vehicle surpassed 20 mph.

The Mass Air Flow (MAF) sensor also showed that the Open Air Box Intake generated a higher volume of incoming air.

The end result being Increased Horsepower and Increased Fuel Efficiency.

Note: The height of this induction kit is the same height as the OEM Cooper S Airbox. If your strut bar clears the stock airbox, it will clear this Induction system!

Other Products You May Want to Purchase.

• Filter Maintenance kit - G2NME2125 .
• Replacement Filter Element - G2NME2121.

Hi-Flow Induction System from NM Engineering with the CARBON FIBER Intake Snorkel (Inlet Tube) and a re-usable Filter.  This intake upgrade provides higher air flow into the engine which is the first step towards increased power and greater engine efficiency.

NM Engineering introduces the complete air intake system for the turbocharged MINI Cooper S models. Unlike some competitors, NM’s intake features an integrated larger turbo inlet tube. The stainless brackets, hardwares and silicone couplings were all designed, engineered and manufactured to fit and perform.

This Induction Kit is CARB APPROVED!

Fits the following Cooper S models with the N14 engine:>

2007-2010 R56 MINI Cooper S Hardtop.
2008-2010 R55 MINI Cooper S Clubman.
2009-2010 R57 MINI Cooper S Convertible.

Also fits JCW models with the N14 engine (thru 2012).

The Open Air Box System gives you an unrestricted 360° of air intake, compared to the OEM sealed air box which has a flat filter and a tube fed air source.

During Research and Development, we installed multiple temperature probes around the engine compartment and what we found was the inside temperature matched the ambient temperature after the vehicle surpassed 20 mph.

The Mass Air Flow (MAF) sensor also showed that the Open Air Box Intake generated a higher volume of incoming air.

The end result being Increased Horsepower and> Increased Fuel Efficiency.

Note: The height of this induction kit is the same height as the OEM Cooper S Airbox. If your strut bar clears the stock airbox, it will clear this Induction system!

Other Products You May Want to Purchase.

• Filter Maintenance kit - G2NME2125 .
• Replacement Filter Element - G2NME2121.

Hi-Flow Induction System from NM Engineering with the BLACK Intake Snorkel (Inlet Tube) and a re-usable Filter.  This intake upgrade provides higher air flow into the engine which is the first step towards increased power and greater engine efficiency.

NM Engineering introduces the complete air intake system for the turbocharged MINI Cooper S models. Unlike some competitors, NM’s intake features an integrated larger turbo inlet tube. The stainless brackets, hardwares and silicone couplings were all designed, engineered and manufactured to fit and perform.

This Induction Kit is CARB APPROVED!

Fits the following Cooper S models with the N14 engine:

2007-2010 R56 MINI Cooper S Hardtop.
2008-2010 R55 MINI Cooper S Clubman.
2009-2010 R57 MINI Cooper S Convertible.

Also fits JCW models with the N14 engine (thru 2012).

The Open Air Box System gives you an unrestricted 360° of air intake, compared to the OEM sealed air box which has a flat filter and a tube fed air source.

During Research and Development, we installed multiple temperature probes around the engine compartment and what we found was the inside temperature matched the ambient temperature after the vehicle surpassed 20 mph.

The Mass Air Flow (MAF) sensor also showed that the Open Air Box Intake generated a higher volume of incoming air.

The end result being Increased Horsepower and Increased Fuel Efficiency.

Note: The height of this induction kit is the same height as the OEM Cooper S Airbox. If your strut bar clears the stock airbox, it will clear this Induction system!

Other Products You May Want to Purchase.

• Filter Maintenance kit - G2NME2125 .
• Replacement Filter Element - G2NME2121.