Performance Ignition Coils from Ignition Projects for your Gen2 Mini!

IP High Performance Ignition Coils are designed with our Patented Technology that produces more spark energy than stock coils and also generate an ultra-fast multi spark discharge of 10 sparks up to the highest RPM. The spark amperage is increased 100%, allowing the spark to reach many more molecules and therefore accelerate the ignition and combustion process. This is extremely important in forced induction applications but also improves the performance of normally aspirated engines.  

Each kit includes a set of 4 coil packs.

Fits the following Cooper S models with the N14 and N18 engines:

2007-2013 R56 MINI Cooper S Hardtop
2008-2014 R55 MINI Cooper S Clubman
2009-2015 R57 MINI Cooper S Convertible
2012-2015 R58 MINI Cooper S Coupe
2012-2015 R59 MINI Cooper S Roadster
2011-2016 R60 MINI Cooper S Countryman
2013-2016 R61 MINI Cooper S Paceman

Select accordingly.

Installation is easy. Direct bolt-in to the engine, no splicing or cutting into stock wiring, simply replace the stock coils with our Plasma Direct Coils and ready to go!

See Technical Paper. 

NOTE:  When installing these coil packs, the female electrical connector from the harness must be completely seated into the ignition coil before the connector locking mechanism is rotated into place.

We worked with various Professional Race Teams in Road, Circuit and Drifting to conduct research and development. Our products are designed to perform and it’s important to have our products being abused through real racing conditions. 

All IP Ignition Coil products are direct plug in replacement. No modification required for installation. We offer a One-year warranty on all IP Ignition Coils. Whether it’s a daily driver or a competition race car, our One-year warranty has you covered! 

NOTE: Some States (like California) have ever tightening requirements for emissions testing and inspections. Always check your current local regulations on compliance for street use.

Performance IP Multi-Spark Ignition Coils from Ignition Projects for your Gen2 Mini! Better spark = better combustion = MORE POWER!

Ignition Project's Multi-spark technology creates a secondary voltage and produces a 46% increase in secondary current. This technology allows the coils to recharge faster producing two sparks within one millisecond to ensure complete and consistent combustion. With constant research and development, Ignition Projects built the Multi-spark system directly into the ignition coil without using an external discharge box.

Ignition Projects built the Multi-spark system directly into the ignition coil without using an external discharge box. The Multi-spark technology creates a secondary voltage and produces a 46% increase in secondary current. This technology allows the coils to recharge faster producing two sparks within one millisecond to ensure complete and consistent combustion.

Each kit includes a set of 4 coil packs.

Fits the following models:

2007-2013 R56 MINI Cooper and Cooper S Hardtop
2008-2014 R55 MINI Cooper and Cooper S Clubman
2009-2015 R57 MINI Cooper and Cooper S Convertible
2012-2015 R58 MINI Cooper and Cooper S Coupe
2012-2015 R59 MINI Cooper and Cooper S Roadster
2011-2016 R60 MINI Cooper and Cooper S Countryman
2013-2016 R61 MINI Cooper and Cooper S Paceman

Installation is easy. Direct bolt-in to the engine, no splicing or cutting into stock wiring, simply replace the stock coils with our Plasma Direct Coils and ready to go!

See Technical Paper.  

NOTE:  When installing these coil packs, the female electrical connector from the harness must be completely seated into the ignition coil before the connector locking mechanism is rotated into place.

We worked with various Professional Race Teams in Road, Circuit and Drifting to conduct research and development. Our products are designed to perform and it’s important to have our products being abused through real racing conditions. 

Engineered in Japan, Handmade in USA. Ignition Projects IP Coils are designed in Japan and handmade at our facility located in Tustin, California. To ensure the highest level of quality, every product is tested with industrial grade oscilloscope before shipping.

All IP Ignition Coil products are direct plug in replacement. No modification required for installation. We offer a One-year warranty on all IP Ignition Coils. Whether it’s a daily driver or a competition race car, our One-year warranty has you covered! 

NOTE: Some States (like California) have ever tightening requirements for emissions testing and inspections. Always check your current local regulations on compliance for street use.

Performance IP-R Ignition Coils from Ignition Projects for your Gen2 Mini! Better spark = better combustion = MORE POWER!

Ignition Project's Multi-spark technology creates a secondary voltage and produces a 46% increase in secondary current. This technology allows the coils to recharge faster producing two sparks within one millisecond to ensure complete and consistent combustion. With constant research and development, Ignition Projects built the Multi-spark system directly into the ignition coil without using an external discharge box.

Each kit includes a set of 4 coil packs.

Fits the following Cooper S models with the N14 and N18 engines:

2007-2013 R56 MINI Cooper S Hardtop
2008-2014 R55 MINI Cooper S Clubman
2009-2015 R57 MINI Cooper S Convertible
2012-2015 R58 MINI Cooper S Coupe
2012-2015 R59 MINI Cooper S Roadster
2011-2016 R60 MINI Cooper S Countryman
2013-2016 R61 MINI Cooper S Paceman

Select accordingly.

Installation is easy. Direct bolt-in to the engine, no splicing or cutting into stock wiring, simply replace the stock coils with our Plasma Direct Coils and ready to go!

See Technical Paper.  

NOTE:  When installing these coil packs, the female electrical connector from the harness must be completely seated into the ignition coil before the connector locking mechanism is rotated into place.

We worked with various Professional Race Teams in Road, Circuit and Drifting to conduct research and development. Our products are designed to perform and it’s important to have our products being abused through real racing conditions. 

Engineered in Japan, Handmade in USA. Ignition Projects IP Coils are designed in Japan and handmade at our facility located in Tustin, California. To ensure the highest level of quality, every product is tested with industrial grade oscilloscope before shipping.

All IP Ignition Coil products are direct plug in replacement. No modification required for installation. We offer a One-year warranty on all IP Ignition Coils. Whether it’s a daily driver or a competition race car, our One-year warranty has you covered! 

NOTE: Some States (like California) have ever tightening requirements for emissions testing and inspections. Always check your current local regulations on compliance for street use.