Factory replacement Bolts for the Crankshaft Main Bearings which is integrated into the Ladder Frame or Bed Plate. This is a set of 10 Bolts with washers (M9 x 115) for the Main Bearing. MINI specifies these bolts to be replaced when servicing the crankshaft and bearings.

Fits the following Cooper (non-S) models with the N12 or N14 engines:

2007-2013 R56 MINI Cooper Hardtop
2008-2014 R55 MINI Cooper Clubman
2009-2015 R57 MINI Cooper Convertible 
2012-2015 R58 MINI Cooper Coupe
2012-2015 R59 MINI Cooper Roadster
2011-2016 R60 MINI Cooper Countryman
2013-2016 R61 MINI Cooper Paceman

Apply a sealing bead on the upper and lower crankcase section (bedplate) with Loctite 5970 sealing compound. 

Main Bearing Bolts Torque:

• Jointing Torque 22.1 ft lbs (30 Nm)
• Angle of rotation 150°

Main Bearing Bolts (1-10) Tightening Sequence

Fits the following:

2007-2013 R56 MINI Cooper and Cooper S Hardtop
2008-2014 R55 MINI Cooper and Cooper S Clubman
2009-2015 R57 MINI Cooper and Cooper S Convertible 
2012-2015 R58 MINI Cooper and Cooper S Coupe
2012-2015 R59 MINI Cooper and Cooper S Roadster
2011-2016 R60 MINI Cooper and Cooper S Countryman
2013-2016 R61 MINI Cooper and Cooper S Paceman

Apply a sealing bead on the upper and lower crankcase section (bedplate) with Loctite 5970 sealing compound. 

Bedplate Bolts Torque:

• Jointing Torque 9 Nm

Bedplate Bolts Tightening Sequence

MINI Factory replacement Bolts for Crankshaft Main Bearings. Main Bearings are integrated into the engine block and ladder frame or bed plate.

This is a set of 10 Bolts (M9 x 115) for the Main Bearing. MINI specifies replacing these bolts when servicing the crankshaft and bearings.

Fits the following Cooper S models with the N14 engine:

2007 up to 10/2008 R56 MINI Cooper S Hatchback
2008 up to 10/2008 R55 MINI Cooper S Clubman
2009 up to 10/2008 R57 MINI Cooper S Convertible

Apply a sealing bead on the upper and lower crankcase section (bedplate) with Loctite 5970 sealing compound. 

Main Bearing Bolts Torque:

• Jointing Torque 22.1 ft lbs (30 Nm)
• Angle of rotation 150°

Main Bearing Bolts (1-10) Tightening Sequence

MINI Factory replacement Bolts for Crankshaft Main Bearings. Main Bearings are integrated into the engine block and ladder frame or bed plate.

This is a set of 10 Bolts with washers (M9 x 115) for the Main Bearing. MINI specifies replacing these bolts when servicing the crankshaft and bearings.

Fits the following Cooper S models with the N18 engine:

10/2008-2013 R56 MINI Cooper S Hatchback
10/2008-2014 R55 MINI Cooper S Clubman
10/2008-2015 R57 MINI Cooper S Convertible
2012-2015 R58 MINI Cooper S Coupe
2012-2015 R59 MINI Cooper S Roadster
2011-2016 R60 MINI Cooper S Countryman
2013-2016 R61 MINI Cooper S Paceman

Apply a sealing bead on the upper and lower crankcase section (bedplate) with Loctite 5970 sealing compound. 

Main Bearing Bolts Torque:

• Jointing Torque 22.1 ft lbs (30 Nm)
• Angle of rotation 150°

Main Bearing Bolts (1-10) Tightening Sequence