Fits the following Cooper S models:

2007-2013 R56 Cooper S Hatchback
2008-2014 R55 Cooper S Clubman
2009-2015 R57 Cooper S Convertible
2011-2016 R60 Cooper S Countryman
2012-2015 R58 Cooper S Coupe
2012-2015 R59 Cooper S Roadster  
2013-2016 R61 Cooper S Paceman

Tools are 'Special Order' and non-returnable

Fits the following Cooper (non-S) models:

2007-2013 R56 MINI Cooper Hardtop
2008-2014 R55 MINI Cooper Clubman
2009-2015 R57 MINI Cooper Convertible 
2012-2015 R58 MINI Cooper Coupe
2012-2015 R59 MINI Cooper Roadster
2011-2016 R60 MINI Cooper Countryman
2013-2016 R61 MINI Cooper Paceman

NOTE:  Actual tool may vary from the image shown. 

Tools are 'Special Order' and non-returnable

MINI Factory Clutch tools # 212 170 and 210 010 for the Manual Transmission in the MINI Cooper S models with the N18 engine.

This tool is used to remove and install the self adjusting clutch.  The main tool will apply and relieve spring tension as the clutch pressure plate is removed and installed.  This tool remains on the pressure plate during removal from the flywheel, and also during installation.  (Only insert this tool in the area of the riveting between pressure plate and spring on the cover.)  The small tool is inserted into the recess on the cover to disable the readjustment of the clutch.

Fits the following models with the N18 engine:

2011-2013 R56 MINI Cooper S Hardtop
2011-2014 R55 MINI Cooper S Clubman
2011-2015 R57 MINI Cooper S Convertible 
2012-2015 R58 MINI Cooper S Coupe
2012-2015 R59 MINI Cooper S Roadster
2011-2016 R60 MINI Cooper S Countryman
2013-2016 R61 MINI Cooper S Paceman

Tools are 'Special Order' and non-returnable

For the following models with Manual Transmission:

2007-2013 R56 MINI Cooper and Cooper S Hardtop
2008-2014 R55 MINI Cooper and Cooper S Clubman
2009-2015 R57 MINI Cooper and Cooper S Convertible 
2012-2015 R58 MINI Cooper and Cooper S Coupe
2012-2015 R59 MINI Cooper and Cooper S Roadster
2011-2016 R60 MINI Cooper and Cooper S Countryman
2013-2016 R61 MINI Cooper and Cooper S Paceman

NOTE:

Please confirm that the oil pan on your engine has the curved end as pictured above. Some models may have a more square bottom oil pan that my interfere with this tool.