QUAD Driving Light Brackets for your new MINI! Laser cut from 304 Stainless steel, then Tig welded to perfection. They mount to the bumper support using the factory bolts. Finished in Texture black powder coat. Comes complete with all SS hardware and instructions to install. Lights are NOT included.

Fits the following Cooper non-S models:

2011-2016 R60 MINI Cooper Countryman
2013-2016 R61 MINI Cooper Paceman

NOTES:

• Brackets for Cooper is different from Cooper S
• Available for Dual lights or Quad lights
• Requires holes / slots to be cut in the grille
• These brackets are designed to accept the standard 'post mount' type lights. 

Quad Light Bracket

This is a five piece Quad light bar kit. Includes left and right brackets, two center brackets and one radius bar to match the curve of the grill perfectly.

They mount to the bumper support using the factory bolts. There is NO DRILLING or removal of any bumper parts required to install. They are finished in black powder coat. Grill must be trimmed. Center clamp bracket shown in picture 2. Comes with complete instructions and grill template.

Grille must be trimmed.

The mounting hole for the driving lights is an oblong opening at 3/8" wide.

AFTERMARKET DRIVING LIGHT BRACKETS APPLICATION GUIDE

DUAL Driving Light Brackets for your new MINI! Laser cut from 304 Stainless steel, then Tig welded to perfection. They mount to the bumper support using the factory bolts. Finished in Texture black powder coat. Comes complete with all SS hardware and instructions to install. Lights are NOT included.

Fits the following Cooper non-S models:

2011-2016 R60 MINI Cooper Countryman
2013-2016 R61 MINI Cooper Paceman

NOTES:

• Brackets for Cooper is different from Cooper S
• Available for Dual lights or Quad lights
• Requires holes / slots to be cut in the grille
• These brackets are designed to accept the standard 'post mount' type lights. 

Dual Light Brackets

These are driving light brackets for the Mini Coopers and Mini Clubman. (Lights not included.)

They mount to the bumper support using the factory bolts. Finished in black powdercoat.

Grille must be trimmed.

The mounting hole for the driving lights is an oblong opening at 3/8" wide.

AFTERMARKET DRIVING LIGHT BRACKETS APPLICATION GUIDE