Select Your Car Type to Ensure Proper Part Fitment

Fits EARLY YEARS of F56 and F57 Hatchbacks Made up to March 2018

OEM Sport Stripes Roof & Body | Gen3 MINI Cooper F56 F57 Early Year Models

Share your own image!

OEM Sport Stripes Roof & Body | Gen3 MINI Cooper F56 F57 Early Year Models

Select a Item below for more info:

Body Kit White F56 Hardtop & F57 Convertible

$170.70

Body Kit Red F56 Hardtop & F57 Convertible

$159.95

Roof Kit White F56 Hardtop

$162.94

Roof Kit Black F56 Hardtop

$149.99

Roof Kit Red F56 Hardtop

$175.99

Body Kit Black F56 Hardtop & F57 Convertible

$165.57

Alternate Products

Pair of OEM Bonnet Stripes OEM pair | Gen3 All Mini Cooper F54 F55 F56 F57 F60 models

Sport Stripes from the MINI Factory. Body kits and Roof kits are sold separately.

The Sport Stripes (body kit) run parallel, over the bonnet and the rear trunk lid. The Sport Stripes for the roof compliment the sport stripes for the bonnet and boot. The product is made of high quality foil and they are available in black, white, or red. The material is fully dyed to ensure a durability and high colorfastness.

Fits the EARY YEAR models manufactured until March of 2018:

2014-2018 F56 MINI Cooper and Cooper S Hardtop
2016-2018 F57 MINI Cooper and Cooper S Convertible

Body kits and Roof kits are sold separately:

Body Kit includes stripes for the bonnet and the tailgate only
Roof Kit includes stripes for the roof only

Select accordingly.

Sport Stripes Application Guide

BODY	YEAR	BODY KIT			ROOF KIT
BODY	YEAR	BLACK	WHITE	RED	BLACK	WHITE	RED
HARDTOP F56	2014 - 03/2018	G3NMA1131	G3NMA1130	G3NMA1132	G3NMA1134	G3NMA1133	G3NMA1135
HARDTOP F56	03/2018+	G3NMA1231	G3NMA1230	G3NMA1232	G3NMA1134	G3NMA1133	G3NMA1135
CONVERTIBLE F57	2016 - 03/2018	G3NMA1131	G3NMA1130	G3NMA1132
CONVERTIBLE F57	03/2018+	G3NMA1231	G3NMA1230	G3NMA1232
HARDTOP F55 4-DOOR	2015 - 03/2018	G3NMA1137	G3NMA1136	G3NMA1138	G3NMA1140	G3NMA1139	G3NMA1141
HARDTOP F55 4-DOOR	03/2018+	G3NMA1237	G3NMA1236	G3NMA1238	G3NMA1140	G3NMA1139	G3NMA1141
CLUBMAN F54	2016-2020	G3NMA1142	G3NMA1143	G3NMA1144	G3NMA1145	G3NMA1146	G3NMA1147

Have a Question or Comment of your own? Click here!

Question:

I just received my stripes from you. Surprised there were no instructions or at least hints for installation. Do you have anything like that or link to something like that? Thanks

Answer:

Yes, most of the MINI parts we offer do not include instructions, just like getting parts at the MINI dealership parts counter.

However here are some instructions:

1. Clean the surface thoroughly. Some people use dish detergent to strip the wax but that may not be necessary.

2. Perform a 'dry fit' of the stripes. Use painters tape to outline the position of the stripes so you can repeat the position precisely. It sometimes helps to determine the centerline and measure from it so the stripes are symmetrical.

3. Mix a solution of water in a spray bottle with a couple drops of dish soap.

4. Once the position has been marked with painters tape, and the surface is clean of any foreign matter (bugs, tree sap, etc...), spray the solution on the surface LIBERALLY.

5. Carefully peel off the backing from the stripes without touching the backside surface, and spray the solution LIBERALLY.

6. Position the stripes based on the outline you created with painters tape. The solution should allow you to move the stripes until it is positioned in it's exact location.

7. Use a squeegee or similar (plastic/rubber squeegee or a credit card wrapped in 100% cotton fabric or handkerchief), working from the center out to work out all the bubbles.

8. Allow to dry 24 hours before getting it wet.

Sometimes, you still end up with bubbles. Small ones may disappear as the solution evaporates. If they don't, you can use a sharp needle to poke a small hole to let the air escape.

Please note, once you remove the backing, the stripes cannot be returned for a refund. We recommend professional installation, but it can be done at home.