× 1-800-946-2642 Home My Account Social / Forum Contact My Cart
Shop Now
Select Your Car Type
Your Order / Return May Be Delayed Due To Shipping Irregularities.   Read More
Mini Cooper Water Temperature Port Adapter Flexpod Gen3 F54 F55 F56 F57 F60 thru 2019

Mini Cooper Water Temperature Port Adapter Flexpod Gen3 F54 F55 F56 F57 F60 thru 2019

Mini Cooper Water Temperature Port Adapter Flexpod Gen3 F54 F55 F56 F57 F60 thru 2019

Mini Cooper Water Temperature Port Adapter Flexpod Gen3 F54 F55 F56 F57 F60 thru 2019

Mini Cooper Water Temperature Port Adapter Flexpod Gen3 F54 F55 F56 F57 F60 thru 2019

Mini Cooper Water Temperature Port Adapter Flexpod Gen3 F54 F55 F56 F57 F60 thru 2019

Mini Cooper Water Temperature Port Adapter Flexpod Gen3 F54 F55 F56 F57 F60 thru 2019
Selected: Water Temperature Port Adapter thru 2019
Part No: G3NME7304
$69.95
Qty:
Fits the following:
MINI (2002-Current)
A convenient adapter that greatly simplifies the installation of a water temperature gauge!

The new MINIs all lack a 'real' water temperature gauge. The biggest challenge for installing an aftermarket water temperature gauge is finding a convenient and effective location for the temperature sensor. This 'Hot Link' adapter allows a non-invasive installation of a port for the water temperature sensor, greatly simplifying the installation of a water temperature gauge.

Fits the following models:

2014-2019 F56 MINI Cooper and Cooper S Hardtop
2015-2019 F55 MINI Cooper and Cooper S Hardtop 4-Door
2016-2019 F57 MINI Cooper and Cooper S Convertible
2016-2019 F54 MINI Cooper and Cooper S Clubman
2017-2019 F60 MINI Cooper and Cooper S Countryman

This adapter has a port for the temperature sensor, as well as another outlet port used on MINIs with automatic transmissions. A brass plug is included to plug the second outlet for manual transmission MINIs.

Function

The Hot Link replaces an existing coupling on your coolant line, and offers the benefit of a 1/8 tapped attachement point for adding your temperature probe. This piece will allow you to monitor the health of your vehicle. Use with the FlexPod gauge bracket system to allow a completely reversible installation.

Installation

All you need to do is remove the stock coupling by pulling the two hoses off either side, then put the Hot Link in place and clamp down the supplied worm clamps. A set screw is also included to allow adjustments without leaks.

Designed for 32mm hoses.

Allow 1-2 weeks for delivery.

Loading...
Loading...
Loading...
Loading...
Loading...
Loading...