Classic Mini Dual Brake Master Cylinder Pre 92 Non Servo Stepped Bore

Classic Mini Dual Brake Master Cylinder Pre 92 Non Servo Stepped Bore

Classic Mini Dual Brake Master Cylinder Pre 92 Non Servo Stepped Bore
Selected: GMC227
Classic Mini Dual Brake Master Cylinder Pre 92 Non Servo Stepped Bore
92 & earlier Brake Master Cylinder
Qty:
$144.95
This, one of the latest model dual master cylinders, was introduced in 1985. One of the notable features is the failure switch on the reservoir cap. This master is now also the only recommended replacement for all models from 1980 thru 1992, replacing the GMC173/198 and the GMC192/195. It should also be noted that this master has metric unions (top is 10mm and the bottom is 12mm) and the pipes in this front rear split master are reversed from earlier models; i.e., the bottom pipe feeds the rear brakes and the upper pipe feeds the front brakes.
If you are replacing an earlier master that had UNF pipe ends fitted to it, you'll need parts HU9 and HU2.
Loading...
Loading...
Loading...
Related Technical Articles:
Created: February 24, 2014
Mk1 Mini restoration for a first timer
Classic Mini Brake Upgrade SALE
Created: July 08, 2019
Looking to UPgrade your Classic Mini? Classic Mini enthusiasts just like you say brake UPgrades are a must! Check out these brake UPgrade products NOW on sale.
Fitment of Tandem Brake Master Cylinder - GMC227
Created: March 18, 2005
Classic Mini Cooper later model cars that have dual brake line will have to use this Brake Master Cylinder. These fitting instructions will provide the details to allow fitting to most all Mini Coopers
BRAKES - Split brake systems and adjustable bias valves
Created: December 08, 2000
You can only use the MS72 adjustable brake regulator/bias valve with a front/rear split system. Definitely NOT the diagonal split type (for identification see 'Brakes - Rear brake bias adjustment'). These should have been 'X-ed' at birth.
Loading...
Loading...
Loading...
Recently Viewed Items