Poly-Matrix "Q" compound - Street Pads
These are the pads for the daily driver looking for low dust and low noise. Operates at the lowest noise and dust level of any performance pad. Polymatrix offers high resistance to fade, long wear, and low rotor abrasion.
Characteristics:
- Medium friction, smooth engagement, low abrasion on iron rotors.
- Flat torque curve. Can be used with aluminum rotors on Sprint Car applications.
- Low wear rate at low to medium temperatures
- Medium friction, smooth engagement, low abrasion on iron rotors.
* Enhanced friction ceramic formula features the lowest noise and dust properties available from a performance compound pad.
* Improved friction over OE replacement pad compounds with smooth engagement, long service life, increased fade resistance, and quick recovery time.
Temperature range and overall friction value are the primary considerations for pad selection. The pads must be capable of maintaining the proper amount of friction for stopping power within the temperatures that will be realized on the track during the event. Then, overall wear rate must be considered. For most asphalt and road race applications, compounds in the high temperature ranges over 1000°F range are usually necessary. Dirt track, drag race, and street performance applications usually operate at temperatures between 500° and 1000°F. Keep in mind that these are general ranges, and not absolute values. Many factors and unforeseen influences can affect brake temperatures. The best indicator for pad selection will always be on track performance. If pad fade (friction loss) due to overheating occurs, then improved cooling, a heavier rotor, or a higher temperature range pad may all become necessary.
MINI recommends Brake Fluid replacement every 2 years to maintain the optimum performance of the ABS brake system. For High Performance Brake Fluids, see the following:
- Ate Performance Brake Fluid - Very Good
- Motul Racing Brake Fluid - Better
- Castrol React SRF Brake Fluid - Best
For 'standard' replacement Brake Fluid, see Mini Cooper Brake Fluid Pentosin DOT4.
Poly-Matrix "Q" compound - Street Pads
These are the pads for the daily driver looking for low dust and low noise. Operates at the lowest noise and dust level of any performance pad. Polymatrix offers high resistance to fade, long wear, and low rotor abrasion.
Characteristics:
- Medium friction, smooth engagement, low abrasion on iron rotors.
- Flat torque curve. Can be used with aluminum rotors on Sprint Car applications.
- Low wear rate at low to medium temperatures
- Medium friction, smooth engagement, low abrasion on iron rotors.
* Enhanced friction ceramic formula features the lowest noise and dust properties available from a performance compound pad.
* Improved friction over OE replacement pad compounds with smooth engagement, long service life, increased fade resistance, and quick recovery time.
Temperature range and overall friction value are the primary considerations for pad selection. The pads must be capable of maintaining the proper amount of friction for stopping power within the temperatures that will be realized on the track during the event. Then, overall wear rate must be considered. For most asphalt and road race applications, compounds in the high temperature ranges over 1000°F range are usually necessary. Dirt track, drag race, and street performance applications usually operate at temperatures between 500° and 1000°F. Keep in mind that these are general ranges, and not absolute values. Many factors and unforeseen influences can affect brake temperatures. The best indicator for pad selection will always be on track performance. If pad fade (friction loss) due to overheating occurs, then improved cooling, a heavier rotor, or a higher temperature range pad may all become necessary.
MINI recommends Brake Fluid replacement every 2 years to maintain the optimum performance of the ABS brake system. For High Performance Brake Fluids, see the following:
- Ate Performance Brake Fluid - Very Good
- Motul Racing Brake Fluid - Better
- Castrol React SRF Brake Fluid - Best
For 'standard' replacement Brake Fluid, see Mini Cooper Brake Fluid Pentosin DOT4.
-
NMB2045
-
NMB2081
-
NMA7697
-
NMB2048
-
NMB2049
-
NMB2052
-
NME1018
-
NME1050
-
NME2022
-
NME3002B

Loading...