Motor Engine mounts allow the car's engine to move and absorbs most of the vibration for a smooth ride. Loose engine mounts can also affect performance by sapping the off-the-line performance.

If your MINI is 'maturing' and you decide to freshen up the suspension, don't forget the engine mounts.

Fits the following models with the Manual Transmission:

2002-2006 R53 MINI Cooper S Hardtop
2005-2008 R52 MINI Cooper S Convertible

The hydraulic engine mounts also tend to leak over time reducing it's effectiveness. If you fine some oily fluid residue around the hydraulic mount, it's time for a replacement!

 

MINI Factory replacement Transmission / Gearbox Support Bracket B. This is the mount at the left side (drivers side on US MINIs) of the engine bay.

Support Bracket B

Fits:

2005-2006 R50 MINI Cooper Hatchback Manual transmission
2005-2008 R52 MINI Cooper and Cooper S Convertible Manual transmission

There are one or two components to the Transmission Mount depending on the type of transmission:

1. Support Bracket
2. Support Base Plate (Auto Transmission only)

For the factory Gearbox Mount, see NMG7610-P.

MINI Factory replacement Transmission / Gearbox mount Base Plate. This is the mount at the left side (drivers side on US MINIs) of the engine bay.

Support Base Plate

Fits:

2002-2006 R53 MINI Cooper S Hatchback Automatic transmission
2005-2008 R52 MINI Cooper and Cooper S Convertible Automatic transmission

There are one or two components to the Transmission Mount depending on the type of transmission:

1. Support Bracket
2. Support Base Plate (Auto Transmission only)

For the factory Gearbox Mount, see NMG7610-P.

MINI Factory Replacement HEX BOLT with Flange for the transmission mount. M10 x 45 8.8. 4 required per mount - sold each.

Fits:

2002-2006 R50 MINI Cooper Hatchback
2005-2008 R52 MINI Cooper Convertible

MINI Factory replacement Transmission / Gearbox Support Bracket A. This is the mount at the left side (drivers side on US MINIs) of the engine bay.

Support Bracket A

Fits:

2002-2004 R50 MINI Cooper Hatchback any transmission
2005-2006 R50 MINI Cooper Hatchback Automatic Transmission
2002-2006 R53 MINI Cooper S Hatchback Any Transmission

There are one or two components to the Transmission Mount depending on the type of transmission:

1. Support Bracket
2. Support Base Plate (Auto Transmission only)

For the factory Gearbox Mount, see NMG7610-P.

MINI factory replacement Transmission Mount for the automatic transmission. This is the same transmission mount installed at the MINI dealerships - keep it original!

Fits the following MINI Cooper non-S models with the Automatic Transmission:

2002-2006 R50 MINI Cooper Hardtop
2005-2008 R52 MINI Cooper Convertible 

Engine mounts allow the engine to move and absorbs most of the vibration for a smooth ride. Unfortunately, these engine mounts deteriorate over time and begins to transmit vibration into the cabin. Loose engine mounts can also affect performance by sapping the off-the-line performance.

If your MINI is 'maturing' and you decide to freshen up the suspension, don't forget the engine mounts.

Fits the following models with the Automatic Transmission:

2002-2006 R53 MINI Cooper S Hardtop
2005-2008 R52 MINI Cooper S Convertible

The hydraulic engine mounts also tend to leak over time reducing it's effectiveness. If you fine some oily fluid residue around the hydraulic mount, it's time for a replacement!

 

 

Vehicle Engine and Transmission mounts allow engine to move and absorb most of the vibration for a smooth ride. Unfortunately, any set of engine mounts deteriorate over time and begins to transmit vibration into the cabin. Loose engine mounts can also affect performance by sapping the off-the-line performance.

If your MINI is 'maturing' and you decide to freshen up the suspension, don't forget this Transmission Mount.

Fits the following Cooper non-S models:

2002-2006 R50 MINI Cooper Hardtop
2005-2008 R52 MINI Cooper Convertible

MINI Factory replacement Enging Mount.

Fits the following models:

2002 up to 07/2004 R50 MINI Cooper Hatchback.

Engine mounts allow the engine to move and absorbs most of the vibration for a smooth ride. Unfortunately, these engine mounts deteriorate over time and begins to transmit vibration into the cabin. Loose engine mounts can also affect performance by sapping the off-the-line performance.

If your MINI is 'maturing' and you decide to freshen up the suspension, don't forget the engine mounts.

The hydraulic engine mounts also tend to leak over time reducing it's effectiveness. If you fine some oily fluid residue around the hydraulic mount, it's time for a replacement!