× 1-800-946-2642 Home My Account Social / Forum Contact My Cart
Shop Now
Select Your Car Type
Your Order / Return May Be Delayed Due To Shipping Irregularities.   Read More
MINI Cooper S Supercharger Service Maintenance Kit Gen1 R52 R53

MINI Cooper S Supercharger Service Maintenance Kit Gen1 R52 R53

MINI Cooper S Supercharger Service Maintenance Kit Gen1 R52 R53

MINI Cooper S Supercharger Service Maintenance Kit Gen1 R52 R53

MINI Cooper S Supercharger Service Maintenance Kit Gen1 R52 R53
Part No: NMK5050
$99.99
Qty:
Specially Priced. Discounts Do Not Apply.
Fits the following:
MINI (2002-Current)
Alternate Products
MINI Cooper S Supercharger Service Maintenance Kit Value Line Gen1 R52 R53
$75.99 MINI Cooper S Supercharger Service Maintenance Kit Value Line Gen1 R52 R53

The MINI Eaton supercharger uses a 'lifetime-lubricant' and is not included in the MINI factory regular maintenance schedule. However, we recommend that the supercharger be serviced every 60k to 80k miles. A sealed lubricant can and will degrade over time under the harsh conditions in the engine compartment. 

For the following Cooper S models:

2002-2006 R53 MINI Cooper S Hardtop
2005-2008 R52 MINI Cooper S Convertible

We recommend you service the supercharger when you have other major engine service since the supercharger needs to be removed from the engine in order to service the unit and there is a lot involved to do this.  Here is an article on how to remove the supercharger. This kit includes the supercharger oil, gaskets and seals that should be replaced when servicing the supercharger.

This kit includes:

  • 2 bottles of Eaton approved supercharger lubricant oil
  • MINI factory original Supercharger Inlet gasket
  • MINI factory original Supercharger outlet gasket
  • MINI factory original O-rings (x2) for the water pump & flange

The supercharger fluid is used in the nose compartment where the drive gears for the pulley are located and in the rear compartment where the water pump drive gears are located.

The Supercharger nose gear (pulley side) takes 4.9 oz. and the rear side water pump gear takes about 1.4 oz - as specified by Eaton. Basically, with the supercharger on the motor, you need to use a syringe to suction out all fluid and fill with new as specified. Tighten the reservoir plugs to 8 ft-lbs.

 

 

Also Purchased with: NMK5050
Loading...
Loading...
Loading...
Customer Reviews
Loading...
Loading...
Loading...
Recently Viewed Items